hit counter script
Mitsubishi Electric WD-52628 Owner's Manual
  1. Manuals
  2. Brands
  3. Mitsubishi Electric Manuals
  4. Projection TV
  5. WD-52628
  6. Owner's manual
Mitsubishi Electric WD-52628 Owner's Manual

Mitsubishi Electric WD-52628 Owner's Manual

Mitsubishi electric projection television owner's guide
Hide thumbs Also See for WD-52628:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
WD-52628
WD-62628
WD-73727
Projection Television
Owner's Guide
TV Information
Use this space to record the model number and serial
number of your television. This information is on the back
of your TV.
Model Number
Serial Number
Purchase Date
visit our website at
www.mitsubishi-tv.com
TM

Advertisement

Table of Contents
loading

Related Manuals for Mitsubishi Electric WD-52628

Summary of Contents for Mitsubishi Electric WD-52628

  • Page 1 WD-52628 WD-62628 WD-73727 Projection Television Owner’s Guide TV Information Use this space to record the model number and serial number of your television. This information is on the back of your TV. Model Number Serial Number Purchase Date visit our website at...
  • Page 2 Call (800) 332-2119. Please TV Model Number Lamp Part Number have model number, serial number, and TV purchase WD-52628, WD-62628 915P026010 date available. WD-73727 915P027010 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
  • Page 3 FCC Declaration of Conformity Product: Projection Television Receiver Models: WD-52628, WD-62628, WD-73727 Responsible Party: Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road Irvine, CA 92618-1904 Telephone: 949-465-6000 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 4: Important Safeguards

    IMPORTANT SAFEGUARDS Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference.

  • Page 5: Replacement Parts

    IMPORTANT SAFEGUARDS , continued 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

  • Page 6: Table Of Contents

    Contents Chapter 1: Television Overview TV Accessories ..............Special Features .
  • Page 7 Chapter 4: NetCommand® Functions Device Selection Menu ............. . Using the Device Menu Button to Display Menus .

  • Page 8: Our Thanks

    Our Thanks... Thank you for choosing Mitsubishi as your premier Home Entertainment provider This Owner’s Guide describes the features and functions of your Mitsubishi widescreen, high definition TV. We urge you to examine this Owner’s Guide to become familiar with the innovative features and operations this unique television offers.
  • Page 9 Chapter . . . Television Overview TV Accessories ........Special Features .

  • Page 10: Chapter 1: Television Overview

    TV Accessories Please take a moment to review the following list of items to ensure that you have received everything. 3. One Digital Audio Cable (sends the audio of digital channels to a digital audio/video receiver). 4. One Four-Headed IR Emitter Cable (allows NetCommand and TV Guide On Screen®...

  • Page 11: Special Features

    Special Features Your new High Definition widescreen television has many special features that make it the perfect center of your home entertainment system, including: High Definition DLP™ Display System Your widescreen Mitsubishi HDTV uses Texas Instruments most advanced Digital Light Processing™ technology for rear projection televisions.

  • Page 12: Front Control Panel

    TV menus displayed on the screen. The bottom row of labels shows the control functions when the TV menus are displayed on the screen or when a special function has been activated. See “Remote Control Overview” for further details on the functions of these buttons. Models WD-52628, WD-62628 Model WD-73727 Front Control Panel 1.
  • Page 13 Front Control Panel, continued Status Indicator Indicator Color TV Condition Additional Information None (indicator off) Normal TV on or standby condition. Normal operation. Yellow, steady Room temperature is too high. TV will not operate when the ambient room temperature is too high. Turn off the TV and wait until the room temperature drops.

  • Page 14: Remote Control

    Remote Control Overview Figure 1, following page 1. Slide Switch: Selects the A/V product to be ChannelView. Starts a recording when the Listings controlled by the remote control. Select TV for screen for TV Guide On Screen is displayed. NetCommand® device control. 16.

  • Page 15: Battery Installation

    Remote Control, continued 2. Load the batteries, making sure the polarities (+) and (-) are correct. For best results, insert the negative (-) side first. Figure 2. Operation: Installing the Batteries Care For Best Results from the Remote Control: • Be within 20 feet of the equipment.

