Safe Operation Practices for Walk-Behind Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERAL OPERATION • Read, understand, and follow all instructions on the machine and in the manual(s) before starting.
Please read and retain this manual. The instructions will enable you to assemble and maintain your lawn mower properly. Always observe the “SAFETY RULES”. SERIAL NUMBER: _________________________________...
IMPORTANT: THIS LAWN MOWER IS SHIPPED WITH- OUT OIL OR GASOLINE IN THE ENGINE. Your new lawn mower has been as sem bled at the factory with the ex cep tion of those parts left unassembled for ship- ping purposes. All parts such as nuts, washers, bolts, etc., necessary to com plete the as sem bly have been placed in the parts bag.
FRAME VINYL BINDINGS TO INSTALL ATTACHMENTS Your lawn mower was shipped ready to be used as a mulcher. To convert mower to bagging or discharging, see “TO CON VERT MOWER” in the Operation section of this man u al. FRONT...
KNOW YOUR LAWN MOWER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
The operation of any lawn mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask over spectacles.
Page 8
TO CONVERT MOWER (See Figs. 7 thru 9) Your lawn mower was shipped ready to be used as a mulcher. To convert to rear bagging or side discharging: REAR BAGGING • Remove knob securing mulcher door to mower housing. •...
Page 9
2. Mulcher door secured to mower housing with knob. FOR REAR BAGGING - 1. Side discharge defl ector removed. 2. Grass catcher and discharge chute installed with discharge chute secured to lawn mower housing with knob. 3. Round door of discharge chute resting on top of grass catcher.
BEFORE STARTING ENGINE ADD OIL (See Figs. 12 and 13) Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see “EN GINE” in the Maintenance section of this manual. CAUTION: DO NOT overfi ll engine with oil, or it will smoke on startup.
• For best results, adjust the lawn mower cutting height so that the lawn mower cuts off only the top one-third of the grass blades (See Fig. 15). If the lawn is over- grown it will be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of mulched grass.
Use a scraper to clean under deck GENERAL RECOMMENDATIONS The warranty on this lawn mower does not cover items that have been subjected to operator abuse or negli- gence. To receive full value from the warranty, opera- tor must maintain mower as instructed in this manual.
Page 13
Change the oil after every 25 hours of operation or at least once a year if the lawn mower is not used for 25 hours in one year. Check the crankcase oil level before starting the engine and after each fi...
2. Remove engine oil cap; lay aside on a clean surface. 3. Tip lawn mower on its side as shown and drain oil into a suitable container. Rock lawn mower back and forth to remove any oil trapped inside of engine.
Page 15
4. Pivot idler arm assembly to slacken drive belt, then remove drive belt from drive pulley, belt keepers and idler arm. 5. Turn lawn mower on its side. Make sure air fi lter and carburetor are up. 6. Remove screw securing debris shield. Note that the debris shield has a tab which fi...
3. Align opposite side of handle with same positioning hole and secure with bolt and knob. Immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more. LAWN MOWER When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc.
HANDLE (See Figs. 23 and 24) You can fold your lawn mower handle for storage. NOTE: The upper handle has an “anti-fold” bracket located on the left side of the handle. This bracket prevents the upper handle from folding forward, which helps protect control cable(s) from damage.
1. Depress control bar to upper handle before pulling starter rope. 2. Contact a qualifi ed service center. 3. Replace blade adapter. 4. Move lawn mower to cut grass or other hard surface before starting. 1. Raise cutting height. 2. Replace blade.
ROTARY LAWN MOWER - - MODEL NUMBER 917.374781 (65RSW21HVB) GEAR CASE ASSEMBLY - - PART NUMBER 532183699 PART 817541011 532160672 532057072 532183908 532160818 532077881 532160817 532850848 532184134 532160679 532160673 532057079 812000039 532086447 532750369 532184208 NOTE: All component dimensions given in U.S. inches.
Page 20
ROTARY LAWN MOWER - - MODEL NUMBER 917.374781 (65RSW21HVB)
Page 22
ROTARY LAWN MOWER - - MODEL NUMBER 917.374781 (65RSW21HVB)
Page 23
ROTARY LAWN MOWER - - MODEL NUMBER 917.374781 (65RSW21HVB) PART DESCRIPTION 532185312 Drive Control Assembly, Complete (Consists of Key Numbers 2 through 7) 532188279 Cover, Drive Control, Top 532187353 Pulley, Drive Control 532185964 Lever, Drive Control (blue) 532188278 Cover, Drive Control, Bottom...