hit counter script
Dell Latitude 5420 Owner's Manual

Dell Latitude 5420 Owner's Manual

Hide thumbs Also See for Latitude 5420:
Table of Contents

Advertisement

Dell Latitude 5420/E5420/E5420m Owner's Manual
Regulatory Model: P15F
Regulatory Type: P15F001

Advertisement

Table of Contents
loading

Summary of Contents for Dell Latitude 5420

  • Page 1 Dell Latitude 5420/E5420/E5420m Owner's Manual Regulatory Model: P15F Regulatory Type: P15F001...
  • Page 2: Notes, Cautions, And Warnings

    Information in this publication is subject to change without notice. © 2012 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell...
  • Page 3: Table Of Contents

    Contents Notes, Cautions, and Warnings....................2 1 Working on Your Computer.......................7 ........................7 Before Working Inside Your Computer ..............................8 Recommended Tools ............................8 Turning Off Your Computer ........................9 After Working Inside Your Computer 2 Battery............................11 .............................11 Removing the Battery ..............................11 Installing the Battery 3 PC Card............................13 ............................13 Removing the PC Card...
  • Page 4 ............................30 Installing the Keyboard 10 Optical Drive..........................31 ............................31 Removing the Optical Drive .............................32 Installing the Optical Drive 11 Hard Drive..........................33 ............................33 Removing the Hard Drive ............................34 Installing the Hard Drive 12 Wireless Local Area Network (WLAN) Card..............35 ...................35 Removing the Wireless Local Area Network (WLAN) Card ...................36 Installing The Wireless Local Area Network (WLAN) Card 13 Wireless Wide Area Network (WWAN) Card..............37...
  • Page 5 ..................61 Removing the ExpressCard/Smart Card/PCMCIA Module ..................64 Installing the ExpressCard/Smart Card/PCMCIA Module 21 Bluetooth Card.........................67 ..........................67 Removing the Bluetooth Card ..........................71 Installing the Bluetooth Card 22 Display Assembly........................73 ..........................73 Removing the Display Assembly ..........................78 Installing the Display Assembly 23 Brackets............................81 ..........................81 Removing the Support Brackets ..........................85...
  • Page 6 Installing the Camera Module 37 Specifications........................143 ............................143 Technical Specifications 38 System Setup.........................149 ................................149 Overview ............................149 Entering System Setup ............................149 System Setup Options 39 Diagnostics..........................157 ................................157 Diagnostics ....157 Device Status LightsBattery Status LightsBattery Charge and HealthKeyboard Status Lights 40 Contacting Dell........................159 ..............................159 Contacting Dell...
  • Page 7: Working On Your Computer

    Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  • Page 8: Recommended Tools

    Close the display and turn the computer upside-down on a flat work surface. NOTE: To avoid damaging the system board, you must remove the main battery before you service the computer. Remove the main battery. Turn the computer top-side up. Open the display.
  • Page 9: After Working Inside Your Computer

    After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer. CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for other Dell computers.
  • Page 11: Battery

    Battery Removing the Battery Follow the procedures in Before Working On Your Computer. Slide the release latches to unlock the battery. Remove the battery from the computer. Related Links Installing the Battery Installing the Battery Slide the battery back into the computer. The release latches automatically click into the lock position.
  • Page 13: Pc Card

    PC Card Removing the PC Card Follow the procedures in Before Working On Your Computer. Press in on the PC latch to release the latch. Press in on the PC latch to release the PC card. Slide the PC card out of the computer. Related Links Installing the PC Card...
  • Page 14: Installing The Pc Card

    Installing the PC Card Push the PC latch to lock it. Push the PC card to its slot until it clicks. Follow the procedures in After Working Inside Your Computer. Related Links Removing the PC Card...
  • Page 15: Secure Digital (Sd) Card