  • Page 16: Tv Back Panel

    TV Back Panel COMPONENT YPbPr (480i/480p/720p/1080i) INPUT INPUT OUTPUT AUDIO RECORD Analog Audio OUTPUT OUTPUT S-VIDEO VIDEO VIDEO AUDIO- LEFT/ (MONO) AUDIO- AUDIO- LEFT/ LEFT/ (MONO) AUDIO- (MONO) RIGHT AUDIO- AUDIO- RIGHT RIGHT MONITORLINK™/HDMI PC - 60Hz VIDEO 480i/480p/720p/1080i VGA, W-VGA, AUDIO PCM LINEAR SVGA, W-SVGA, XGA, 1280 X 720...

  • Page 17: Digital Audio Output

    TV Back Panel, continued 8. DTV Link™/IEEE 139 being shown on screen. Signals from digital channels and FireWire (IEEE 1394) devices are converted to analog These jacks allow the TV to connect to external IEEE 1394 signals. There is no video signal when copy restrictions digital products by means of a single cable.

  • Page 18: Memory Card Reader

    Memory Card Reader and Front-Panel Inputs Memory Card Reader Models WD-52628, WD-62628 Figure 3 The memory card reader has four card slots that allow the display of JPEG pictures from many digital cameras and allow you to listen to MP3 or WMA audio files recorded from computers or other digital recording devices.
  • Page 19 Memory Card Reader and Front-Panel Inputs Input 3 and IEEE 139 Input/Output Figure 4 These jacks allow for convenient connection of audio/ video devices to the front of the TV. Note that if you connect to the S-VIDEO terminal, the VIDEO terminal is deactivated.

  • Page 20: System Reset Button

    Additional Information System Reset Button TV Reset Menu Read on-screen warnings before If the TV doesn’t respond to either the remote control proceeding, as some user data or or the front panel controls or will not power off, press settings may be erased. the SYSTEM RESET button on the front panel with a pointed item such as the point of a ball point pen or 1.
  • Page 21 Chapter . . . Connecting External Devices and NetCommand® Setup ....Using a CableCARD ....... . . Wall Outlet Cable .

  • Page 22: Chapter 2: Connecting

    Connecting External Devices and NetCommand Setup ® NetCommand is able to control many current audio and video devices by sending remote control signals from the TV to each device through IR emitters. Additionally, it can learn the remote control signals used by most audio video devices not already in the TV’s memory.

  • Page 23: Using A Cablecard

    Using a CableCARD Using a CableCARD CableCARD Technology After inserting a CableCARD into the TV back CableCARD is a nationwide system standard that allows panel CableCARD slot and powering On the TV, the your local cable TV provider to supply you with an access initialization process begins.

  • Page 24: Wall Outlet Cable

    Connecting a Wall Outlet Cable or Cable Box Wall Outlet Cable Standard Cable Box (can be used with a CableCARD™) (cable box, other than an HDTV cable box; this setup allows two-channel PIP) Figure 1 Figure 2 It is very important to connect the incoming cable 3 coaxial cables and one two-way RF splitter are required.

  • Page 25: Antenna With A Single Lead

    Connecting an Antenna with a Single Lead or Antennas with Separate UHF and VHF Leads Antenna with a Single Lead Antennas with Separate UHF and VHF (not for use with CableCARD™) Leads Figure 3 Figure 4 For antennas with flat twin leads A UHF/VHF combiner is required.

  • Page 26: Vcr To An Antenna Or Wall Outlet Cable (Audio & Video)

    Connecting a VCR to an Antenna or Wall Outlet Cable Connecting VCR Audio and Video to the TV VCR to an Antenna or Wall Outlet Cable (Audio & Video) Figure 5 5. Connect either an S-Video or Video cable from A two-way RF splitter, 3 coaxial cables, right and left audio VIDEO OUT on the VCR back panel to INPUT-1 cables, and an S-video or video cable are required.

  • Page 27: Vcr To A Cable Box (Audio & Video)

    Connecting a VCR to a Cable Box (Audio & Video) VCR to a Cable Box (Audio & Video) connects to the L (left) channel. If your VCR is mono Figure 6 (non-stereo), connect only the white (left) cable. A two-way RF splitter, 4 coaxial cables, right and left audio cables and an S-Video or Video cable are required.

