Table of Contents
Advertisement
Cabling an optional SCSI adapter
You can install an optional SCSI adapter in your computer to control the internal
hard disk drives. With a SCSI adapter installed, you can configure the internal hard
disk drives into disk arrays. You can also cable a SCSI adapter to external hard
disk drives. See your SCSI adapter option documentation for complete instructions
for installing a SCSI adapter in your computer and for additional information about
SCSI adapters.
Notes:
1. An optional SCSI adapter is required to connect external SCSI devices.
2. The SCSI cables used by the integrated SCSI controller cannot be used with an
Complete the following steps to cable an optional SCSI adapter:
1. Install the SCSI adapter (see "Installing an adapter" on page 56).
2. Connect the SCSI-signal cable to the adapter and to one or more of the
3. Connect the SCSI-activity-indicator cable to the adapter and to the SCSI-LED
4. Complete the installation of the optional SCSI adapter.
58
IBM IntelliStation M Pro Types 6220 and 6230: User's Guide
optional SCSI adapter.
signal-cable connectors on the rear of the SCSI devices.
connector on the system board. See "System-board internal connectors" on
page 52 for the location of the SCSI-LED connector.
SCSI
signal
cable
Rear
adapter
support
bracket
SCSI signal
cable connector
SCSI activity
SCSI
indicator cable
adapter
connector
SCSI
activity
indicator
cable
13
94
SCSI
Front
LED
adapter
support
bracket
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
