hit counter script
Lenovo IdeaCentre B540 Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. IdeaCentre B540
  6. Hardware maintenance manual

Lenovo IdeaCentre B540 Hardware Maintenance Manual

Hide thumbs Also See for IdeaCentre B540:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Manual
IdeaCentre B540–B540P
Hardware Maintenance Manual

Advertisement

Table of Contents
loading

Related Manuals for Lenovo IdeaCentre B540

Summary of Contents for Lenovo IdeaCentre B540

  • Page 1 IdeaCentre B540–B540P Hardware Maintenance Manual...
  • Page 3 IdeaCentre B540–B540P Hardware Maintenance Manual...

  • Page 5: Table Of Contents

    Selecting a startup device ..Replacing the speaker system ..Exiting the Lenovo BIOS Setup Utility program . . Replacing the touch control board ..
  • Page 6 IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 7: Chapter 1. About This Manual

    Chapter 1. About this manual This manual contains service and reference information for IdeaCentre B540 & B540P computers listed on the cover. It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing a Lenovo product, be sure to read the Safety Information.
  • Page 8 IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 9: Chapter 2. Safety Information

    Electrical current from power, telephone, and communication cables can be hazardous. To avoid personal injury or equipment damage, disconnect the attached power cords, telecommunication systems, networks, and modems before you open the computer covers, unless instructed otherwise in the installation and configuration procedures. © Copyright Lenovo 2012...
  • Page 10 – Blowers and fans – Motor generators and similar units. (This practice ensures correct grounding of the units.) • If an electrical accident occurs: – Use caution; do not become a victim yourself. – Switch off power. IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 11: Safety Inspection Guide

    – Send another person to get medical aid. Safety inspection guide The intent of this inspection guide is to assist you in identifying potentially unsafe conditions on these products. Each machine, as it was designed and built, had required safety items installed to protect users and service personnel from injury.

  • Page 12: Grounding Requirements

    • Connect and disconnect cables as described in the following table when installing, moving, or opening covers on this product or attached devices. IdeaCentre B540–B540PHardware Maintenance Manual...
  • Page 13 To Connect To Disconnect 1. Turn everything OFF. 1. Turn everything OFF. 2. First, attach all cables to devices. 2. First, remove power cords from outlet. 3. Attach signal cables to connectors. 3. Remove signal cables from connectors. 4. Attach power cords to outlet. 4.
  • Page 14 To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. CAUTION: Do not place any object weighing more than 82 kg (180 lbs.) on top of rack-mounted devices. IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 15: Chapter 3. General Information

    This chapter provides general information that applies to all machine types supported by this publication. Specifications This section lists the physical specifications for your computer. This section lists the physical specifications for your computer. Type IdeaCentre B540 & B540P This section lists the physical specifications. Environment Air temperature: Operating: 10°...
  • Page 16 IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 17: Chapter 4. General Checkout

    • If the computer displays a POST error, go to “POST error codes”. • If the computer hangs and no error is displayed, continue at step 7. 7. If the test stops and you cannot continue, replace the last device tested. © Copyright Lenovo 2012...
  • Page 18 IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 19: Chapter 5. Using The Setup Utility

    1. If your computer is already on when you start this procedure, shut down the operating system and turn off the computer. 2. Press and hold the F1 key then turn on the computer. When the Lenovo BIOS Setup Utility program is displayed, release the F1 key.
  • Page 20 5. Select Save changes and Exit from the menu. Power-On Password When a Power-On Password is set, you cannot start the Lenovo BIOS Setup Utility program until a valid password is typed from the keyboard. Setting, changing, or deleting a Power-On Password Note: A password can be any combination of letters and numbers up to 16 character (a-z, and 0-9).

  • Page 21: Enabling Or Disabling A Device

    To set a Power-On Password, do the following: 1. Start the Lenovo BIOS Setup Utility program (See ”Starting the Lenovo BIOS Setup Utility program” on page 13.) 2. From the Security menu, select Set Power-On Password and press the Enter key.

  • Page 22: Selecting A Startup Device

    Selecting or changing the startup device sequence To view or permanently change the configured startup device sequence, do the following: 1. Start the Lenovo BIOS Setup Utility program (see “Starting the Lenovo BIOS Setup Utility program” on page 13). 2. From the Lenovo BIOS Setup Utility program main menu, select the Startup option.

