Table of Contents
Advertisement
Code
Function
264
Magnetic tape
drive
92
IBM IntelliStation M Pro Types 6220 and 6230: User's Guide
Result
Text message
Aborted
Test setup error: No tape drive found
Failed
The load/mount test failed for device n on adapter
m
(where n is the number of the device and m is the
adapter number)
The self-diagnostic failed for device n on adapter
m.
(where n is the number of the device and m is the
adapter number)
The unload/eject test failed for device n on
adapter m
(where n is the number of the device and m is the
adapter number)
The unload/eject push button test failed for device
n on adapter m
(where n is the number of the device and m is the
adapter number)
The Read/Write Self-diagnostic failed for device n
on adapter m
(where n is the number of the device and m is the
adapter number)
Action
1. Check the cables and
power connections to
the drive.
2. See the information
provided with the
tape drive.
3. See the error
messages and text in
the PC-Doctor error
log for detailed
information about
each tape drive error.
4. If the problem
remains, call for
service.
See the information
provided with the tape
drive.
If the problem remains,
call for service.
Note: The push button
test is applicable only to
SCSI tape drives that
have a push button.
Insert a new tape
cartridge; then, run the
diagnostic test again.
See the information that
is provided with the tape
drive.
If the problem remains,
call for service.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