    Secure Digital (SD) Card Removing The Secure Digital (SD) Card Follow the procedures in Before Working On Your Computer. Push in on the SD card. Slide the SD card out of the computer. Related Links Installing The Secure Digital (SD) Card Installing The Secure Digital (SD) Card Slide the SD card into its slot until it clicks into place.
  • Page 17: Subscriber Identity Module (Sim) Card

    Subscriber Identity Module (SIM) Card Removing the Subscriber Identity Module (SIM) Card Follow the procedures in Before Working On Your Computer. Remove the battery. Press and release the SIM card located on the battery wall. Slide the SIM card from the computer. Related Links Installing the Subscriber Identity Module (SIM) Card Installing the Subscriber Identity Module (SIM) Card...
  • Page 19: Expresscard

    ExpressCard Removing the ExpressCard Follow the procedures in Before Working On Your Computer. Push in on the ExpressCard. Slide the ExpressCard out of the computer. Related Links Installing the ExpressCard Installing the ExpressCard Insert the ExpressCard into the slot until it clicks into place. Follow the procedures in After Working Inside Your Computer.
  • Page 21: Back Panel

    Back Panel Removing the Back Panel Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the screws that secure the back panel. Slide and remove the back panel toward the front of the computer . Related Links Installing the Back Panel Installing the Back Panel Slide the back panel towards the back of the computer.
  • Page 23: Keyboard Trim

    Keyboard Trim Removing the Keyboard Trim Follow the procedures in Before Working On Your Computer. Remove the battery. Pry up the keyboard trim from the bottom edge. Pry up the keyboard trim from the top edge. Remove the keyboard trim from the computer. Related Links...
  • Page 24: Installing The Keyboard Trim

    Installing the Keyboard Trim Installing the Keyboard Trim Align the keyboard trim with the tabs on the top of the palm rest. Press along the top edge to latch on the tabs. Work your way around the sides and bottom edge of the keyboard trim. Press the keyboard trim down along all the edges until it clicks into place.
  • Page 25: Keyboard

    Keyboard Removing the Keyboard Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the keyboard trim. Remove the screws that secure the keyboard to the front of the computer. Flip the computer and remove the screws that secure the keyboard to the computer.
  • Page 26 Flip the keyboard.
  • Page 27 Disconnect the keyboard data cable from the computer.
  • Page 28 Remove the keyboard from the computer.
  • Page 29 Disconnect and remove the cable from the keyboard.
  • Page 30: Installing The Keyboard

    Related Links Installing the Keyboard Installing the Keyboard Connect the keyboard-data cable to the system board. Connect the keyboard data cable to the back of the keyboard. Replace the tape to secure the keyboard data cable to the back of the keyboard. Replace the keyboard on the palm rest to align with the screw holes.
  • Page 31: Optical Drive

    Optical Drive Removing the Optical Drive Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the screw that secures the optical drive to the computer. Push the screw tab away from the computer to release the optical drive from the drive bay. Remove the optical drive from the computer.
  • Page 32: Installing The Optical Drive

    Installing the Optical Drive Installing the Optical Drive Slide the optical drive into the drive bay on the right side of the computer. Tighten the screw on the back of the computer to secure the optical drive. Replace the back panel. Replace the battery.
  • Page 33: Hard Drive

    Hard Drive Removing the Hard Drive Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the screws that secure the hard-drive bracket to the computer. Use the tab to pull the hard-drive bracket upward and remove it from the computer. Remove the hard-drive bracket screws.
  • Page 34: Installing The Hard Drive

    Disconnect the bracket from the hard drive. Disconnect the hard-drive connector from the hard drive. Related Links Installing the Hard Drive Assembly Installing the Hard Drive Reconnect the hard-drive connector to the hard drive. Attach the hard-drive bracket to the hard drive. Tighten the hard-drive bracket screws to ensure that the bracket is correctly aligned and holding the hard drive.
  • Page 35: Wireless Local Area Network (Wlan) Card

