Siemens Gigaset SL150 colour Instructions Manual

Hide thumbs Also See for Gigaset SL150 colour:

User manual (117 pages)

Service manual (36 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

page of 109

/ 109
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Summary of Contents for Siemens Gigaset SL150 colour

Page 1 Nadamo se da sa zadovoljstvom koristite svoj Gigaset de la Siemens AG. Las posibles declaraciones de la uređaj. Siemens AG o de la SHC en las instrucciones de uso se deben entender por lo tanto como declaraciones de la Giga- Spoštovani kupec! set Communications GmbH.
Page 2 Devices GmbH & Co. KG (SHC), kroz koju je nastavljeno poslovanje kompanije Gigaset kao dela Siemens AG. Stoga sve izjave od strane Siemens AG ili SHC koje se mogu naći u korisničkim uputstvima treba tumačiti kao izjave kompanije Gigaset Communications GmbH.
Page 3 Siemens Home and Office Communication Devices GmbH & Co. KG Schlavenhorst 66 D-46395 Bocholt Gigaset SL100/150 colour © Siemens Home and Office Communication Devices GmbH & Co. KG 2005 All rights reserved. Subject to availability. Rights of modification reserved. www.siemens.com/gigaset...
Page 4: The Handset At A Glance
The handset at a glance The handset at a glance Reception strength Display (display screen) Talk key Charge status × flat Ú fully Answer a call ◆ charged Initiate dialling ◆ × flashes: battery is Control key almost flat or is charging Opens the menu, direc- tory, voice-activated dial- Current functions and...
Page 5: Table Of Contents
Contents Contents The handset at a glance ..... . 1 Safety precautions ......6 Preparing to use your phone .
Page 6 Contents SMS (Text Messages) ..... . . 35 General ............35 Before you can send and receive text messages .
Page 7 Contents Using several handsets ..... . 68 Internal calls, ending a call ..........68 Changing the name of a handset .
Page 8 Contents Appendix ....... . . 87 Care ............. . . 87 Contact with liquid .
Page 9: Safety Precautions
Safety precautions Safety precautions Only use the power supply unit supplied, as indicated on the underside of the device. Fit only the recommended rechargeable battery (page 90)! Use no other types of batteries or non-rechargeable batteries, as they could damage health and cause personal injury.
Page 10: Preparing To Use Your Phone
Preparing to use your phone Preparing to use your phone The pack contains: a base station Gigaset SL100 colour or , ◆ a Gigaset SL1 colour handset, ◆ one power supply unit with power cord, ◆ one telephone cord, ◆ one belt clip for the handset, ◆...
Page 11: Connecting The Base Station
Preparing to use your phone Connecting the base station 1. Underside of base (charging cradle not shown) (detailed view) 2. Power supply unit 230 V 3. Phone jack with phone cord Fit the small jack on the phone cord into the socket in the base station (it clips into ◆...
Page 12: Preparing To Use The Handset
To open the battery cover, press on the grooved area and slide down. ◆ Use only the rechargeable battery recommended by Siemens on page 90! Never use conventional batteries (non-rechargeable) or other battery types as this may cause significant damage to health and property. For example, the jacket of the battery could be destroyed (hazardous).
Page 13 Preparing to use your phone Placing the handset into the charging unit and charging the battery 1. Plug the charger unit mains adapter into a mains socket. 2. Place the handset in the charger unit with the display up. 3. The handset is already registered with the base station. "INT 1" appears in the dis- play.
Page 14: Attaching The Belt Clip
Preparing to use your phone Attaching the belt clip Push the belt clip onto the back of the handset until the lugs click into the recesses on either side of the handset. Activating/deactivating the handset To activate hold down the end call key a. You will hear a confirmation tone. A deactivated handset activates automatically when placed in the charger.
Page 15: Operating The Telephone, Menu Guidance
Operating the telephone, menu guidance Operating the telephone, menu guidance Keys Control key The control key is the central operating key. It has four arrows and icons. A certain func- tion is activated depending on which side of the key you press (up, down, right or left). In the operating guide, the side you have to press is shown with a black triangle, e.g.: key v for right = Open menu.
Page 16: Correcting Wrong Input
Operating the telephone, menu guidance Display keys The display keys are the horizontal rocker keys just below the display. Their function changes depending on the particular operating situation. The current function is shown in the display directly above the key to which it relates. Example: •...
Page 17: Idle Status
Display in idle status (example) Gigaset SL100 colour Ð Ù Time and date are already set INT 1 20.05.03 09:45 • Gigaset SL150 colour Ð × Ù Time and date are INT 1 already set 20.05.05 09:45 • Reverting to idle status from anywhere in the menu: Press the "end call"...