  • Page 28: A/V Receiver (Stereo System)

    Connecting an A/V Receiver (Stereo System) Connecting a Satellite Receiver or Other Device with S -Video A/V Receiver (Stereo System) Satellite Receiver or Other Device with Figure 7 S-Video Most setups require either a digital audio cable or stereo audio Figure 8 cables.

  • Page 29: Dvd Player With Component Video

    Connecting a DVD Player with Component Video Connecting a DVI Device DVD Player with Component Video DVI Device Figure 9 Figure 10 Component video cables and audio cables are required. A DVI-to-HDMI cable or DVI/HDMI adaptor and HDMI cable and audio cables are required.

  • Page 30: Hdtv Cable Box Or Satellite Receiver With Component Video

    Connecting an HDTV Cable Box or Satellite Receiver with Component Video Connecting an HDMI Device H DTV Cable Box or Satellite Receiver HDTV Receiver to TV Back panel • Y to Y with Component Video • Pr to Pr Figure 11 •...

  • Page 31: Computer With An Hdmi Monitor Output

    Connecting a Computer with an HDMI or DVI Monitor Output Computer with a DVI Monitor Output Computer with an HDMI Monitor Figure 14 Output A DVI-to-HDMI cable or DVI/HDMI adaptor and HDMI cable and Figure 13 audio cables are required. These are not included with the TV. An HDMI-to-HDMI cable is required.

  • Page 32: Ir Emitter Netcommand

    ® Connecting the IR Emitter NetCommand IR Emitter NetCommand® • The emitter end being used can be secured in place Figure 15 using double stick tape. An IR emitter cable is included with the TV. • If you are not going to be using all emitter ends, place The emitters connected to these jacks are used by the the unused ends behind the devices so that they NetCommand system and by TV Guide On Screen®...

  • Page 33: Compatible Ieee 1394 Devices

    Connecting Compatible IEEE 139 Devices Compatible IEEE 139 Devices When Connecting IEEE 139 Devices Compatible A/V devices include some, but not all, cable • Do not loop the last device in the chain back to the boxes, D-VHS VCRs, A/V discs, and future products. It TV.
  • Page 34 Connecting Compatible IEEE 139 Devices, continued Connection Styles -Pin-Style vs. 6-Pin-Style Connectors There are two different connection styles that can be There are two different types of connectors used for IEEE used when connecting IEEE 1394 devices. Use the style 1394 terminals and cables: a 4-pin and a 6-pin style.

  • Page 35: Helpful Hints For Netcommand Connections

    Helpful Hints for NetCommand Connections Q. My VCR (or other device) does not have two sets of stereo audio outputs. How can I connect this device’s audio to both the TV and the A/V Receiver? A. Connect the single set of stereo audio outputs to the TV only. Use Edit NetCommand® to change the setup of this device.
  • Page 37 Chapter . . . NetCommand® Setup and Editing NetCommand® Introduction ......Using the Remote Control with NetCommand® .

  • Page 38: Chapter 3. Netcommand Setup And Editing

    NetCommand® Introduction NetCommand makes your TV the heart of your Home Theater NetCommand® is an intelligent control system that makes your Mitsubishi TV the heart of your home theater. With NetCommand, the TV sends signals to the other devices in the system via the IR emitters, telling the devices to play, record, change inputs, adjust volume, change channels and many more functions.

  • Page 39: Using The Remote Control With Netcommand

    Using the Remote Control with NetCommand® Below is a list of several manufacturers’ devices tested and shown to be compatible with NetCommand. These devices can be controlled without changing the setting of the remote control from TV to another product. NetCommand may be able to operate additional models, since many manufacturers use the same control signals to operate some or all of the models they offer.

  • Page 40: Netcommand® Setup On-Screen Buttons

    NetCommand® Setup On-Screen Buttons To use the TV’s NetCommand feature, you need to provide some detailed information during the setup of your Mitsubishi TV. You must define the manufacturer of the devices that are connected to the television, or learn the IR code remote control signals for the device connected.