    Wireless Local Area Network (WLAN) Card Removing the Wireless Local Area Network (WLAN) Card Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Disconnect the antenna cables from the WLAN card. Remove the screw that secures the WLAN card to system board. Remove the WLAN card.
  • Page 36: Installing The Wireless Local Area Network (Wlan) Card

    Related Links Installing the Wireless Local Area Network (WLAN) Card Installing The Wireless Local Area Network (WLAN) Card Slide the WLAN card into its slot. Tighten the screw to secure the WLAN card to the computer. Connect the antenna cables according to the color code on the WLAN card. Replace the back panel.
  • Page 37: Wireless Wide Area Network (Wwan) Card

    Wireless Wide Area Network (WWAN) Card Removing the Wireless Wide Area Network (WWAN) Card Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Disconnect the antenna cables from the WWAN card. Remove the screw that secures the WWAN card to the system board. Remove the WWAN card.
  • Page 38: Installing The Wireless Wide Area Network (Wwan) Card

    Related Links Installing the Wireless Wide Area Network (WWAN) card Installing The Wireless Wide Area Network (WWAN) Card Slide the WWAN card into its slot. Tighten the screw to secure the WWAN card to the computer. Connect the antenna cables according to the color code on the WWAN card. Replace the back panel.
  • Page 39: Memory

    Memory Removing the Memory Module Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Pry the retention clips away from the memory module. Remove the memory module from the computer. Related Links Installing The Memory Module Installing the Memory Module Insert the memory module into the slot in the computer.
  • Page 40 Related Links Removing the Memory Module...
  • Page 41: Cpu Door

    CPU Door Removing the CPU Door Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the screws that secure the CPU door to the computer. Remove the CPU door.
  • Page 42: Installing The Cpu Door

    Related Links Installing the CPU Door Installing the CPU Door Slide the CPU door downwards and towards the back of the computer. Tighten the screws to secure the CPU door. Replace the back panel. Replace the battery. Follow the procedures in After Working Inside Your Computer.
  • Page 43: Heat Sink

    Heat Sink Removing The Heat Sink Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the door. Loosen the screws on the heat sink. Lift the heat sink and remove it from the computer. Related Links Installing The Heat Sink Installing the Heat Sink...
  • Page 44 Follow the procedures in After Working Inside Your Computer. Related Links Removing the Heat Sink...
  • Page 45: Processor

    Processor Removing the Processor Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the door. Remove the heat sink. Rotate the processor-cam screw in counter-clockwise direction. Remove the processor. Related Links Installing the Processor Installing the Processor Insert the processor into the processor socket.
  • Page 46 Replace the battery. Follow the procedures in After Working Inside Your Computer. Related Links Removing the Processor...
  • Page 47: Palm Rest

    Palm Rest Removing the Palm Rest Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the keyboard trim. Remove the keyboard. Remove the optical drive. Remove the door. Remove the screws from the bottom of the computer.
  • Page 48 Flip the computer and remove the screws from the back of the computer.
  • Page 49 10. Disconnect the following cables from the computer: – power button cable – fingerprint cable – touchpad cable...
  • Page 50 11. Lift up the left edge of the palm rest assembly.
  • Page 51 12. Release the tabs on the right edge of the palm rest assembly.
  • Page 52 13. Remove the palm rest assembly from the computer.
  • Page 53: Installing The Palm Rest

    Related Links Installing the Palm Rest Installing the Palm Rest From the left edge of the palm rest, press the palm rest downwards on all the edges on the computer. Press down on all edges to ensure that the tabs are engaged. Connect the following cables to the system board: –...
  • Page 54 Replace the optical drive. 10. Replace the back panel. 11. Replace the battery. 12. Follow the procedures in After Working Inside Your Computer. Related Links Removing the Palm Rest...
  • Page 55: Led Board

    LED Board Removing the LED Board Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the keyboard trim. Remove the keyboard. Remove the optical drive. Remove the door. Remove the palm rest. Remove the screw that secures the LED board to the computer.
  • Page 56 10. Disconnect the LED board cable from the system board connector.
  • Page 57 11. Remove the LED board.
  • Page 58: Installing The Led Board