Page 18: Menu Operation, With "Handsfree Volume Setting" As An Example
Operating the telephone, menu guidance Menu operation, with "Handsfree Volume setting" as an example Press the right side of the control key. The menu opens. ê Navigate with the control key (up, down, right or left) until the ê icon is framed in the display.
Page 19: Date And Time
Date and Time Date and Time Setting the date and time Correct date and time settings are essential if you want to know exactly when calls/mes- sages (SL150 colour) were received. You can choose between 12-hour and 24-hour dis- play (factory setting) for the time (a.m. = 1st half of the day; p.m. = 2nd half of the day). ¢...
Page 20: Setting An Appointment
Date and Time Deactivating the alarm clock ¢ ¢ ç Alarm Clock In the line Room M.: select Off. Now press the display key to confirm the setting. [RRRRRRRRRRRRRRRRRRRRR] Save Long press (back to idle status). Deactivating the wake-up call The alarm rings on the handset with the selected ringer melody.
Page 21: Viewing Missed Appointments, Anniversaries
Date and Time Cancelling an appointment ¢ ¢ ç Set Appoints. Select the appointment (1-5) and confirm. Appoint. 2 Select Off. Now press the display key to confirm the setting. [RRRRRRRRRRRRRRRRRRRRR] Save Switching off or answering an appointment An appointment call sounds with its selected ringer melody (page 78). Appoint. 2 appears in the display, for example.
Page 22: Making Calls
Making calls Making calls Making external calls and ending a call External calls are calls into the public telephone network. Enter the number and press the talk key. The tele- phone number is dialled. You can also press the talk key c first (you hear the dialling tone) and then enter the number.
Page 23: Handsfree
Making calls Screen display with CLIP/CLI With calling line identification, the caller's telephone number is displayed on the hand- set screen. If you have stored an entry for this number in your directory, then that entry will be displayed instead of the number, e. g. "Anna". Å...
Page 24: Using The Directory And Other Lists
Using the directory and other lists Using the directory and other lists Directory and speed dial list The directory and speed dial list can store up to 200 numbers, depending on the length of the entries, the number of entries in the speed dial list and the email directory (page 29).
Page 25 Using the directory and other lists If your phone is connected to a PABX you may have to enter the access code (outside line code) as the first digit of your directory entry (page 85). Storing a telephone number in the speed dial list You can assign one of the digits 0, 2–9 to up to nine entries on your speed dial list.
Page 26: Managing Entries In The Directory And Speed Dial List
Using the directory and other lists You can also enter the next letters: "N" appears in the line directly above the display key (input field). Enter the 2nd letter e. g. "i". You will now see the name coming closest to this combination. The entry field now contains "Ni".
Page 27 Using the directory and other lists Transfer a directory or speed dial list to another handset Precondition: You can only transfer numbers if the receiving and sending handset are registered with the same base station. To do this: 1. Select the menu functions Copy Entry or Copy List. 2.
Page 28 Using the directory and other lists Selecting a number from the directory If you are prompted to enter an external telephone number while you are operating your telephone, you can use your handset's directory to do this. Precondition: The input field for external telephone numbers is displayed. either ...
Page 29: Voice-Activated Dialling
Using the directory and other lists Voice-activated dialling With voice-activated dialling, you dial simply by speaking the name of the person you wish to call. To do this, you first have to store a voice pattern, i.e. the name which you speak will be stored in the handset.
Page 30 Using the directory and other lists Phone announces the caller's name When you receive an external call, you hear the ringer and can also have the telephone announces the caller's name. Precondition: Calling Line Identification is active (page 19) and you have recorded a voice pattern for the incoming number (page 26).
Page 31: Last Number Redial List
Using the directory and other lists Last number redial list The last number redial list contains the ten last dialled numbers. If names have been stored for these numbers in the directory, then the names will be displayed. Manual last number redial Þ...
Page 32: Email Directory
Using the directory and other lists Email directory Use the email directory to store email addresses you need, for example for sending text messages to email addresses. You can save about 200 entries in the email directory, the telephone directory and the speed dial list. Storing a new email address Step 1: Open the email directory: Open the directory.