  • Page 41: Graphical Menu System

    3D Graphical Menu System Your TV also has Mitsubishi’s exclusive 3D Graphical on-screen operating system, which provides on-screen information for menu choices and changes, using the TV’s remote control. Menu Screens Remote Control Buttons A picture (icon) is highlighted on the menu The following buttons on your remote control help you screen when selected with the ADJUST navigate within the...

  • Page 42: Netcommand® Initial Setup

    NetCommand® Initial Setup The initial setup screens that appear when you first power Select Next> and press ENTER to start the initial on your new Mitsubishi TV guide you through setup of setup. NetCommand and the TV Guide On Screen® system. If the NetCommand Setup is cancelled before it’s Most IR remote control signal formats can be learned by completed, you can restart the NetCommand setup...

  • Page 43: Device Setup Screen

    NetCommand ® Initial Setup, continued Device Setup Screen TV Guide On Screen® System Setup Figure 4 Figure 5 If the devices connected to the TV are already in The TV Guide On Screen option allows you to select NetCommand memory, you can quickly select them whether you want to enable the TV Guide On Screen at this screen.

  • Page 44: Finish Screen

    NetCommand ® Initial Setup, continued Finish Screen Review Screen Figure 7 Figure 6 To complete the NetCommand setup, select Finish After you have made your device choices, the Review from the Finish screen. Screen will display. It is important to review the settings to ensure that they are correct.

  • Page 45: Edit Netcommand®: Add An A/V Receiver

    Edit NetCommand®: Add an A/V Receiver A/V Receiver Screen Figure 8 • Select “Other,” skip Learn and select Next>. This If your A/V Receiver manufacturer was not listed, and you will allow the device to appear and will allow selected “None” during the initial NetCommand setup, NetCommand to switch inputs to use this device.
  • Page 46 Edit NetCommand®: Add an A/V Receiver, continued A/V Receiver (AVR) Input Learn Screen A/V Receiver (AVR) Learn Screen Figure 10 Figure 11 NetCommand can now learn the remote control signals 1. Press ADJUST on the TV remote to select the used to select each input on the A/V receiver.
  • Page 47 Edit NetCommand®: Add an A/V Receiver, continued Name Screen Finish Screen Figure 12 Figure 14 The Name screen allows you to change the default name To finalize your selections and complete the A/V for the A/V receiver to a custom name of up to eight receiver setup, select Finish from the Finish screen.

  • Page 48: Edit Netcommand®: Add Devices

    Edit NetCommand®: Add Devices Mitsubishi’s NetCommand allows you to edit your home theater configuration. You can add new devices, change device settings and connections, delete devices and learn remote control IR signals not already in NetCommand memory. Add Screen Edit NetCommand Screen Figure 16 Figure 15 Select “Add”...
  • Page 49 Edit NetCommand®: Add Devices, continued [Device] Screen • Select “Other”, skip Learn and select Next>. This will allow the device to appear and will allow Figure 17 NetCommand to switch inputs to use this device. If you selected “None” for a device type during initial However, NetCommand will not be able to control setup, you can later add a device with this screen.
  • Page 50 Edit NetCommand®: Add Devices, continued to delete the current letter and move back one character position. When in the first position, the CANCEL button will return the name to the default name. Figure 18. [Device] Learn screen Figure 20. Name screen [Device] Advanced Learn Screen Figure 19 After learning the basic device keys, the [Device]...

  • Page 51: Vcr For Recordings Screen

    Edit NetCommand®: Add Devices, continued The screens described below may not be necessary for your device setup. If they do not display automatically on screen, they are not required. VCR for Recordings Screen Figure 22 Select the VCR to use for making analog recordings through NetCommand or the TV Guide On Screen®...

  • Page 52: Edit Netcommand®: Change Or Delete Devices

    Edit NetCommand®: Change or Delete Devices Change Device Screen Finish Screen Figure 25 Figure 27 Selecting Change from the Setup menu screen displays To finalize your selections and complete the NetCommand the Change screen. To change a device, select the setup, select Finish from the Finish screen.