    Related Links Installing the LED Board Installing the LED Board Insert the LED board on the left bracket. Connect the cable to the system board. Tighten the screw to secure the LED board. Replace the palm rest. Replace the door. Replace the keyboard.
  • Page 59 Related Links Removing the LED Board...
  • Page 61: Expresscard/Smart Card/Pcmcia Module

    ExpressCard/Smart Card/PCMCIA Module Removing the ExpressCard/Smart Card/PCMCIA Module Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the keyboard trim. Remove the keyboard Remove the optical drive. Remove the door. Remove the palm rest.
  • Page 62 10. Disconnect the cage from the system board connector.
  • Page 63 11. Remove the ExpressCard/Smart Card/PCMCIA module.
  • Page 64: Installing The Expresscard/Smart Card/Pcmcia Module

    Related Links Installing the ExpressCard/Smart Card/PCMCIA Module Installing the ExpressCard/Smart Card/PCMCIA Module Attach the connector on the back of the ExpressCard/Smart Card/PCMCIA module, to the connector on the system board. Tighten the screws to secure the ExpressCard/Smart Card/PCMCIA module. Replace the palm rest.
  • Page 65 Related Links Removing the ExpressCard/Smart Card/PCMCIA Module...
  • Page 67: Bluetooth Card

    Bluetooth Card Removing the Bluetooth Card Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the keyboard trim Remove the keyboard. Remove the optical drive. Remove the CPU door. Remove the palm rest. Disconnect the Bluetooth cable from the system board.
  • Page 68 10. Remove the screw that secures the Bluetooth card.
  • Page 69 11. Remove the Bluetooth card.
  • Page 70 12. Disconnect the Bluetooth cable from the Bluetooth card. Related Links Installing the Bluetooth Card.
  • Page 71: Installing The Bluetooth Card

    Installing the Bluetooth Card Connect the Bluetooth cable to the Bluetooth module. Place the Bluetooth module in the computer. Connect the Bluetooth cable to the system board. Replace the palm rest. Replace the door. Replace the keyboard. Replace the keyboard trim.
  • Page 73: Display Assembly

    Display Assembly Removing the Display Assembly Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the keyboard trim. Remove the keyboard. Remove the optical drive. Remove the hard drive. Remove the CPU door. Remove the palm rest.
  • Page 74 11. Remove the antenna cables from the routing channels.
  • Page 75 12. Disconnect the low-voltage differential (LVDS) and the camera cables.
  • Page 76 13. Remove the screws that secure the display assembly to the computer.
  • Page 77 14. Remove the display assembly.
  • Page 78: Installing The Display Assembly

    Related Links Installing the Display Assembly Installing the Display Assembly Attach the display assembly to the base of the computer. Tighten the screws to secure the display assembly. Connect the low-voltage differential (LVDS) cable to the system board. Connect the camera cable to the system board connector. Push the antenna cables through the opening of the bottom of the computer.
  • Page 79 12. Replace the hard drive. 13. Replace the optical drive. 14. Replace the back panel. 15. Replace the battery. 16. Follow the procedures in After Working Inside Your Computer. Related Links Removing the Display Assembly...
  • Page 81: Brackets

    Brackets Removing the Support Brackets Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the keyboard trim. Remove the keyboard. Remove the optical drive. Remove the door. Remove the palm rest. Remove the display assembly.
  • Page 82 11. Remove the right support bracket.
  • Page 83 12. Remove the screws that secure the left support bracket.
  • Page 84 13. Remove the left support bracket.
  • Page 85: Installing The Support Brackets

    Related Links Installing the Support Brackets Installing the Support Brackets Place the right support bracket in the computer. Tighten the screws to secure the right support bracket. Place the left support bracket in the computer. Tighten the screws to secure the left support bracket. Replace the display assembly.
  • Page 86 12. Replace the back panel. 13. Replace the battery. 14. Follow the procedures in After Working Inside Your Computer. Related Links Removing the Support Brackets...
  • Page 87: Modem Card