  • Page 23: Exiting The Lenovo Bios Setup Utility Program

    Exiting the Lenovo BIOS Setup Utility program After you finish viewing or changing settings, press the Esc key to return to the Lenovo BIOS Setup Utility program main menu. You might have to press the Esc key several times. Do one of the following: •...
  • Page 24 IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 25: Chapter 6. Symptom-To-Fru Index

    Check that the following are properly installed: Reseat connectors • Power Cord • On/Off Switch connector • System Board Power Supply connectors • Microprocessor(s) connection Check the power cord. Power Cord Check the power-on switch. Power-on Switch © Copyright Lenovo 2012...

  • Page 26: Post Error Codes

    3. Power-on the computer to re-test the system. 4. Repeat steps 1 through 3 until you find the failing device or component. If all devices and components have been removed and the problem continues, replace the system board. IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 27: Chapter 7. Locating Connectors, Controls And Components

    5. Bluetooth status indicator 12. Novo vision button 6. Wi-Fi status indicator 13. PC mode / HDMI-in / AV-in switch 7. TV indicator 14. Monitor On/Off Attention: The effective range of the Built-in IR Emitter is 10 feet (3m). © Copyright Lenovo 2012...
  • Page 28 The following illustration shows the location of connectors, controls and components on the left and right side of the computer. 5. Microphone port 1. Optical drive 2. TV buttons (selected models only) 6. USB connector 7. Memory card reader 3. USB connector 4. Headphone port 8. Power button IdeaCentre B540–B540PHardware Maintenance Manual...
  • Page 29 Rear view The following illustration shows the location of connectors and components on the rear of the computer. 1. Ethernet port 5. AV-IN connectors (selected models only) 2. USB connectors 6. TV tuner ports (selected models only) 3. HDMI-OUT connector 7.
  • Page 30 21. System fans 9. Glass 22. Camera 10. Rear I/O module 23. Hardware TV tuner board 11. Power supply 24. Hardware TV switch board 12. Motherboard 25. Touch module 13. Hard disk drive 26. Bluetooth module IdeaCentre B540–B540PHardware Maintenance Manual...
  • Page 31 Identifying parts on the motherboard The motherboard (sometimes called the planar or system board) is the main circuit board in your computer. It provides basic computing functions and supports a variety of devices that are factory-installed or that you can install later. The following illustration shows the location of connectors and components on the front of the motherboard.
  • Page 32 The following illustration shows the locations of parts on the digital hardware TV board. (DVB-T type) 1. LVDS Connector 5. Tuner Board Connector 2. Converter Connector 6. Fan Connector 3. TV Function Connector 7. Debug Port 4. Mother Board Connector IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 33: Chapter 8. Replacing Hardware

    Attention: Do not remove the computer cover or attempt any repair before reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer. To obtain copies of the Safety and Warranty Guide, go to the Support Web site at: http://consumersupport.lenovo.com. Note: Use only parts provided by Lenovo.

  • Page 34: Replacing The Keyboard And Mouse

    Remove any media (diskettes, CDs, DVDs, or memory cards) from the drives, shut down your operating system, and turn off all attached devices and the computer. Step 2. Locate the connector for the power cord. Refer to “Rear view”. IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 35: Removing The Computer Cover

    Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 36: Removing The Computer Stand

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: For this procedure, it helps to place the computer face-down on a soft flat surface. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage.

  • Page 37: Replacing A Memory Module

    Step 1. Remove any media (disks, CDs, DVDs or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Step 2. Unplug all power cords from electrical outlets. Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer.

  • Page 38: Replacing The Hard Disk Drive

    Attention: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 39: Replacing The Optical Drive

    Step 5. Push then slide the hard disk drive and bracket upward and out of the chassis as shown. Step 6. Push the pins and release the hard disk drive from the bracket. Step 7. Install the new hard disk drive as follows: Line up the new hard disk drive with the bracket and secure it with the pins.
  • Page 40 Step 7. Remove the 2 screws that secure the optical drive to the metal bracket. Step 8. Use a small flat head screwdriver to press and push out the pins that secure the cover to the disk. IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 41: Removing The Middle Cover

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.
  • Page 42 Push down the middle cover to secure it with the pins. Secure the middle cover to the chassis with 5 screws. Reconnect the TV cable to the same connector. Step 12. Reattach the optical drive, computer stand and the rear cover. IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 43: Replacing The Converter Board

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 44: Removing The Emi Cover

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 45: Replacing The Camera

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 46: Replacing The Bluetooth Module

    Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 47: Replacing The Battery

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 48: Replacing The System Fan

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 49: Removing The Power Supply

    Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 50: Replacing The Heat-Sink

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.
  • Page 51 Step 2. Unplug all power cords from electrical outlets. Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to “Left and right view” and “Rear view”...

  • Page 52: Replacing The Cpu

    Remove the middle cover. Refer to “Removing the middle cover”. Step 8. Remove the EMI cover. Refer to “Removing the EMI cover”. Step 9. Remove the system fans. Refer to “Replacing the system fans”. Step 10. Remove the heat-sink. Refer to “Replacing the heat-sink”. IdeaCentre B540–B540PHardware Maintenance Manual...
  • Page 53 Step 11. Lift the small handle and open the retainer. Attention: Do not touch the gold contacts on the bottom of the microprocessor. When handing the microprocessor, touch only the sides. Step 12. Lift the microprocessor straight up and out of the socket. Attention: Do not touch the gold contacts on the bottom of the microprocessor.

  • Page 54: Replacing The Rear I/O Module

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 55: Replacing The Wi-Fi Card

    Step 10. Lift up the rear I/O module. Step 11. Disconnect the TV antenna cable from the rear I/O module by removing the 2 screws. Step 12. Remove the 2 screws that secure the rear I/O module to the metal bracket. Step 13.

  • Page 56: Replacing The Tv Tuner Card

    Refer to “Left and right view” and “Rear view” for help with locating the various connectors. Step 4. Remove the rear cover. Refer to “Removing the rear cover”. Step 5. Remove the computer stand. Refer to “Removing the computer stand”. IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 57: Replacing The Speaker System

    Step 6. Remove the optical drive. Refer to “Replacing the optical drive”. Step 7. Remove the middle cover. Refer to “Removing the middle cover”. Step 8. Remove the EMI cover. Refer to “Removing the EMI cover”. Step 9. Remove the screw that secures the TV-Tuner card to the motherboard. Step 10.

  • Page 58: Replacing The Touch Control Board

    Remove the EMI cover. Refer to “Removing the EMI cover”. Step 9. Disconnect the touch cables from the touch control board. Step 10. Remove the 2 screws that secure the touch control board to the chassis. IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 59: Replacing The Scalar Board

    Step 11. Lift up the touch control board to remove it. Step 12. To install the new touch control board: Line up the holes on the new touch control board with the mounting holes on the middle frame and secure it with the 2 screws. Connect all the cables to the new touch control board.

  • Page 60: Replacing The Motherboard

    Step 14. Remove the rear I/O module. Refer to “Replacing the rear I/O module”. Step 15. Remove the TV scalar board. Refer to “Replacing the TV scalar board”. Step 16. Remove the Wi-Fi card. Refer to “Replacing the Wi-Fi card”. IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 61: Replacing The Led Panel

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.
  • Page 62 Step 21. Remove the 9 screws that secure the chassis to the front bezel and lift it up. Step 22. Disconnect the touch cable from touch control board. Step 23. Disconnect the converter cable from LED panel. IdeaCentre B540–B540PHardware Maintenance Manual...
  • Page 63 Step 24. Remove the Wi-Fi antenna from the front bezel. Step 25. Detach the power board cable, front function board cable, front indicator board cable and LED cable from the chassis. Step 26. Push the pins out to release the chassis and lift the chassis up and set it aside. Step 27.

  • Page 64: Replacing The Power Switch Board

    Step 24. Remove the Wi-Fi antenna from the front bezel. Step 25. Remove the LED panel. Refer to “Replacing the LED panel”. Step 26. Push the pins to release the power switch board and pull it out. IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 65: Fru Lists

    Step 27. Disconnect the cable from the power switch board. Step 28. To install the new the power switch board: Connect the power switch cable to the power switch board. Insert the power switch board, snap it in position and secure it with the pins. Line up the chassis with the front bezel and reconnect the power board, front function board, front indicator board and LED cables to the chassis.