  • Page 53: Ieee 1394 Devices And Netcommand® Control

    IEEE 139 Devices and NetCommand® Control See pages 33 and 34 for information regarding compatible IEEE 1394 devices and connection styles. The TV is not able to control IEEE 1394 devices that use other types of control protocols. Incompatible digital audio, video and/or control information will still be able to pass from one device through the TV to another device on the network.

  • Page 54: Adding Ieee 1394 Devices Automatically

    Adding IEEE 139 Devices Automatically Adding IEEE 139 Devices Name for 139 Device Screen Automatically Figure 29 If you choose to add the discovered IEEE 1394 device, Addition of IEEE 1394 devices is a special case of the Name for 1394 Device screen appears. Enter a new NetCommand setup because the devices are detected name for the device or use the default name that appears automatically.

  • Page 55: Connection Screen

    Adding IEEE 139 Devices Automatically, continued IEEE 139 Device Type Screen Connection Screen Figures 30 and 31 Figure 32 If the new IEEE 1394 device is also connected using Select the TV input that you used when you connected analog inputs, you will need to define the device type. the video or S-Video cables.
  • Page 57 Chapter . . . NetCommand® Functions Device Selection Menu ....... Using the Device Menu Button to Display Menus .

  • Page 58: Chapter 4. Netcommand Functions

    Device Selection Menu When you press DEVICE on the TV’s remote control, the Device Selection menu (Figure 1) displays. If NetCommand® has not been set up, the Device Selection menu allows you to select an input for viewing. If NetCommand is set up, the Device Selection menu allows you to select the device for viewing, select audio from the TV speakers or A/V receiver, power compatible devices On or Off, and verify the destination of signals.

  • Page 59: Using The Device Menu Button To Display Menus

    Using the Device Menu Button to Display Menus Device Menu screen shown is an example of the type of screen that If the input is a VCR or DVD, and NetCommand is set up, may display. Specific screen menus are sent by your press DEVICE MENU once to display the transport menu cable provider.

  • Page 60: Using The Guide Button To Display Channelview™ And Menus

    Using the GUIDE Button to Display ChannelView™ and Menus The GUIDE Button Please refer to the separate TV Guide On Screen® User’s Guide for details about using the GUIDE button with TV Guide On Screen. When you are not using the GUIDE for the TV Guide screens, pressing GUIDE allows you to see NetCommand®...

  • Page 61: Netcommand®-Controlled Recordings

    NetCommand®-Controlled Recordings Setting up Recordings Record List Figure 7 Figure 8 Through NetCommand, you can automatically start and Press GUIDE while viewing the Record To screen to see a stop recordings and send signals from one playback list of all currently programmed recordings. A maximum device to a recording device.
  • Page 62 NetCommand®-Controlled Recordings, continued Copy-Protected Material When attempting to record copy-protected material, the Record functions of the NetCommand and IEEE 1394 systems may be prevented or stopped. If you have a recording that is tagged “Record Once,” NetCommand will change the tag to “Record No More.” Restrictions for Traditional VCRs •...

  • Page 63: Peer-To-Peer Connections

    Peer-to-Peer Connections What is a Peer-to-Peer Connection? 2. Press RECORD or CONNECT on the TV remote control to open the Recording Setup screen. Figure 9 A peer-to-peer connection allows the IEEE 1394 devices 3. In the “Record To” section of the Recording Setup in your TV network to talk to each other without the further screen, review the destination device and duration of need of TV intervention once the peer-to-peer connection...

  • Page 64: Using A/V Discs

    Using A/V Discs A/V Disc Search Using the Remote Control with an A/V NetCommand is able to search to a specific time in a Disc after Selecting It from the Device recording on an IEEE 1394 A/V Disc. Selection Menu: Start the desired track’s playback on the A/V disc.
  • Page 65 Chapter . . . TV Menu Operations Main Menu ........Setup Menu .

  • Page 66: Chapter 5: Tv Menu Operations

    Main Menu Channel Menu Setup Menu Figure 4 Figure 1 Edit channels for ANT-1 and ANT-2. After memorization, Use the Setup menu to select English or Spanish as if a channel displays as digital and analog, you can the language for the menus and on-screen displays. choose to see the channel digitally every time it is Memorize the available channels for antennas or cable selected.