    Modem Card Removing the Modem Card Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the keyboard trim. Remove the keyboard. Remove the optical drive. Remove the hard drive Remove the door. Remove the palm rest.
  • Page 88 13. Lift the modem card, to disengage from the connector on the back of the card.
  • Page 89 14. Disconnect the modem cable from the modem.
  • Page 90 15. Remove the modem card.
  • Page 91: Installing The Modem Card

    Related Links Installing the Modem Card Installing the Modem Card Connect the modem cable. Attach the connector on the back of the modem card to the connector on the I/O panel. Replace the support brackets. Replace the display assembly. Replace the palm rest.
  • Page 92 12. Follow the procedures in After Working Inside Your Computer. Related Links Removing the Modem Card...
  • Page 93: Audio Board

    Audio Board Removing the Audio Board Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the keyboard trim. Remove the keyboard. Remove the optical drive. Remove the door. Remove the palm rest. Remove the Bluetooth card.
  • Page 94 11. Remove the screw that secures the audio board to the computer.
  • Page 95 12. Remove the audio board.
  • Page 96: Installing The Audio Board

    Related Links Installing the Audio Board Installing the Audio Board Place the audio board in the computer. Tighten the screw to secure the audio board. Connect the audio cables to the system board. Replace the Bluetooth card. Replace the palm rest.
  • Page 97 12. Follow the procedures in After Working Inside Your Computer. Related Links Removing the Audio Board...
  • Page 99: System Board

    System Board Removing the System Board Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the subscriber identity module (SIM) card. Remove the secure digital (SD) card. Remove the back panel. Remove the memory. Remove the keyboard trim.
  • Page 100 22. Disconnect the following cables from the system board: – thermal fan cable – speaker cable – audio board cable – bluetooth cable...
  • Page 101 23. Remove the screws that secure the system board.
  • Page 102 24. Lift the edge of the system board to disconnect it from the input/output (I/O) panel.
  • Page 103 25. Release the system board from the port connectors.
  • Page 104 26. Remove the system board.
  • Page 105: Installing The System Board

    Related Links Installing the System Board Installing the System Board Align the system board to the port connectors and place the system board in the computer. Engage the connector on the back of the system board to the input/output (I/O panel). Tighten the screws to secure the system board.
  • Page 106 Replace the ExpressCard/Smart Card/PCMCIA module. Replace the palm rest. 10. Replace the processor. 11. Replace the heat sink. 12. Replace the door.. 13. Replace the wireless wide area network (WWAN). 14. Replace the wireless local area network (WLAN). 15. Replace the hard drive.
  • Page 107: Coin-Cell Battery

    Coin-Cell Battery Removing the Coin-Cell Battery Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the subscriber identity module (SIM) card. Remove the secure digital (SD) card. Remove the back panel. Remove the memory. Remove the keyboard trim.
  • Page 108 23. Pry and remove the coin-cell battery.
  • Page 109: Installing The Coin-Cell Battery

    Related Links Installing the Coin-Cell Battery Installing the Coin-Cell Battery Connect the coin-cell battery to system board and secure it. Replace the system board. Replace the support brackets. Replace the LED board. Replace the display assembly. Replace the ExpressCard/Smart Card/PCMCIA module.
  • Page 110 12. Replace the wireless wide area network (WWAN). 13. Replace the hard drive. 14. Replace the optical drive. 15. Replace the keyboard. 16. Replace the keyboard trim. 17. Replace the memory. 18. Replace the back panel. 19. Replace the secure digital (SD) card.
  • Page 111: Input/Output Panel

    Input/Output Panel Removing The Input/Output (I/O) Panel Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the subscriber identity module (SIM) card. Remove the secure digital (SD) card. Remove the back panel. Remove the memory Remove the keyboard trim.
  • Page 112 23. Remove the I/O panel.
  • Page 113: Installing The Input/Output (I/O) Panel

