Page 1
Digital Copier AR-287 (AR-287/337) (AR-407) AR-337 AR-407 AR-507 MODEL (AR-507) CONTENTS [Note] This Service Manual describes only the differences from 00ZAR-505//A1E. The items which are not described in this Manual are common with the 00ZAR505//A1E. [ 1 ] GENERAL ......... . . 1-1 [ 2 ] SPECIFICATIONS.
The AR-287/337/407/507 is a slightly upgraded model of the AR-286/336/405/505. The base models and their upgraded models are listed in the table below. Upgrade list Base model Upgraded model AR-286 AR-287 AR-336 AR-337 AR-405 AR-407 AR-505 AR-507 List of changes AR-286/336/405/505 to AR-287/337/407/507...
B. List Change Refer to the C. Details of simulations attached page Change (Delete: TONER SAVE) 7-51 – 7-57. Change (Default value: AR-287/337/407) Change (Default value: AR-287/337/407) Change (Default value: AR-287/337/407) 22-1 Change (Delete: Fax item) 26-10/12/13 26-22 Change (Add: ITALIAN/SWEDISH/DUTCH)
Page 5
2. System outline (Options) (AR-287/337/AR-407/507) Copier model Name Model AR-287 AR-337 AR-407 AR-507 Automatic document feeder RSPF — — — Standard Reversing automatic document feeder AR-RF1 Standard Standard — — AR-RF2 — — Standard — Stand/500 sheet paper drawer AR-DE1N —...
Page print Confidential print Security function Security ROM is installed. (AR-FR1/FR2/FR3) When the tandem connection cable is connected Tandem print (copy/print) (AR-287 invalid) Network scanner When the scanner expansion kit is installed Document scan mode (Large quantity Documents of 120 sheets document mode) 2 –...
Page 8
21. Tandem function AR-505 AR-507/407/337 Model Copy Copy Client PC Print Printer kit Tandem print ON/OFF selection Limitation • System limitation (Mirror configuration) Two models in tandem connection must be of the same ROM version and the same option composition. Relationship between MAIN and SUB: (Outline) ·...
1: "Option" means a finisher, an ADU, a paper feed desk, a large- (Outline) capacity tray, or a paper feed module. To protect confidential documents, print is inhibited unless the user (Operations when there is a difference between the option com- performs the specified operation from the main operation panel after positions) giving a print command from PC.
(9) Operations when the printer department 24. Security function management function is set · Security function When the key operator program (to record the print quantity to ON/OFF each department) is ON, the department management function is valid to confidential print. ·...
Maximum Document Size A3/WLT attachment of notes, edition, save of documents, and conversion into Original Feeding Speed (PPM) 24PPM: AR-287 the PDF type. Furthermore, it allows scanning, printing, transmission 24PPM: AR-337 functions (e-mail, FAX), binding of documents, and starting of other...
The above functions are available as standard provision only when tion of the attached file. That is, transmission of an attached file can AR-PB2A and the AR-NC3D are installed. For (2), the software key be made only when the AR-PB2A is installed to the AR-287/ protect is made. 337/407/507.
[3] CONSUMABLE PARTS (AR-287/337/407) 1. Consumable Parts List A. USA AR-287/337 ITEM CONTENTS LIFE MODEL NAME REMARKS ´1 Lower Heat Roller Replacement of fusing separation pawl for every 90 Lower Heat Roller Kit 160K AR-505LH ´2 Fusing Separation Pawl (lower) K should be done using those supplied separately.
Page 14
E. Middle East / Africa AR-287/337 ITEM CONTENTS LIFE MODEL NAME REMARKS ´1 Upper Heat Roller ´1 Lower Heat Roller ´1 160K PM Kit Toner Receiving Seal 160K AR-337KB ´1 DV Seal ´1 Heat Roller Gear ´1 Lower Heat Roller...
Page 15
Operation/ (The developing bias output voltage of each print mode Procedure can be adjusted and checked.) (AR-287/337/AR-407/507) 1. Select the print mode with [] key and [¯] key. 2. Enter the adjustment value with the 10-key pad. B. List 3. Press the [EXECUTE] key.
Page 16
[EXECUTE] key returns to the nor- Procedure and the back of paper can be adjusted and checked. mal display. (AR-287/337/407) 1. Select the print mode with [] key and [¯] key. * (602) (–603 ±5V) AUTO : Auto mode 2.
Page 17
(The selected item is highlighted.) BACK MODE: Back surface print (with duplex paper feed) 2. Set the item and conditions with the 10-key pad. (AR-287/337) 3. Press the [EXECUTE] key to print various data. A: Paper feed mode 1: Manual paper feed...
Page 18
When the SCSI channel is set to "20," if a software key which 26 - 22 does not correspond to the setup is entered, the setup of "20" is changed to "1." Purpose Setting Function Used to set the specification (language display) for the (Purpose) destination.
Page 19
Either of the above values is set. Purpose Adjustment AR-287 is not provided with the tandem setting. Function Used to adjust the copy image position and the void However, the display is not changed. When tandem setup is tried, it (Purpose) area (image loss) on the print paper in the copy mode.
0 ~ 99 Item Operation binding left image (when the RSPF is used) Operation/ (AR-287/337) Clear quantity of the folding section of center 0 ~ 99 binding right image (when the RSPF is used) Procedure All must be set to "8."...
Page 21
Laser (Exposure) 4. After normal completion, "END" is outputted. In case of any Item Operation trouble, "NG" is outputted. Operation/ (AR-287/337) [When the CA key is pressed, reset is performed.] Procedure Set default value 8. (AR-407) Set default value 6.
[9] TROUBLE CODE LIST (AR-287/337/407/507) 1. Trouble code Trouble code Content of trouble Remark Trouble detection The other communication error has occurred. Network The print server card (AR-NC3D) is not installed or defective. Network The specified mail server or the FTP server is not found.
Page 25
CAUTION FOR BATTERY REPLACEMENT (Danish) ADVARSEL ! Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandoren. (English) Caution ! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
Page 26
SHARP CORPORATION Digital Document Systems Group Quality & Reliability Control Center Yamatokoriyama, Nara 639-1186, Japan...