  • Page 67: Setup Menu

    Setup Menu Setup Menu Figure 8 After memorizing channels, the channels in memory can be accessed in ascending or descending order by pressing CH . Select the Channel Menu to access further channel-editing features, such as channel add or delete, channel name, and SQV custom favorite channel memories.

  • Page 68: Software Version

    Setup Menu, continued Time Zone Fri (Monday through Friday), or the individual days of the Select your correct time zone. Press ADJUST week. select the time zone (Atlantic, Eastern, Central, Mountain, Set Time Pacific, Alaska or Hawaii) for your area. Then press Press ADJUST repeatedly to slowly select the hour or ADJUST to move to the Daylight Savings time option.

  • Page 69: Netcommand® Menu

    NetCommand® Menu Transport Menu NetCommand Menu Figure 11 Figure 13 Figure 13. Transport Menu NetCommand uses the Transport menu to control VCRs, DVDs, IEEE 1394 A/V Discs, digital VCRs, and similar devices. If you choose to turn off this menu when viewing the devices, the transport buttons (rewind, play forward, stop, pause and record) on the TV’s remote control will continue to operate these devices.

  • Page 70: Record Menu

    Record Menu Record You cannot record from an analog channel or device or a VHS or S-VHS VCR to a digital recording device such as Figure 14 a DVCR or A/V Disc. The Record menu allows you to set up recordings, view the record list, and set defaults for your recording devices.

  • Page 71: Record List

    Record Menu, continued Record List A digital recording can be made on either a digital or analog device. For best playback quality, however, Figure 16 To see a list of all currently programmed recordings, select record digital programs on a digital recording device. the record list option on the Record menu or press GUIDE Not that analog recordings can only be made on the one while viewing the Recording setup screen.

  • Page 72: Channel Menu

    Channel Menu Channel Memory Figure 17 After the available channels have been memorized with Memorize Channels on the Setup menu, weaker channels can be added or unwanted channels can also be deleted. Press CH on the remote control to see the channels in memory.

  • Page 73: Signal Strength

    Channel Menu, continued SQV (SuperQuickView™) Removing SQV channels using the remote control: Using The Menu Screen Press the SQV button and then the memory bank Figure 17 number. SQV (SuperQuickView™) allows you to put together lists of your favorite channels from Antenna 1 and Antenna 2.

  • Page 74: Captions Menu

    Captions Menu Background Captions Menu To make the analog closed captions easier to read, you Figure 18 For analog channels, broadcasters can send either can choose to display the background color as either Standard or Text closed captioning. Standard Closed black or gray behind the captions.
  • Page 75 Captions Menu, continued Fonts Opacity (Font) You can customize the text of digital captions by You can customize the visibility of your fonts using the selecting the font of your choice. The available font following categories: options are as follows: •...

  • Page 76: V-Chip Lock Menu

    V-Chip Lock Menu V-Chip Lock Menu Overview IMPORTANT Figure 20 If you forget your four-digit pass code, see The V-Chip Lock menu gives you access to three different Appendix C. types of TV locks. You must use a pass code to open this menu to enable/disable the lock options.

  • Page 77: Lock By Time

    V-Chip Lock Menu, continued Lock by Time 6. Press ADJUST to move to the Programs Not Rated box. Press ENTER to add or delete a check mark to Lock by Time allows you to entirely block use of the TV allow or block programs that are not rated.
  • Page 78 V-Chip Ratings V-Chip Signal Information When provided by the broadcaster, V-Chip ratings can be used to control which programs can be viewed or will be blocked. When V-Chip ratings are sent, you will see the ratings when you change the channel or when you press the INFO button on the remote control.

  • Page 79: Audio/Video Menu

    Audio/Video Menu Audio/Video When the original video was filmed on 30-frame-per- second cameras, the Auto setting automatically applies Figure 23 video decoding, the same as used with the Off setting. Film Mode is not effective for high-definition signals. TV Speakers When an A/V receiver has not been set up in NetCommand, this selection will turn the TV’s internal speakers on or off.