    Related Links Installing The Input/Output (I/O) Panel Installing the Input/Output (I/O) Panel Place the I/O panel in the computer. Tighten the screws to secure the I/O panel. Replace the system board. Replace the support brackets. Replace the LED board. Replace the display assembly.
  • Page 114 12. Replace the wireless local area network (WLAN). 13. Replace the wireless wide area network (WWAN). 14. Replace the hard drive. 15. Replace the optical drive. 16. Replace the keyboard. 17. Replace the keyboard trim. 18. Replace the memory. 19. Replace the back panel.
  • Page 115: Power Connector

    Power Connector Removing the Power Connector Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the subscriber identity module (SIM) card. Remove the secure digital (SD) card. Remove the back panel. Remove the memory. Remove the keyboard trim.
  • Page 116 23. Remove the power connector.
  • Page 117: Installing The Power Connector

    Related Links Installing the Power Connector Installing the Power Connector Secure the DC-In port to the routing channel on the processor fan. Replace the system board. Replace the support brackets. Replace the LED board. Replace the display assembly. Replace the ExpressCard/Smart Card/PCMCIA module.
  • Page 118 12. Replace the wireless local area network (WLAN). 13. Replace the hard drive. 14. Replace the optical drive. 15. Replace the keyboard. 16. Replace the keyboard trim. 17. Replace the memory. 18. Replace the back panel. 19. Replace the secure digital (SD) card.
  • Page 119: Modem Connector

    Modem Connector Removing the Modem Connector Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the subscriber identity module (SIM) card. Remove the secure digital (SD) card. Remove the back panel. Remove the memory. Remove the keyboard trim.
  • Page 120 25. Remove the modem connector.
  • Page 121: Installing The Modem Connector

    Related Links Installing the Modem Connector Installing the Modem Connector Secure the modem connector into the routing channel on the thermal fan. Replace the system board. Replace the support brackets. Replace the audio board. Replace the bluetooth. Replace the audio board.
  • Page 122 12. Replace the door. 13. Replace the wireless local area network (WLAN) 14. Replace the wireless wide area network (WWAN) 15. Replace the hard drive. 16. Replace the optical drive. 17. Replace the keyboard. 18. Replace the keyboard trim. 19. Replace the memory.
  • Page 123: Thermal Fan

    Thermal Fan Removing the Thermal Fan Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the subscriber identity module (SIM) card. Remove the secure digital (SD) card. Remove the back panel. Remove the memory. Remove the keyboard trim.
  • Page 124 23. Remove the screw that secures the thermal fan.
  • Page 125 24. Remove the thermal fan.
  • Page 126: Installing The Thermal Fan

    Related Links Installing the Thermal Fan Installing the Thermal Fan Connect the processor fan in the computer. Tighten the screws to secure the processor fan. Secure the power connector and the modem connector cables to the routing channels. Replace the system board.
  • Page 127 12. Replace the door. 13. Replace the wireless local area network (WLAN). 14. Replace the wireless wide area network (WWAN). 15. Replace the hard drive. 16. Replace the optical drive. 17. Replace the keyboard. 18. Replace the keyboard trim. 19. Replace the memory. 20.
  • Page 129: Speaker

    Speaker Removing the Speakers Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the subscriber identity module (SIM) card. Remove the secure digital (SD) card. Remove the back panel. Remove the memory. Remove the keyboard trim. Remove the keyboard.
  • Page 130: Installing The Speakers

    26. Remove the speakers. Related Links Installing the Speakers Installing the Speakers Secure the speaker cables to the routing channels. Connect the speakers. Tighten the screws to secure the speakers. Replace the audio board. Replace the Bluetooth. Replace the system board.
  • Page 131 21. Replace the keyboard trim and keyboard. 22. Replace the memory. 23. Replace the back panel. 24. Replace the secure digital (SD) card. 25. Replace the subscriber identity module (SIM) card. 26. Replace the battery. 27. Follow the procedures in After Working Inside Your Computer.
  • Page 133: Display Bezel