  • Page 66: I I5-3450S 1100411 N

    77 E1 CPU 1100577 I I5-3350P 3.1/1600/6/1155 69 E1 CPU I i5-3470 1100412 3.2G/1600/6/1155/77 CPU I I5-3450 3.1/1600/6/1155 1100338 77 E1 CPU I I5-3330 3.0/1600/6/1155 1100393 77 E1 CPU I i5-3550S 1100417 3G/1600/6/1155/65 CPU I i5-3470S 1100413 2.9G/1600/6/1155/65 IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 67: Q0 Cpu

    I i5-3450S 1100411 2.8G/1600/6/1155/65 I I5-3330S 2.7/1600/6/1155 1100394 65 E1 CPU I Ci5-2400S 1007198 2.5/1333/6/1155 65 D2 I I5-2320 3.0/1333/6/1155 1100103 95 D2 CPU 1100454 I I3-3240 3.4/1600/3/1155 55 L1 CPU 1100456 I I3-3220 3.3/1600/3/1155 55 L1 CPU 1100102 I I3-2130 3.4/1333/3/1155 65 Q0 CPU 1007388 I SNB Ci3 2120...

  • Page 68: Hmt325S6Cfr8C-Pb 1100227

    ST2000DM001 2TB HDD-LH MZMPA064HMDR-000L1 16005084 Samsung PM830 16200109 64G mSATA SSDMZMPC064HBDR-000L1 SN-208AB 25201108 AD-7740H 25201106 DS-8A8SH 25201487 PLDS DS-6E2SH 25200328 BDCombo-LH（BE） HLDS CT30N BD 25200327 Combo-LH（BE） 25201493 HLDS CT40N Optiarc BC-5550H Slim 25204159 Tray BD Combo ODD IdeaCentre B540–B540PHardware Maintenance Manual...
  • Page 69 TSST TS-LB23D 25200329 BDCombo-LH（BE） BT20N 25201634 BD-5750H 25201494 N13P-GT (GeForce GT 1100346 650M ) 36200219 ACBEL APB001-EL0G ES5.0 250W PSU(R) 36200220 FSP FSP250-30SI ES5.0 250W PSU® 36200224 DELTA DPS-250AB-84A ES5.0 250W PSU® 36002045 Acbel APA006-EL0G ES5.0 200w PSU® Huntkey HKF2002-32 36002046 ES5.0 200W PSU®...
  • Page 70 90000255 ATSC(USA) B540 IO Board W/ AV_IN 90000262 W/USB3.0 B540 IO Board W/O AV_IN 90000263 W/O HDMI_IN B540 IO Board W/O AV_IN 90000264 W/USB3.0 B540 IO Board W/ AV_IN 90000265 W/ HDMI_IN B540 B-Cas Board 90000267 IdeaCentre B540–B540PHardware Maintenance Manual...
  • Page 71 B540 Function Status 90000269 Display Board B540 LED Touch Function 90000268 Board B540 Power Board 90000266 Converter 90000256 B540 Converter for LG B540 Converter for 90000257 Sumsang B540 Converter for CMI 90000258 90000259 B540 Converter for LG 3D Speaker 90200887 B540 3W Speaker LCD Module 90400021...
  • Page 72 90200909 B540 ODD Supporting Bracket B540 FAN Bracket 90200912 B540 AC bracket 90200914 B540 ODD housing 90200915 B540 MainFrame 90200924 Bracket(inside) B540 Rear cover(right) 90200933 B540 Rear cover(left) 90200934 B540 HWTV Function 7 Key 90200940 Board IdeaCentre B540–B540PHardware Maintenance Manual...

  • Page 73: Chapter 9. General Information

    • Wake Up on Alarm: You can specify a date and time at which the computer will be turned on automatically. This can be either a single event , a daily event or a weekly event. • Wake Up on LAN: This feature allows LAN adapter card to wake the System. © Copyright Lenovo 2012...

This manual is also suitable for:

Ideacentre b540p

Table of Contents