Advertisement
Quick Links
Download this manual
See also:
User Manual
6
Advanced Operations
1
Configuring the VoIP Service
Users can make calls using the CPE through the Voice over IP (VoIP) service. Perform the
following steps to configure the VoIP service:
1.
Log in to the Web page of the CPE.
2.
Choose Basic > VoIP, and then click the SIP User tab.
3.
Enter the new ID in the SIP ID text box.
4.
Enter the user name and password provided by the service provider correctly.
5.
Enter the port number in the SIP Local Port text box.
6.
Select the correct caller number display type.
7.
Select whether to enable message waiting indication. When you enable the function,
you need to enter the Uniform Resource Identifier(URI) in the Message Waiting In-
dication Service Subscribe URI text box, and then save the settings.
8.
Click the SIP Server tab.
9.
Select the server type. Two options are available: primary server and secondary serv-
er.
10.
Enter the address and port number of the SIP proxy server and SIP registrar server
respectively.
11.
Enter the domain name of the SIP service and save the settings.
After the configuration, you need to restart the CPE to validate the VoIP service. After the
restart, you can make calls by connecting your phone to the CPE.
Setting the User Account
2
After logging in to the Web page of the CPE, you can change the user account. Do not
forget the new account. Perform the following steps to set the user account:
1.
Log in to the Web page of the CPE.
2.
Choose Maintain > Account, and click the Account tab.
3.
Enter the old password.
4.
Enter the new username, the new password and confirm the new password.
5.
Click Apply.
If you forget your password, please restore the default settings to resume the initial password. You
can also contact the local service provider for help.
7
Specifications
3
Viewing the Status Information about the CPE
The status information about the CPE includes the device information, Wide Area Network
(WAN) information, LAN information, VoIP information, and WiMAX information.
•
The device information includes the product class, device ID, software version, hard-
ware version, WAN Medium Access Control (MAC) address, LAN MAC address, and
WLAN MAC address.
•
The WAN information includes the connection status, IP address, subnet mask, default
gateway, and Domain Name Server (DNS).
•
The LAN information includes the LAN host IP address, status about each LAN port,
and Wireless Local Area Network (WLAN) status.
•
The VoIP information includes the SIP ID and the register status.
•
The WiMAX information includes the network connection status, the signal strength,
and other information.
Perform the following steps to view the status information:
1.
Logging in to the Web page of the CPE.
2.
Expand the Status navigation tree and select the tab to view the corresponding sta-
tus information.
Specifications
4
Item
Sub-item
Specifications
WiMAX
Standard
IEEE 802.16e-2005
parameters
Frequency
3.4–3.6 GHz
LAN
Four Fast Ethernet (FE) ports
Port
TEL
Two Plain Old Telephone Service (POTS) ports
Frequency
2.4–2.4835 GHz
Wi-Fi
parameters
Working mode
IEEE 802.11b/g, IEEE 802.11b, and IEEE 802.11g
Power adapter input
100–240 V AC
Power consumption
12 W
，2 A
Power supply to device
12 V DC，2 A
2 A
Working environment
Other
0℃ to 40℃ (32 ℉ to 104 ℉ )
temperature
parameters
Working environment
5% to 95% (non-condensing)
humidity
188 mm ×158 mm × 34 mm (without the base)
Dimensions (L×W×H)
Weight
< 400 g
8
Troubleshooting
The POWER indicator is off.
Ensure that the device is powered on.
Ensure that the power adapter is compatible with the device.
You cannot make calls.
Ensure that the telephone is working normally and the telephone line is
connected properly.
Ensure that the VoIP service is configured correctly. For details, see Con-
figuring the VoIP Service on page 6.
If the problem persists, contact the local service provider.
You cannot log in to the Web page.
Ensure that the device is powered on.
Ensure that the network cable connecting the device and the PC is in good
condition.
Ensure that the parameters are set correctly. For details, see Logging in
to the Web page on page 5.
If the problem persists, contact the local service provider.
The WiMAX network cannot be searched.
Ensure that the antennas are correctly connected.
Ensure that the device is powered on.
Ensure that the device is kept in an open space where it is away from ob-
stacles like concrete or wooden walls.
Ensure that the device is kept away from any household appliance that
emits strong electric field or magnetic field, such as a microwave oven, a
refrigerator, or a satellite dish antenna.
If the problem persists, contact the local service provider.
The device or power adapter gets heated.
After being used for a long time, the device may heat up. Power off the
device when it is not in use.
Place the device in a well-ventilated place. Do not expose the device to
direct sunlight.
9
Legal Notice
Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without
prior written consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei Technologies Co.,
Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decom-
pile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software,
unless such restrictions are prohibited by applicable laws or such actions are approved by respective
copyright holders under licenses.
Trademarks and Permissions
, HUAWEI, and
are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respec-
tive owners.
Notice
Some features of the product and its accessories described herein rely on the software installed, ca-
pacities and settings of local network, and may not be activated or may be limited by local network
operators or network service providers, thus the descriptions herein may not exactly match the prod-
uct or its accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications
contained in this manual without prior notice or obligation.
No Warranty
THE CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE
LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECH-
NOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAM-
AGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and will obtain all
necessary governmental permits and licenses in order to export, re-export or import the product men-
tioned in this manual including the software and technical data therein.
Issue: 02 (2009-10-10)
Part Number: 00405272
EchoLife BM635 WiMAX CPE
Quick Start
Advertisement
Related Manuals for Huawei EchoLife BM635
Summary of Contents for Huawei EchoLife BM635
-
Page 1: Quick Start
If the problem persists, contact the local service provider. uct or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications restart, you can make calls by connecting your phone to the CPE. - Page 2 The indicators are used to indicate the status of devices connected to the • Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant • Obstacles such as concrete or wooden walls may affect the transmission of WiMAX matically, and can be used after the network is connected successfully.