Table of Contents
Related Manuals for TAIKO AG-800
Summary of Contents for TAIKO AG-800
- Page 1 AG-800 User’s Manual SMS Alert Gateway SMS Alert Gateway AG-800 USER’S MANUAL Rev 2.0 01 Nov 2006 All contents are subjected to change without prior notice Rev 2.0 Page 1 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd...
-
Page 2: Table Of Contents
SMS Alert Gateway AG-800 User Manual Contents Page System Features .........................4 AG-800 Product Specification ..................5 Hardware Reference......................6 Installation guide for AG-800 Configuration Software ..........8 Important Notes .........................8 Hardware Setup.........................9 Accessing the GUI......................10 “Handphone List” Tab....................11 “Group List” Tab ......................12 “Point List” Tab......................13 “Communication”... -
Page 3: Ag-800 User Manual
SIM card for the gateway. The gateway can be installed in any location under GSM coverage. A software program, “AG-800 GUI” is provided for configuring the gateway. Alert settings, such as mobile phone numbers, alert SMS message, alarm condition is configurable in a text-based document and loaded through the “AG-800 GUI”. -
Page 4: System Features
Configuration can be done remotely via USB port. Device name allocation for easier understanding rather than alarm point number solely. All contents are subjected to change without prior notice Rev 2.0 Page 4 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd... -
Page 5: Ag-800 Product Specification
Number of inputs: 8 Digital inputs, volt-free contacts Number of outputs: 4 Relay Outputs (30mA max) USB port for configuration. All contents are subjected to change without prior notice Rev 2.0 Page 5 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd... -
Page 6: Hardware Reference
The LED will be turned on under 2 circumstances:- In-built modem is not detected by the embedded micro-controller. All contents are subjected to change without prior notice Rev 2.0 Page 6 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd... - Page 7 DO1, DO2, DO3,…. etc. Digital Outputs. Power Connector Connector to provide power supply to the gateway. 24 VDC All contents are subjected to change without prior notice Rev 2.0 Page 7 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd...
-
Page 8: Installation Guide For Ag-800 Configuration Software
SMS Alert Gateway Installation guide for AG-800 Software (1) Insert the AG-800 CD into user’s PC CD-ROM. (2) Install the AG800 configuration by double clicking the “Setup.exe”. (3) After completion, plug in the AG800 via USB to the PC USB port. Power up the device and the PC will detect an unknown USB device requiring a driver. -
Page 9: Hardware Setup
“Device Manager”, there should be an indication for ports. Expand the “Ports” display to show which port the USB is currently using. All contents are subjected to change without prior notice Rev 2.0 Page 9 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd... -
Page 10: Accessing The Gui
SMS be sent to. - “Communication” ----- For uploading and downloading of the settings to the device. All contents are subjected to change without prior notice Rev 2.0 Page 10 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd... -
Page 11: Handphone List" Tab
Click on insert to put the number keyed in into the list. This list is required for later stages to be used at the grouping configuration. All contents are subjected to change without prior notice Rev 2.0 Page 11 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd... -
Page 12: Group List" Tab
Group 8 is for handphone numbers of the administrator. Settings for the particular group of handphone number can be configured here. All contents are subjected to change without prior notice Rev 2.0 Page 12 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd... - Page 13 This will provide the option for more levels of escalation delays as user can freely configure up to 10 different levels of escalation and each escalation of up to an hour difference. All contents are subjected to change without prior notice Rev 2.0 Page 13 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd...
-
Page 14: Point List" Tab
Note: To have the gateway not sending any sms upon alarm or recovery, leave the field under the ON/OFF Message blank. Note: If there is no escalation to next level, reminder sms will not be sent. All contents are subjected to change without prior notice Rev 2.0 Page 14 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd... -
Page 15: Communication" Tab
- To show the status of the current upload or download in detail. Overall Progress Bar - Visual display of the progress of the uploading or downloading status. All contents are subjected to change without prior notice Rev 2.0 Page 15 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd... -
Page 16: Interaction With Device By Means Of Sms
Mobile phone numbers are to be added with prefix. All contents are subjected to change without prior notice Rev 2.0 Page 16 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd... - Page 17 Recover a DO point hh:mm> Group E.g.: off(b), Off(c) j: denotes index “a” to “d” All contents are subjected to change without prior notice Rev 2.0 Page 17 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd...
- Page 18 A predefined mobile phone user will receive reply message, or “Unrecognized SMS”, if he tries to request status of an invalid alarm point. All contents are subjected to change without prior notice Rev 2.0 Page 18 of 18 Copyright © 2005 Taiko Network Communications Pte Ltd...