TV Settings Menu
System Update
Used to update the TV's system software in the future.
Clock/Timers
Sleep Timer
On Timer
Clock Set
Eco
Reset
Power Saving
Idle TV Standby
PC Power
Management
Light Sensor
Picture
Target Inputs
24
GB
Sets the TV to automatically switch to standby mode after a certain amount of
time.
When "Sleep Timer" is activated, the
lights up in orange.
z
• When you turn off the TV and turn it on again, "Sleep Timer" is reset to "Off".
Sets the TV to automatically turn on from standby mode.
Allows you to adjust the clock manually.
~
• "Clock Set" will automatically reset when you turn off the AC power.
Resets all the "Eco" settings to the factory settings.
Reduces power consumption of the TV by adjusting the backlight.
When you select "Picture Off", the picture is switched off, and the
indicator on the TV front panel lights up in green. The sound remains unchanged.
Turns the TV off after it has been kept idle for the preset length of time.
Switches the TV to standby mode when the TV receives no signal from the PC
input source for 30 seconds.
Automatically optimises the picture settings according to the ambient light in the
room.
~
• Do not put anything over the sensor, doing so may affect its function. See page 14
to check the position of the sensor.
Allows you to select whether to use the common settings or to make custom
settings for the input you are currently viewing.
Common
Applies common settings to all inputs in which "Target
Inputs" is set to "Common".
Name of current
Allows you to make custom settings for the input.
input (e.g. Video
1)
(Timer) indicator on the TV front panel
(Picture Off)