Auto Surround-"Auto Sr; Video Output Mode-"Vout - JVC RX-DV3SL Instructions Manual
Home cinema dvd/cd control center
Hide thumbs
Also See for RX-DV3SL:
- Instructions manual (76 pages) ,
- Service manual (28 pages) ,
- Instructions manual (76 pages)
Table of Contents
Advertisement
Basic Settings
7
Auto surround—"AUTO SR"
DIGITAL AUTO
AUTO SURROUND
L
R
Surround mode is automatically activated when the digital
multichannel source such as Dolby Digital or DTS Digital
Surround software or 2-channel matrix source such as Dolby
Surround is played back.
You can enjoy Surround mode simply by selecting the source
(with digital input selected for that source)—Auto Surround.
Select one of the following settings:
ON
: The AUTO SURROUND indicator always lights up
on the display.
• If multichannel signals come in, an appropriate
•If Dolby Digital 2-channel or DTS 2-channel
• If Dolby Digital 2-channel or DTS 2-channel
•If the other signals come in, nothing will change.
OFF
: Select this to deactivate Auto Surround.
Notes:
• "ON" is the initial setting. If you have already changed the
setting, "OFF" will be shown.
• This function does not take effect in the following cases:
– While playing an analog source.
– While selecting "DGTL D.D." or "DGTL DTS" as the fixed
digital input mode (see page 13).
• If you press SURROUND ON/OFF (SURR ON/OFF on the
remote control) with Auto Surround activated, Auto Surround
will be canceled temporarily for the currently selected source.
Auto Surround setting will be restored in the following cases:
– When you turn off and on the unit,
– When you change the source,
– When you change the analog/digital input, and
– When you reset "AUTO SR" to "ON" again.
SPK.
Surround mode will be turned on.
including surround signals come in, "PL II
MOVIE" will be selected.
signals without surround signals come in,
"STEREO" will be selected.
7
Video output mode—"VOUT"
DIGITAL AUTO
L
R
VOLUME
After connecting your TV to the unit, register the type of the
connected output terminal—VIDEO, S-VIDEO, or
DVD COMPONENT VIDEO OUT.
Without setting this, AV COMPU LINK does not work
appropriately when DVD is selected as the source (see
"AV COMPU LINK Remote Control System" on pages 57 and
58).
Set the output terminal appropriately.
VIDEO
: Select this when you connect your TV to VIDEO
S
: Select this when you connect your TV to S-VIDEO
COMPNT : Select this when you connect your TV to DVD
Note:
• "VIDEO" is the initial setting. If you have already changed the
setting, another setting will be shown.
SPK.
jack by using a composite video cord.
jack by using an S-video cord.
COMPONENT VIDEO OUT jacks by using
component video cord.
VOLUME
22
Advertisement
Table of Contents