    Display Bezel Removing the Display Bezel Follow the procedures in Before Working On Your Computer. Remove the battery. Pry up the bottom edge of the display bezel. Work your way around the sides and the top edge of the display bezel. Remove the display bezel.
  • Page 134: Installing The Display Bezel

    Installing the Display Bezel Installing the Display Bezel Place the display bezel on the computer. From the top edge, press downward on the display bezel to engage the tabs om all the edges. Work your way around the side and the bottom edge. Replace the battery.
  • Page 135: Display Panel

    Display Panel Removing the Display Panel Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the display bezel. Remove the screws that secure the display panel. Disconnect the low-voltage differential signaling (LVDS) cable from the back of the display panel. Remove the display panel from the display assembly.
  • Page 136: Installing The Display Panel

    Remove the screws that secure the display brackets to the display panel and remove the brackets. Related Links Installing the Display Panel Installing the Display Panel Align the display brackets with the display panel. Tighten the screws to secure the display panel. Connect the low-voltage differential signaling (LVDS) cable to the back of the display panel.
  • Page 137: Display Hinges

    Display Hinges Removing the Display Hinges Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the back panel. Remove the keyboard trim. Remove the keyboard. Remove the optical drive. Remove the CPU door. Remove the palm rest. Remove the display assembly.
  • Page 138: Installing The Display Hinges

    15. Remove the hinge caps from the display hinges. Related Links Installing the Display Hinges Installing the Display Hinges Secure the display hinge caps onto the ends of the hinges. Insert the display hinges into the hinge towers. Insert the low-voltage differential signaling (LVDS) cable into the left hinge tower. Replace the left hinge on the display cover.
  • Page 139 Removing the Display Hinges...
  • Page 141: Camera

    Camera Removing the Camera Module Follow the procedures in Before Working On Your Computer. Remove the battery. Remove the display bezel. Remove the display panel. Disconnect the camera cable. Loosen the screw that secures the camera module. Lift and remove the camera module.
  • Page 142: Installing The Camera Module

    Related Links Installing the Camera Module Installing the Camera Module Place the camera module on the display cover. Tighten the screw to secure the camera. Connect the camera cable to the camera module. Replace the display panel Replace the display bezel. Replace the battery.
  • Page 143: Specifications

    For more information regarding the configuration of your computer, click Start → Help and Support and select the option to view information about your computer. System Information Chipset Latitude 5420/E5420/ 5520/E5520 Intel HM65 Express chipset Latitude E5420m/E5520m Intel GM45 Express chipset...
  • Page 144 1.5 W mono Volume controls media buttons for Media control Video Type Intel UMA video Data bus integrated video Video controller Latitude 5420/E5420/5520/E5520 Intel HD Graphics Intel HD Graphics 3000 Latitude E5420m/E5520m Intel GM45 Output 15-pin video connector 19-pin HDMI connector Communications...
  • Page 145 Display Type White Light Emitting Diode (WLED) display Size Latitude 5420/E5420/E5420m 14.0 inch high definition WLED Latitude 5520/E55420/E5520m 15.6 inch high definition WLED Active area (X/Y) Latitude 5420/E5420/E5420m 309.60 mm/173.90 mm Latitude 5520/E55420/E5520m 344.20 mm/193.50 mm Dimensions: Height Latitude 5420/E5420/E5420m 192.50 mm (7.57 inches)
  • Page 146 Display Pixel pitch Latitude 5420/E5420/E5420m 0.2265 mm x 0.2265 mm 0.1935 mm x 0.1935 mm Latitude 5520/E55420/E5520m 0.2520 mm x 0.2520 mm 0.1935 mm x 0.1935 mm Keyboard Number of keys United States: 86 keys, United Kingdom: 87 keys, Brazil: 87...
  • Page 147 0 °C to 40 °C (32 °F to 104 °F) Non-Operating –40 °C to 70 °C (–40 °F to 158 °F) Physical Height Latitude 5420/E5420/E5420m 29.90 mm to 32.50 mm (1.18 inches to 1.28 inches) Latitude 5520/E5520/E5520m 30.20 mm to 33.20 mm (1.19 inches to 1.31 inches) Width...
  • Page 148 Physical Latitude 5420/E5420/E5420m 350.00 mm (13.78 inches) Latitude 5520/E5520/E5520m 388.00 mm (15.28 inches) Depth Latitude 5420/E5420/E5420m 240.00 mm (9.45 inches) Latitude 5520/E5520/E5520m 251.00 mm (9.88 inches) Weight Latitude 5420/E5420/E5420m 2.27 kg (5.00 lb) Latitude 5520/E5520 2.54 kg (5.60 lb) Latitude E5520m 2.63 kg (5.80 lb)
  • Page 149: System Setup

