Table of Contents
Advertisement
4 . Management with Web browser software
4.1 Configuring and controlling the projector via a web browser (Continued)
4 .1 .5 Mail Settings
Displays and configures e-mail addressing settings.
Item
Send mail
SMTP Server IP Address
Sender E-mail address
Recipient E-mail address
Click [Apply] button to save the settings.
NOTE
• You can confirm whether the mail settings work correctly using [Send
Test Mail] button. Please enable Send mail setting before clicking [Send Test
Mail].
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
7
Click [Enable] check box to use the e-mail function.
Configure the conditions for sending e-mail under the Alert
Settings.
Configures the address of the mail server in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings. The maximum length of host or domain name is up
to 55 characters.
Configures the sender e-mail address.
The length of the sender e-mail address can be up to 255
alphanumeric characters.
Configures the e-mail address of up to five recipients. You
can also specify [TO] or [CC] for each address. The length of
the recipient e-mail address can be up to 255 alphanumeric
characters.
Description
Advertisement
Table of Contents