Page 33: Display Available Memory
Using the directory and other lists Deleting or copying an email address Precondition:You have opened the email directory. Select an entry and open the menu. either ... Deleting an email address: Select the menu item and confirm. Delete Entry or ... Copying an email address: Select the menu item and confirm.
Page 34: Opening Lists With The Message Key
Using the directory and other lists Opening lists with the message key You can use the message key f to open the following lists: 1. SMS list, 2. Answering machine list or mailbox 1, mailbox 2, mailbox 3 (page 54) (SL150 colour only), 3.
Page 35 Number of old, read entries in the list You can use the answering machine list to listen to the messages that are on the answering machine on the Gigaset SL150 colour. The date and time of arrival and caller's number .
Page 36 Using the directory and other lists Caller list settings ¢ ¢ ¢ Calls List: 01+02 Calls Settings The current selection is marked ‰. either ... Only calls which you could not take: Confirm. Missed Calls or ... All calls: Select the menu item and confirm. All Calls Long press (back to idle status).
Page 37 Confirm. The entry is stored. Save Entry Long press (back to idle status). Gigaset SL150 colour: When picking a telephone number from the answering machine list, message playback is interrupted when you press à . Playback will resume when the telephone number has been stored in the directory.
Page 38: Sms (Text Messages)
28.10.05 SMS (Text Messages) SMS (Text Messages) You can send and receive SMS text messages (Short Message Service) with your hand- set. You can write, edit, read, delete or forward text messages from any registered hand- set. When several handsets are in use at any one time, only one handset can access the SMS function.
Page 39: Before You Can Send And Receive Text Messages
28.10.05 SMS (Text Messages) Before you can send and receive text messages Calling Line Identification (page 19) has to be enabled for your phone line. Check ◆ with your telephone network provider to make sure that this service is activated on your phone line.
Page 40 28.10.05 SMS (Text Messages) Entering the number of an SMS centre, changing the send centre You can enter and change the call number of an SMS centre. A previously stored SMS centre number is changed by being overwritten. You should find out about the services and special functions offered by your service pro- vider before you make a new application and/or before you delete pre-configured call numbers.
Page 41: Text Message Sending And The Draft Message List
28.10.05 SMS (Text Messages) Text message sending and the draft message list If a call arrives while you are writing a message, then the message is automatically saved to the draft message list. You can take the call and finish writing the message later (page 41).
Page 42 28.10.05 SMS (Text Messages) Predictive text Ç The EATONI predictive text feature helps you write your message (page 93). The icon indicates whether EATONI is active or not (factory setting: On). You can switch à EATONI off at any time using Predictive Text Please refer to the Character Set Chart (page 91) to see how to enter ◆...
Page 43: Sending A Text Message To An Email Address
28.10.05 SMS (Text Messages) The recipient's number always has to include the area code (prefix), ◆ even if you are in that area. When you send a text message to a specific SMS mailbox, you have to ◆ put the mailbox ID at the end of the phone number (page 48). Sending a text message to an email address If your service provider supports the "SMS to email"...
Page 44 28.10.05 SMS (Text Messages) Sending an SMS as email You have to send the text message to the number of the email service. If the number of the SMS send centre's email service is entered (page 37), then this number is offered. Enter the number of the email service if necessary.
Page 45 28.10.05 SMS (Text Messages) Reading and deleting text messages in the draft message list Precondition: You have opened the draft message list (page 41). Select SMS. either ... Reading SMS: Press the display key. Use s to view the continua- [RRRRRRRRRRRRRRRRRRRRR] Read tion of the text message in the display.
Page 46: Receiving Text Messages And Incoming Message List
28.10.05 SMS (Text Messages) Precondition: You are writing a text message (page 38) and the input field is open. à Press the display key to open the menu. either ... Inserting a template: Select the menu item and confirm. Insert Template Select template and confirm, e.g.
Page 47 28.10.05 SMS (Text Messages) Opening with the message key Precondition: There is at least one new message in the list. Press the message key. Select the mailbox (if necessary) and enter the mail- SMS: 01+05 box PIN (page 47). The incoming message list is opened and the first new message is displayed.
Page 48 28.10.05 SMS (Text Messages) Deleting the entire incoming message list This function deletes all new and old text messages in the incoming message list. Precondition: You have opened the incoming message list (page 43). ¢ Delete Calls List Press the display key to confirm the prompt. [RRRRRRRRRRRRRRRRRRRRR] Long press (back to idle status).
Page 49 28.10.05 SMS (Text Messages) Adding a telephone number from the SMS text to the directory Your telephone "recognises" telephone numbers in a received SMS. It shows the number by highlighting it (maximum 32 digits). If the SMS text contains several numbers, the first one will be highlighted.
Page 50: Using Several Text Message Mailboxes
28.10.05 SMS (Text Messages) Opening the attachment of an SMS The attachment is shown in angle brackets (e.g. <Screensaver>). For installation infor- mation see page 51. Precondition: You have opened the incoming message list and selected an old message (page 43). Select SMS and press the display key.
Page 51 28.10.05 SMS (Text Messages) The general mailbox cannot be assigned a PIN. Only the general mailbox is activated when you purchase the phone. Its mailbox ID is "0". The general mailbox cannot be deactivated. ¢ ¢ ¢ è Settings SMS Mailboxes Activated mailboxes are marked ‰.
Page 52 28.10.05 SMS (Text Messages) The message will not be delivered if the sender has used an invalid ◆ ID or the mailbox has been deactivated. The message will go to your general mailbox if the sender has not ◆ entered the ID. Changing the ID, name and PIN of a mailbox You can change the PIN by overwriting the current entry.
Page 53: Notification By Sms
28.10.05 SMS (Text Messages) Notification by SMS You can have a notification sent to any device with SMS functionality, e.g. your mobile phone, by SMS. You first have to store the destination number in your phone which is at home (factory setting: Off). Precondition: The caller's number was identified when a call was missed (CLI).
Page 54: Using New Ringer Tones For Handsets
You can load other melodies than the selection already in the handset provided they have the format "iMelody". Melodies are available on the Internet at www.siemens.com/ringtones. Which data is available in your country is shown on the Internet pages. Ask your service provider whether it supports the downloading of mel- odies via SMS.
Page 55: Text Messages To A Pabx
28.10.05 SMS (Text Messages) to a PABX Text messages You can only receive a text message when the Calling Line Identification is for- warded to the extension of the PABX (CLIP). The CLIP of the number of the SMS centre is evaluated in the Gigaset (telephone). If your phone is connected to a PABX, you may have to prefix the number of the SMS centre with an access code (this depends on your PABX).
Page 56 28.10.05 SMS (Text Messages) Self-help with error messages Error Message Possible Cause Remedy You cannot send messages. You have not requested the Ask for this service to be CLIP service (Calling Line enabled. Identification Presentation). Message transfer was inter- Re-send the message. rupted (e.g.
Page 57: Using The Answering Machine In The Sl150 Colour Base Station
Using the answering machine in the SL150 colour Base station The Gigaset SL150 colour has an integrated answering machine. It records calls once it has been activated (factory setting). You can operate the answering machine: via the handset (with voice prompts if available), ◆...
Page 58 Using the answering machine in the SL150 colour Base station Example for an announcement: "This is the answering machine of the Smith family. If you want to leave a message for Rosy Smith, presS1 colour, for Paul Smith press 2." The caller will then enter the appropriate number of the mailbox he or she wants to leave a message in.
Page 59 Using the answering machine in the SL150 colour Base station Please remember: Recording ends automatically when the max. recording time of 170 seconds is ◆ exceeded or there was a break in speaking of more than 2 seconds. Ý During recording you can cancel the announcement with the a key or ◆...
Page 60 Using the answering machine in the SL150 colour Base station either ... With Answer and Record message: Confirm (‰ = On). Ans. & Record or ... No Answer and Record message: Select the menu item and confirm (‰ = On). Your Announce Only selected announcement is saved even after the answering machine is deactivated.
Page 61 Using the answering machine in the SL150 colour Base station Playing messages The date and time of arrival of each message is logged (provided this function is set, page 16). If Calling Line Identification is activated, then the caller's number is displayed. New messages that have not yet been played are indicated by a message in the display and by the f key flashing on the handset.
Page 62: Deleting Messages