  • Page 80: Audio Settings

    Audio Settings NOTE: The effects of the audio settings of Bass, Treble, Balance and Surround affect the sound heard through the TV speakers only. be related to the program you are watching, Analog and Digital Audio Settings (such as a sound track in a foreign language), or A slider displays on screen for most settings.

  • Page 81: Video Settings

    Video Settings Video Settings adjusting. Each TV input or device has a memory for PerfectColor. While using the PerfectColor option, Press the VIDEO key repeatedly to cycle through the press CANCEL if you want to reset the colors to the Video options to the one you want to change.
  • Page 83 Chapter . . . Additional Features MediaCommand™ and Memory Card Playback ....Operation of PIP and POP ......TV Display Formats .

  • Page 84: Chapter 6: Additional Features

    MediaCommand™ and Memory Card Playback Warning: Some memory cards available on the market are not properly certified to follow the card type specifications noted below and cannot be used by the card reader. If you experience problems with the reading of your file, please transfer your files to a properly certified card. Memory Card Slots Remote Control Buttons for Controlling the Playback Inserting a memory card...
  • Page 85 Media Command™ and Memory Card Playback, continued For MP3 or WMA7 Playlist Menu: NOTES Figure 3 • During WMA7 audio playback, audio from the cards is sent to the A/V receiver as analog audio. Digital out 1. Press GUIDE to display the Playlist menu. is not available.

  • Page 86: Operation Of Pip And Pop

    Operation of PIP and POP You can display programs from analog channels, analog inputs, or analog devices as picture-in-picture (PIP) and picture-outside-picture (POP). The TV has a second analog tuner for non-scrambled analog channels received on ANT-1 and displays them as the PIP/POP sub-pictures. Digital channels and devices can be shown as the main picture but cannot be the sub-picture.

  • Page 87: Tv Display Formats

    TV Display Formats This is a widescreen TV, also known as a 16:9 TV. This shape reflects the new types of images available from HDTV and many DVDs. There are still many older style narrow-screen images (called 4:3 aspect ratio) you will encounter. While there will never be a perfect solution for displaying a narrow image on a wide screen, Mitsubishi offers several display formats from which to choose.
  • Page 88 TV Display Formats Chapter 6. Additional Features...

  • Page 89: Pc Viewing

    PC Viewing Figure 1 To display your PC screen on the TV, first connect 5. Depending on your PC, adjust the resolution with the PC to the HDMI 2 input on the TV’s back panel either: (see Chapter 2). You must then activate the PC •...

  • Page 90: Pc Display Formats

    PC Display Formats Signal Format 16 X 9 Standard  X 3 Standard Original Pixel Counts 640 X 480 1696 X 960 1280 X 960 WVGA 848 X 480 1696 X 960 1280 X 960 SVGA 800 X 600 1702 X 960 1280 X 960 WSVGA 1064 X 600...
  • Page 91 Chapter . . . Troubleshooting...
  • Page 92 General TV Operation Symptom Suggested Solution The TV remote control does not work. • Check that the batteries are installed correctly. • Check that the selected switch is set to “TV.” • Be no more than 20 feet from the TV when using the remote control. •...
  • Page 93 General TV Operation Symptom Suggested Solution A device does not respond to button presses • Remote has not been set up for NetCommand® use. from the remote. • The incorrect manufacturer was selected during setup. Select the Change setting from the Setup menu and then the device to display the manufacturer selection. Change if necessary.
  • Page 94 General TV Operation Symptom Suggested Solution The message “Lamp will soon exceed...” keeps Reset the lamp reminder in the setup menu. displaying after the lamp has been replaced. NetCommand unable to learn specific device • Device does not use IR format for remote control signal. ITT and RF formats keys.
  • Page 95 Sound Symptom Suggested Solution There is no sound even when the volume is • Check audio source in Device Menu. turned up. • Check to see if the MUTE button is on. • The TV’s “Listen to:” setting may be set to SAP. •...

