Hibernation Mode - Toshiba Portege M100 User Manual
Toshiba portege m100 computer
Hide thumbs
Also See for Portege M100:
- Specifications (8 pages) ,
- Maintenance manual (386 pages) ,
- User manual (272 pages)
Table of Contents
Advertisement
Hibernation mode
The hibernation feature saves the contents of memory to the hard disk
when the computer is turned off. The next time the computer is turned on,
the previous state is restored. The hibernation feature does not save the
status of peripheral devices.
Save your data. While entering hibernation mode, the computer saves the
contents of memory to the HDD. However, for safety sake, it is best to
save your data manually. Data will be lost if you remove the battery or
disconnect the AC adaptor before the save is completed. Wait for the
Disk indicator to go out.
Do not install or remove a memory module while the computer is in
hibernation mode. Data will be lost.
Benefits of hibernation
The hibernation feature provides the following benefits:
■
Saves data to the hard disk when the computer automatically shuts
down because of a low battery.
For the computer to shut down in hibernation mode, the hibernation
feature must be enabled in two places in TOSHIBA Power Saver: the
Hibernate window and the Battery Alarm item of the Alarm window.
Otherwise, the computer will shut down in Standby mode. If battery
power becomes depleted, data saved in Standby will be lost.
■
You can return to your previous working environment immediately
when you turn on the computer.
■
Saves power by shutting down the system when the computer
receives no input or hardware access for the duration set by the
System hibernate feature.
■
You can use the panel power off feature.
Setting up Hibernation
Before starting hibernation, make the appropriate settings according to
the steps below.
1. Open the Control Panel.
2. Open Performance and Maintenance.
3. Open TOSHIBA Power Saver.
Single-click each item to open it.
Portégé M100
Getting Started
3-10
Advertisement
Table of Contents