Using the answering machine in the SL150 colour Base station Marking a message as "new" during playback If you wish to put an "old" message (one which you have already listened to) back to the top of the list, you first have to mark it as "new" during playback. The f key on the handset will now flash.
Page 63: Adding A Telephone Number From The Answering Machine List To The Directory
Using the answering machine in the SL150 colour Base station Adding a telephone number from the answering machine list to the directory ¢ Ans M.: 01+02 If several mailboxes have been activated: Select a mailbox and confirm. Mailbox 2 Select an entry and open the menu. Select the menu item and confirm.
Page 64: Operating The Answering Machine While You Are Away From Home
Using the answering machine in the SL150 colour Base station Operating the answering machine with voice prompts You can control message playback using the voice commands "BACK" und "FORWARD". You can delete individual messages during playback using the voice command "DELETE".
Page 65 Using the answering machine in the SL150 colour Base station Operating the answering machine with the keypad Key the appropriate digit for the required action. Digit Meaning Go to the start of the current message. Go to previous messages (press repeatedly). Stop.
Page 66: Setting The Answering Machine Of The Sl150 Colour Base Station
Setting the answering machine of the SL150 colour Base station Setting the answering machine of the SL150 colour Base station The answering machine has already been preset at the factory. However you can make individual settings using the handset. Ring delay and charge saving function for remote operation You can set when you want the answering machine to activate.
Page 67: Activating/Deactivating Call Screening
Setting the answering machine of the SL150 colour Base station Activating/deactivating call screening While a message is being recorded, you can listen to it via the loudspeaker of any hand- set (factory setting). ¢ ¢ æ Call Screening Confirm (‰ = On). Handset Long press (back to idle status).
Page 68: Using The Network Mailbox
Long press (back to idle status). This setting is now valid for all registered handsets. To find out how to reset fast access on the Gigaset SL150 colour to the answering machine, refer to page 64. Calling the network mailbox PresS1 colour and hold.
Page 69: Registering And De-Registering Handsets
Registering and de-registering handsets Registering and de-registering handsets You can register up to six handsets on your base station. An SL1 colour handset can be registered on up to four base stations. Manual registration: Gigaset SL1 colour to Gigaset SL100 colour You have to initiate handset registration on the handset and on the base station.
Page 70: De-Registering Handsets
Registering and de-registering handsets De-registering handsets You can de-register any registered handset from any registered SL1 colour handset. Open list of handsets. Internal ______ ______1 Call All INT 1 < The handset you are using is marked with <. Anna ¨...
Page 71: Using Several Handsets
Using several handsets Using several handsets Internal calls, ending a call Internal calls are calls with other handsets that are registered with the same base sta- tion. These calls are free. Calling a specific handset or all handsets simultaneously. Open list of handsets. Your own handset is marked with <.
Page 72: Changing A Handset's Internal Number
Using several handsets Changing a handset's internal number A handset is automatically assigned the lowest unassigned number when it is regis- tered. You can change the internal number of all registered handsets (1–6). Open list of handsets Open the menu. Confirm.
Page 73: Accepting/Rejecting Call Waiting During An Internal Call
Using several handsets Accepting/rejecting call waiting during an internal call If you get an external call while conducting an internal call, you will hear the call wait- ing tone (short tone). The caller's number will appear in the display if Calling Line Iden- tification is enabled.
Page 74: Using A Handset As A Room Monitor
Using several handsets Using a handset as a room monitor With this function, a previously stored internal or external number is called when a set noise level in the room is reached (the baby cries). When you answer the call you hear the noise in the baby's room.
Page 75 Using several handsets either ... Enter an internal number as the "call to" number: Press the display key. [RRRRRRRRRRRRRRRRRRRRR] Select the handset and confirm. or ... Enter an external number as the "call to" number: Enter the telephone number. à Press the display key.
Page 76: Setting The Walk And Talk Mode
Using several handsets Changing an internal "call to" number Precondition: You are in the entry field for the room monitor (Step 1, page 71). Scroll to the Call to: line and press the display key. R[RRRRRRRRRRRRRRRRRRRR] Edit Press the display key to confirm the prompt. [RRRRR] Press the display key.
