15.2˝ Diagonal LCD TV PICTURE SOUND SET UP TV/AV Operating Instructions TV/TEXT F.P. INDEX HOLD ASPECT TX-15LT2F Model No. Please read these instruction before operating your set and retain them for future reference. English TQBC0377...
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new 15.2 Diagonal LCD TV. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference.
4:3 shelves. mode. • Avoid exposing the TV set to direct sunlight and other • This type of LCD panel damage, is not an operating sources of heat. defect, and as such is not covered by the Panasonic warranty.
Before Operating This Set Supplied Accessories Check the accessories before installations. • • • Operating Instruction book Remote Control Transmitter AC Adaptor & Mains Lead (EUR511270) AC Adaptor: (N0JZHK000006) Mains Lead: (K2CR2DA00006) PICTURE SOUND SET UP TV/AV TV/TEXT F.P. INDEX HOLD DIRECT TV REC ASPECT...
Before Operating This Set Receiver Location Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Quick start Guide 1. Choose Your Connection Type 1. Connecting the TV directly to an aerial only LCD TV Connect the Aerial lead into the TV Aerial socket ( Aerial (Not Supplied) Aerial Input socket Aerial socket Aerial Lead 2. Connection of TV and VCR using Scart and RF LCD TV Connect the AERIAL to the Aerial in socket of the...
Quick start Guide 2. Connecting the AC Adaptor Connect the mains lead to the AC Adaptor. Connect the AC Adaptor DC plug to the DC IN socket. Plug into household mains socket. • Be sure to use the power cord and AC adaptor included in the accessories.
Basic controls Side panel controls and Remote control Aspect Control (see page 28, 29) Sound Mute TV/AVmode Selection Press to select TV, AV input signal modes sequentially. Function selection (see on this page below) Volume Up (+), Down (-)/ Programme Number Up ( ), Down ( ) Picture Menu Volume adjustment which uses these buttons is (see page 24, 25)
Page 9
Basic controls Power (Stand-by) Note: The TV set must first be plugged into the wall outlet • It is also possible to turn the TV set on from STANDBY and turned on at the power switch. mode by pressing the “Direct Programme Number Press this button to turn the TV set On from Standby Selection”...
Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control as shown below to access and adjust features as desired. Press to display “Picture menu” screen.
Page 11
Using the On Screen Displays Press to move the cursor up and down on the menu. Press to access menus, adjust levels or to select from a range of options. The STR button is used with a number of features to store settings after adjustments have been made or options have been set.
Setup menu The setup menu provides access to various advanced features and also to the Tuning menu. SET UP Press to display the setup menu screen. Press to select the menu to adjust. Press to adjust the desired setting. TV/AV Press at any time to go back to watching TV.
Tuning menu Tuning menu overview SET UP Setup menu Press Teletext Off timer PICTURE Move to the Tuning menu option by Text language West SOUND Tuning menu Access using OSD language SET UP TV/AV Access Tuning menu by using TV/TEXT F.P.
Tuning menu Programme edit Use this setting when changing setting of receiving channels or changing the channel display. Turn the TV and sellect the broadcast channel. Follow the steps below to display the Programme edit screen. Selecting the Programme edit on the Tuning menu. Access to the Programme edit screen SET UP Press to display the Setup menu screen.
Page 15
Tuning menu Deleting, Adding and Moving a programme channel Make sure the cursor is in the Prog. column. Red, Green, Yellow, and Blue Bars are displayed at the bottom of the screen. These have the same functions as the Red, Green, Yellow, and Blue keys on the remote control. Change Programme Select...
Page 16
Tuning menu To move a programme to another position Choose the programme position to be moved. Change programme Select Return Option TV/AV E x i t 'STR' Button Stare Programme edit Prog. Chan. Name Lock CH41 CH44 Press the Yellow button on remote control. Delete Move Yellow...
Page 17
Tuning menu To lock a programme position to prevent access Choose the programme position to be moved. Lock off / on Select Return Option TV/AV E x i t 'STR' Button Stare Programme edit Move to the lock column. Prog. Chan.
Tuning menu Auto setup Automatically scans all TV channels and stores them in memory. Auto setup automatically retunes your TV. This feature is useful, if for example, you move house and wish to retune your TV to receive the local stations. Display the Tuning menu screen Setup menu SET UP...
Tuning menu Manual Tuning Manual tuning of the programme position is available either from the On Screen Display menu or from the side panel controls. Turn the TV on and select the broadcast channel. Follow the step on the previos page to disply the Tuning menu screen. (From the On screen Display menu) It is possible on individual programme position.
Tuning menu Fine tuning Under normal reception conditions this function is not required or necessary. However, in areas of poor reception or constant interference, a slight adjustment of the tuning may improve the picture and sound quality. Press to select the Fine tuning. Tuning menu Programme edit Auto setup...
