Accessory overview 1. Stereo Insert stereo cables to connect the device to a stereo. connectors (Left/ Right) 2. Micro USB port Insert charger cable to power on the device. 3. Notification light Flashing blue light indicates the device is visible to other Bluetooth®...
Basics To power on the music receiver Plug one end of the charger cable into the charger. Plug the other end of the cable into the Micro USB port of the music receiver. A white notification light illuminates briefly to indicate that the device is powered on.
If not, press and hold the Pair/Connect button until the notification light flashes blue. Phone: Scan for Bluetooth® devices, then select BM10 in the available devices list. Follow the pairing instructions that appear on your phone. If a PIN code is required, enter "0000".
There are three ways to disconnect your phone from or reconnect it with the music receiver: • Deselect or select BM10 in the list of paired Bluetooth® devices in your phone. • Place your phone over the music receiver so that the NFC detection area of each device touches the other.
Smart Connect You can use the Smart Connect application on your phone to automatically stream music to the music receiver when the phone is connected with the receiver. Setting up such an action in the Smart Connect application is known as creating an event.
Legal information Music Receiver BM10 This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications AB at any time and without notice.
Page 9
Industry Canada Statement This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.