Basic Configuration Of Menu Display; Status Display - Sony RCP-750 Operation Manual
Remote control panel
Hide thumbs
Also See for RCP-750:
- Operating instructions manual (149 pages) ,
- Operation manual (64 pages) ,
- Maintenance manual (120 pages)
Table of Contents
Advertisement
Basic Configuration of Menu Display
Status display
When you do not select any of the MODE buttons
(PAINT 1, PAINT 2, PAINT 3, SCENE,
MAINTENANCE, FUNCTION) of the menu
operation block (all unlit), the LCD shows the
following status display:
On the status display, each item is
only displayed. The setting is made
with the Function menu or with the
corresponding knob on the
operation panel.
Initial display (Paint menu)
When you press and light the PAINT 1 (or PAINT 2,
PAINT 3) button of the menu operation block, the
initial display of the Paint menu is obtained.
To clear the adjusted values
The names of the items are
displayed. Press the name
of the item to be adjusted.
The color of the pressed
name area will change, and
the lower half of the panel
will become the adjustment
display (see the next page).
Status
Shutter
M. Gain
Gamma
60
0dB
0.45
White
0
0
0
Black
0
0
0
Current page number / total number of pages
1 / 6
Clear
White
Black
Flare
Gamma
ND
ND
You may adjust these items using the
Function menu.
1
A
Detail
You may adjust these items using the
0
WHITE knobs, BLACK/FLARE knobs, or
DETAIL knob.
The "Detail" and "Black" columns can be
changed to "SD Detail" or "Flare" using
the Maintenance menu.
Press either to flip the pages of the
menu.
13(E)
Hide quick links:
Advertisement
Table of Contents