Tuning menu Volume correction Control the gain of the received signal, which can differ between stations. Lets you adjust the volume level of individual station. Use this feature if the volume level varies significantly between stations. Adjusting one station’s volume to bring it into line with the other stations means you can avoid having to adjust the volume each time you change channels.
Tuning menu Colour System Selection (Different region use differing systems) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received. Press to select the Colour System. Tuning menu Programme edit Auto setup Manual tuning Fine tuning Colour system...
Tuning your VCR and satellite receiver Your new TV is supplied with programme position ‘0’ set to receive an RF signal from your VCR, although a Scart connection is preferable if the VCR is so equipped (see page 6 or 32 for suitable inputs to the Scart socket on this TV.) However, if for some reason your VCR is tuned to a different RF channel then you will not receive any picture or sound from your VCR on programme position ‘0’...
Picture menu PICTURE Press to display the picture menu screen. Press to select the menu to adjust. Adjust the desired level by looking at the picture behind the menu. TV/AV Press to exit from the Picture menu. This returns the set to the normal viewing condition. Backlight, Contrast, Brightness, Colour, Sharpness, Tint Picture menu Backlight...
Page 25
Picture menu Reduces colour noise. Comb filter Not displayed during RGB Video input and S-Video input mode. Automatically analyses the incoming picture and Picture menu processes it to give improved contrast and Backlight optimum depth of field. Contrast Brightness Colour Sharpness Colour balance Normal...
Sound menu SOUND Press to display the sound menu screen. Press to select the menu to adjust. Adjust the desired level by listening to the sound. TV/AV Press at any time to go back to watching TV. Some features are only available with the Ambience feature switched off. Press to switch between On and Off.
Page 27
Sound menu Sound menu With the Ambience feature switched Off, sound Mode Volume quality can be improved when watching music Bass or speech by selecting the appropriate mode Treble Music or Speech. Balance Headphone volume Press to select Mode. No service No service Mode Music...
Panasonic Auto, 4:3, Zoom and 16:9. Notes: • If you leave Aspect set to Panasonic Auto, the TV software determines the best ratio for each programme viewed.In order not to disrupt your viewing, no mode information is displayed while this is happening.Simply press the ASPECT button to display mode information in the top left of the screen.
Page 29
Aspect Controls 4:3 will display a 4:3 picture at its standard 4:3 size without any stretching. Black stripes will be visible down the left and right sides of the picture. 4 : 3 4 : 3 Zoom Zoom mode magnifies the central section of the picture. Press the yellow or blue buttons to move the picture vertically (useful when there are sub-titles positioned below the picture).
Advanced Remote Control Operation VCR / DVD Operation The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD (Digital Versatile Disc) equipment. Some VCR and DVD equipment have different functions, so to ensure compatibility please refer to the equipment's instruction book or consult your dealer for details.
Advanced Remote Control Operation TELETEXT · Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is transmitting Teletext. PICTURE · Pressing the Picture button whilst in Teletext operation will display the contrast SOUND function with a cyan bar, press to alter the setting as required.
Page 32
Advanced Remote Control Operation It is not possible to change the programme position when in News flash, Update or Sub Coded Page Access operation. List Store In List mode the four page numbers can be altered (programme positions 1 - 25 only). Red Green Yellow Blue To do this, press one of the four coloured buttons and enter the new page number.
Page 33
Advanced Remote Control Operation Sub Coded Page Access SET UP When Teletext information exceeds more than one page, it may take some time Blue for the automatic changing of the sub pages to reach the sub page you require. It is possible to enter your required sub page and continue watching the normal programme until the correct sub page is found.
Connections How to connect the input terminals Connects VCRs and other peripheral equipment Connection example: AV3 connection Connection example: AV1,2 connection Input/Output from Input/Output from AV2 Scart Socket AV1 Scart Socket Q-Link data S-VIDEO cable AUDIO VIDEO Scart cable Scart cable Connect the S-VIDEO or VIDEO Terminal.
Connections How to connect the AUDIO OUT terminals AUDIO IN 3.5 mm stereo plug to stereo phono lead. Amplifier to speaker system Note: The AUDIO OUT terminal provides a fixed level output only. (The menu settings and remote control volume controls have no effect.) Connecting Headphones / Earphones Connect headphones / earphones as follows.
If there is a problem with your LCD TV please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV).
Maintenance To clean this unit, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped in soap-and-water solution or a Neutral detergent weak detergent solution. • Use eyeglass cleaner to remove stubborn dirt from the LCD. •...
Specifications Scart and S-video socket information AV1 Scart socket AV2 S-Video 4 pin socket Socket Earth Chrominance Luminance CVBS in (video) CVBS out (video) RGB status earth CVBS earth Status RGB Red in Earth Chrominance Luminance Red earth earth earth Green in Green earth Status CVBS...
Page 40
Warranty Service purposes. Model Number TX-15LT2F Serial Number Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic.co.jp/global/ Printed in Japan MBS0202S0 (MS)