    Entering System Setup Turn on (or restart) your computer. When the blue DELL logo is displayed, you must watch for the F2 prompt to appear. Once the F2 prompt appears, press <F2> immediately. NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so you must watch for it to display, and then press <F2>...
  • Page 150 General • USB Storage Device • CD/DVD/CD-RW Drive • Onboard NIC • Cardbus NIC Boot List Option Allows you to change the boot list option. • Legacy • UEFI Date/Time Allows you to change the date and time. System Configuration Integrated NIC Allows you to configure the integrated network controller.
  • Page 151 System Configuration Default Setting: AT Serial Port Allows you to configure the integrated serial port. The options are: • Disabled • COM1 • COM2 • COM3 • COM4 Default Setting: COM1 SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are: •...
  • Page 152 System Configuration • Disabled • Level is 25% • Level is 50% • Level is 50% • Levels is 100% Default Setting: Level is 75% Drives Allows you to configure the SATA drives on board. The options are: • SATA-0 •...
  • Page 153 Security Default Setting: Disabled Password Change Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is set. Default Setting: Allow Non-Admin Password Changes is not selected Strong Password Allows you to enforce the option to always set strong passwords. Default Setting: Enable Stron Password is not selected.
  • Page 154 Performance • Default Setting: All Intel® SpeedStep™ Allows you to enable or disable the Intel SpeedStep feature. Default Setting: Enable Intel SpeedStep C States Control Allows you to enable or disable the additional processor sleep states. Default Setting: The options C states, C3, C6, Enhanced C-states, and C7 options are enabled.
  • Page 155 Power Management Charger Behavior Allows you to enable or disable the battery charger. The options are; • Disabled • Enabled Default Setting: Enabled POST Behavior Adapter Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters.
  • Page 156 Wireless • WLAB • Bluetooth Default Setting: All the options are selected. Wireless Device Enable Allows you to enable or disable the wireless devices. Maintenance Service Tag Displays the Service Tag of your computer. Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
  • Page 157: Diagnostics

    If the computer is connected to an electrical outlet, the battery light operates as follows: Alternately blinking amber light and blue light An unauthenticated or unsupported non-Dell AC adapter is attached to your laptop. Alternately blinking amber light with steady blue light Temporary battery failure with AC adapter present.
  • Page 158: Keyboard Status Lights

    capacity remains. Each light represents incremental degradation. If five lights appear, less than 60 percent of the charge capacity remains, and you should consider replacing the battery. Keyboard Status Lights The lights located above the keyboard indicate the following: Turns on when the numeric keypad is enabled. Turns on when the Caps Lock function is enabled.
  • Page 159: Contacting Dell

    Visit support.dell.com. Select your support category. If you are not a U.S. customer, select your country code at the bottom of the support.dell.com page, or select All to see more choices. Select the appropriate service or support link based on your need.

This manual is also suitable for:

Latitude e5420Latitude e5420m

Table of Contents