hit counter script

Ce Marking; National Restrictions - Cisco Linksys WAG200G User Manual

Linksys wireless-g adsl home gateway
Table of Contents

Advertisement

AppendixD
The following standards were applied during the
assessment of the product against the requirements of
the Directive 1999/5/EC:
Radio: EN 300 328 and/or EN 301 893 as applicable
EMC: EN 301 489-1, EN 301 489-17
Safety: EN 60950 and either EN 50385 or EN 50371
Dynamic Frequency Selection (DFS) and Transmit Power
Control (TPC) are required for operation in the 5 GHz
band.
DFS: The equipment meets the DFS requirements as
defined in ETSI EN 301 893. This feature is required by
the regulations to avoid interference with Radio Location
Services (radars).
TPC: For operation in the 5 GHz band, the maximum power
level is 3 dB or more below the applicable limit. As such,
TPC is not required.

CE Marking

For the Linksys Wireless-N, -G, -B, and/or -A products,
the following CE mark, notified body number (where
applicable), and class 2 identifier are added to the
equipment.
or
or
or
Check the CE label on the product to find out which
notified body was involved during the assessment.
Wreless-G ADSL Home Gateway
Regulatory Information

National Restrictions

This product may be used in all EU countries (and other
countries following the EU directive 1999/5/EC) without
any limitation except for the countries mentioned below:
Ce produit peut être utilisé dans tous les pays de l'UE (et dans 
tous les pays ayant transposés la directive 1999/5/CE) sans 
aucune  limitation,  excepté  pour  les  pays  mentionnés  ci-
dessous:
Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti 
gli altri paesi che seguono le direttive EU 1999/5/EC) senza 
nessuna  limitazione,  eccetto  per  i  paesii  menzionati  di 
seguito:
Das Produkt kann in allen EU Staaten ohne Einschränkungen 
eingesetzt  werden  (sowie  in  anderen  Staaten  die  der  EU 
Direktive  1999/5/CE  folgen)  mit  Außnahme  der  folgenden 
aufgeführten Staaten:
In the majority of the EU and other European countries,
the 2,4- and 5-GHz bands have been made available
for the use of wireless local area networks (LANs). The
table labeled "Overview of Regulatory Requirements for
Wireless LANs" provides an overview of the regulatory
requirements applicable for the 2,4- and 5-GHz bands.
Later in this document you will find an overview of
countries in which additional restrictions or requirements
or both are applicable.
The requirements for any country may evolve. Linksys
recommends that you check with the local authorities for
the latest status of their national regulations for both the
2,4- and 5-GHz wireless LANs.
Overvew of Regulatory Requrements for Wreless LANs
Frequency
Max Power Level
Band (MHz)
(EIRP) (mW)
2400-2483.5
100
5150-5350
200
5470-5725
1000
Dynamic Frequency Selection and Transmit Power Control are
required in the frequency ranges of 5250-5350 MHz and 5470-5725
MHz.
The following countries have restrictions and/or
requirements in addition to those given in the table
labeled "Overview of Regulatory Requirements for
Wireless LANs":
Denmark
In Denmark, the band 5150 - 5350 MHz is also allowed for
outdoor usage.
I  Danmark må  frekvensbåndet  5150 -  5350 også anvendes 
udendørs.
Indoor
Indoor &
ONLY
Outdoor
X
X
X
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents