Selecting the Sound Mode
The DUAL I-II button displays/controls the processing and output of the audio signal. When power
is switched on, the mode is automatically preset to either "DUAL-I" or "Stereo", depending on the
current transmission.
Easy Setting
1
Press the TOOLS button on the remote control.
Press the ▲ or ▼ button to select Dual I-II.
Press the ◄ or ► button to select the required option.
Type of
broadcast
Regular
broadcast
(Standard
audio)
Regular
NICAM
+ NICAM
Stereo
Mono
NICAM-
Stereo
NICAM
Dual-I/II
Regular
broadcast
(Standard
audio)
A
Zweis-
Stereo
prachig oder
Dual-I/II
Stereo
➢
If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono.
If the stereo signal is weak and automatic switching occurs, switch to Mono.
This function is only available in Analog TV mode.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to watch a TV program without
disturbing other people in the room.
➢
When you insert the head set jack into the corresponding
port, you can operate only
DTV : Audio Language, Audio Format, TV Speaker,
Sound Reset
ATV : TV Speaker, Sound Reset
➢
Prolonged use of headphones at a high volume may
damage your hearing.
➢
You will not hear sound from the speakers when you
connect headphones to the TV.
➢
The headphone volume and TV volume are adjusted
separately.
(depending on the model)
On-screen indication
Mono (Normal use)
↔
NICAM
NICAM
↔
Stereo
NICAM
NICAM
→
Dual-1
Dual-
Mono (Normal use)
↔
Dual I
↔
Stereo
English - 5
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
Dual I II
Mono
(Normal)
Mono
(Normal)
Mono
→
(Normal)
Dual II
Mono
(Forced
mono)
TOOLS
Device List
:
Standard
◄
Standard
:
Off
:
Off
:
Off
:
Mono
Move
Adjust
TV Side Panel
►
Exit