Page 77 Using several handsets The handsets cannot be reached by incoming calls. ◆ Walk and Talk mode severely reduces handset operating times. ◆ Activating/deactivating the Walk and Talk mode ¢ ¢ é Walk and Talk Deactivating the Walk and Talk mode: Press the display key.
Page 78: Handset Settings
Handset settings Handset settings Your handset is preset. You can change the settings to suit your requirements. Changing the Display language Change the automatically assigned name of the handset, before changing the dis- play language, e.g. from "INT1" to "Walid" see page 68. You can view the display texts in different languages.
Page 79: Logo Display
Handset settings ... then Long press (back to idle status). Logo display You can display a logo instead of the 'idle status display'. You have a choice of 3 logos. ¢ ì Confirm. Display Confirm. Screen Picture Screen picture on/off Go to the Picture: line and select a picture.
Page 80: Changing The Ringer
Handset settings Ringer echo You can select an echo effect for the long ringer melodies (4-10). ¢ ê Confirm (‰ = On). Ringer Echo Long press (back to idle status). Changing the ringer A range of options are available: Six volume levels: ◆...
Page 81 Handset settings Scroll to the From: line and enter the start of the period (4 -digit). Scroll to the Until: line and enter the end of the period (4 -digit). Scroll to the next line to set the volume for the ringer. Now press the display key to store the time control.
Page 82: Vibration Alarm
Handset settings Activating/deactivating the ringer All handsets ring when there is an incoming call. You can cancel the ringer on your handset before you answer a call or when the handset is in idle status; the ringer can be cancelled permanently or just for the current call. Cancelling the ringer permanently: Press the star key and hold until the ringer cannot be heard any longer.
Page 83: Sound Manager
Handset settings Activating /deactivating suppression of the first ringer tone The first ring is muted so that you are not disturbed by an incoming text message. You can change this setting so you can hear the first ring too. Open the menu. N O 1 O Press keys.
Page 84: Activating/Deactivating Advisory Tones
Handset settings Playing back the melody, editing the entry ¢ ¢ Audio Settings Sound Manager Select the melody. either ... Playing back the melody: Press the display key. [RRRRRRRRRRRRRRRRRRRRR] Play or ... Changing an entry: à Press the display key. Scroll to the Volume line to change the volume.
Page 85: Restoring The Handset Factory Settings
Handset settings Restoring the handset factory settings You can reset individual settings and changes you have made. This will not affect entries in the directory, the calls list, the email directory or the speed dial list, the handset's reg- istration to the base station and melodies that you have loaded. Press a to cancel the reset.
Page 86: Setting The Base Station
You can change the base station's 4-digit system PIN (factory setting 0000) to a 4-digit PIN which is known only to you. This also allows you to remotely operate the answering machine in the Gigaset SL150 colour (page 61). ¢...
Page 87: Repeater Support
Setting the base station Repeater support With a repeater you can increase the range and reception strength of your base station; the repeater has to be registered. To use the repeater you first have to activate the repeater mode. This will cancel any calls that are in progress. ¢...
Page 88: Connecting The Base Station To A Pabx
Connecting the base station to a PABX Connecting the base station to a PABX The following settings are only needed when your PABX requires them, please refer to the operating instructions for your PABX. You cannot send or receive text messages on PABXs that do not support Calling Line Identification.
Page 89: Setting Pauses
Connecting the base station to a PABX If you have stored an access code, the following will apply: For emergency numbers, SMS service centre numbers and dialling from the calls list ◆ or message list (SL150 colour only) the access code is inserted automatically. For telephone numbers from the directory or network access list, you have to add ◆...
Page 90: Appendix
In many cases, you will then be able to use it again. Questions and Answers If you have any questions about the use of your phone, you can contact us 24/7 at www.siemens.com/gigasetcustomercare. You will find the most frequently asked questions and answers below. What has happened if … Possible cause Possible solution …...
Page 91 Appendix What has happened if … Possible cause Possible solution … I cannot listen to the net- Your phone system is set for Set your phone system to tone work mailbox? pulse dialling. dialling (page 86). … the calls list does not indi- Date/time are not set.
Page 92: Service (Customer Care)
You can get assistance easily when you have technical questions or questions about how to use your device by using our online support service on the Internet at: www.siemens.com/gigasetcustomercare or by referring to the section entitled Questions and answers in this manual (page 87).
Page 93: Specifications
Appendix Specifications Recommended battery Lithium-Ion (LiIon), 700 mAh (Valid when these operating instructions were printed) The device is supplied only with a recommended battery. Handset operating times/charging times Capacity Standby time Calling time Charging time (mAh) (hours) (hours) (hours) min. 290 (12 days) approx.
Page 94: Answering Machine Remote Operation (Sl150 Colour Only)
Appendix Answering machine remote operation (SL150 colour only) The functions of the keys used to operate the answering machine remotely are the same for all telephones, handsets and tone transmitters. The "credit card” shows you how to perform remote operations on an external telephone (e.g. from a pay phone, from a hotel etc.) and the meaning of the keys.
Page 95 Appendix Writing and editing text (without predictive text) You can write and edit text in a number of ways: The cursor is controlled with u v t s. ◆ Characters (to the left of the cursor) are deleted with ◆ Characters are added to the left of the cursor (page 13).
Page 96: Predictive Text
Appendix Predictive text The EATONI predictive text helps you to write: ◆ Names in the directory, ◆ Names in the speed dial list, ◆ Names in the email. ◆ Each key between Q and O is assigned several letters and characters which all appear on a selection line (above the display icons) as soon as you press a key.
Page 97: Pc Interface
Appendix PC Interface You can connect your SL 1 handset to a computer using a Siemens data cable (page 96). Your computer can then communicate with your SL 1 using "Siemens Data Suite" (free download available at http:\\www.siemens.com/gigaset-sds) and access the following...
Page 98: Accessories
Accessories Accessories Gigaset Handsets Turning your Gigaset into a cordless telephone system: Gigaset Handset SL1 colour Big illuminated colour screen with date and time dis- ◆ play Directory for about 200 entries ◆ Full duplex grade handsfree ◆ SMS (precondition: you have CLIP and ◆...
Page 99 Accessories Data Cable DCA-500 To connect the telephone to your computer's RS232 serial interface. Data Cable USB DCA-510 For connecting the phone to the USB port on your PC. Gigaset SL1 colour charger You can use the charger for your Gigaset SL1 colour handset. You can also use the S55 handset's MP Accessories.
Page 100: Menu Tree
Menu Tree Menu Tree Instead of scrolling to locate a menu function, you can select a menu function faster by opening the menu and keying in the digit combination ("shortcut"). Example: v 5 2 4 for "set ringer melody for the alarm clock". Main menu With the telephone in the idle status, press v (open menu): You have activated an SMS mailbox (without PIN)
Page 101 Menu Tree ì Display 7-1-1 Screen Picture 7-1-2 Colour Scheme 7-1-2-1 Colour Scheme 1 7-1-2-... [to] 7-1-2-4 Colour Scheme 4 7-1-3 Contrast 7-1-4 Night Mode Auto Answer Language Register H/Set (Liste) Select Base 7-5-1 Base 1 7-5-… [bis] 7-5-4 Base 4 7-5-5 Best Base Reset Handset...
Page 102: Directory Key And Speed Dial List Key
Menu Tree æ Set Key 1 9-1-1 Network Mailb. 9-1-2 Answer Machine SL150 colour only: 9-2 Ans Machine Call Screening 9-3-1 Handset Record Memo Announcements 9-5-1 Rec Announce 9-5-2 Play Announce 9-5-3 Del Announce 9-5-4 Rec Anc Only 9-5-5 Play Anc Only 9-5-6 Del Anc Only 9-5-7...
Page 103: Index
Index Index Answering machine ....announcement mode ... Accept memos ..... . call .
Page 104 Index Battery CLIP ......charging ....Confirmation tone .
Page 105 Index Directory ..... . base station ....opening the .
Page 106 Index opening the ....Mailboxes, see SMS Incoming message Making calls list (SMS) . . . answering a call ... . Internal external .
Page 107 Index Notes (spoken) see Memo ..sending and receiving SMS ..Notification, see SMS Predictive text ... . Notify number see SMS activate/deactivate .
Page 108 28.10.05 Index setting the sensitivity ..Skip back (ans. m.) ....using in Walk and Talk mode ..Skip forward (answering machine) .
Page 109 Index Speed dial list ....ringer volume ....changing a single entry .

This manual is also suitable for:

Gigaset sl100 colour

Siemens Gigaset SL150 colour Instructions Manual

The Handset at a Glance

Safety Precautions

Preparing to Use Your Phone

Operating the Telephone, Menu Guidance

Date and Time

Making Calls

Using the Directory and Other Lists

SMS (Text Messages)

Using the Answering Machine in the SL150 Colour Base Station

Setting the Answering Machine of the SL150 Colour Base Station

Using the Network Mailbox

Registering and De-Registering Handsets

Using Several Handsets

Handset Settings

Setting the Base Station

Connecting the Base Station to a PABX

Appendix

Accessories

Menu Tree

Index

Quick Links

Related Manuals for Siemens Gigaset SL150 colour

Summary of Contents for Siemens Gigaset SL150 colour

This manual is also suitable for:

Table of Contents