  • Page 96: Chapter 7: Troubleshooting

    IEEE 139 Devices Symptom Suggested Solution Excessive digital artifacts when viewing an IEEE • The IEEE 1394 cable is too long; 15 feet between devices is the maximum. 1394 device. • There may be a slow device in the middle of the IEEE 1394 network. Move the slow devices to the end so that connections for faster devices do not pass through them.
  • Page 97 IEEE 139 Devices Symptom Suggested Solution Cannot record to or from the IEEE 1394 device, • To initiate a recording to IEEE 1394 device, press the REC key. The Record menu including dubbed recordings. displays allowing setup of the recording. •...

  • Page 99: Appendices

    Appendices Appendix A: Specifications ......Appendix B: On-Screen Information Displays ....Appendix C: Bypassing the V-Chip Lock .

  • Page 100: Appendix A: Specifications

    TV Specifications Projection System DLP, 0.843” chip, 1920 x 1080 pixels with Smooth Picture™ Lamp WD-52628, WD-62628: 120-watt VIP type WD-73727: 150-watt VIP type Channel Frequency Reception Over-the-Air: VHF 2–13, UHF 14–69 Analog Cable: 1–125 Digital Cable: 1–135...
  • Page 101 (1 front, 2 rear) Audio/Speakers Qty. 2 woofers 5.5" x 2.2"; Qty. 2 Tweeters 1.5" round Dimensions: WD-52628 34" H x 49.6 " W x 18.6 " D, 121 lbs. WD-62628 40.5" H x 58.3" W x 19.9" D, 133 lbs.

  • Page 102: Appendix B: On-Screen Information Displays

    Appendix B: On-Screen Information Displays When you turn on the TV, change devices, change channels, or when you press the INFO button on the remote control, the TV will display the current status. Below are the most common displays. Please note that seldom or never do all of the different status indicators appear at the same time. Analog Program 1.

  • Page 103: Appendix C: Bypassing The V-Chip Lock

    Appendix C: Bypassing the V- Chip Lock Bypassing the V-Chip Lock After you set the lock, you need your pass code to view a V-Chip locked program, view the locked TV, cancel the lock, or enter the V-Chip Lock menus. If you forget your pass code, you can view the locked TV without entering your pass code.
  • Page 104 This page intentionally blank Appendices...

  • Page 105: Appendix D: Remote Control Programming Codes

    Appendix D: Remote Control Programming Codes A/V Receivers IMPORTANT A/V Receiver Brand Code The remote control may return to its MITSUBISHI 010, 011, 012, 013, 014 AIWA 225, 226, 241 initial setting when the batteries are BOSE changed. You may need to reprogram. B &...
  • Page 106 Appendix D: Remote Control Programming Codes, continued Cable Boxes, continued VCRs SCIENTIFIC ATLANTA 112, 113, 194 VCR Brand Code SIGNATURE 119,124,125,126,127,120,121,122 MITSUBISHI 001, 060, 067, 068, 061, 062, 002 SLMARK 105,101 AKAI 049, 034, 035, 036 SPRUCER AUDIO DYNAMIC STARCOM 119,124,125,126,127,120,121,122 BELL &...
  • Page 107 Appendix D: Remote Control Programming Codes, continued When your remote control has been programmed to operate another manufacturer’s product, the function performed on each layer can vary. The most common IMPORTANT functions are: Some manufacturers may change their products, or they may use more than one remote control system.

  • Page 108: Appendix E: Device Control With Netcommand

    Appendix E: Device Control with NetCommand® NetCommand Compatible Traditional Devices (Analog) When Device Selection Menu is Displayed and the Device is Highlighted (Yellow Outline) A/V RECEIVER CABLE BOX/SAT Device Remote Control Button POWER Power On/Off Power On/Off Power On/Off Power On/Off (toggle) (toggle) (toggle)
  • Page 109 Appendix E: Device Control with NetCommand®, continued IEEE 139 Devices When Device Selection Menu is Displayed and the Device is Highlighted (Yellow Outline) TUNER/ A/V DISC DVCR AMPLIFIER Device CABLE BOX/ Remote Control Button POWER Power On/Off Power On/Off Power On/Off Power On/Off (toggle) (toggle)

  • Page 110: Appendix F: Netcommand® Specialized Device Keys

    Appendix F: NetCommand® Specialized Device Keys CABLE LEARNING SCREEN FUNCTION NAME ON TV REMOTE RECEIVER or SAT CHECK BOX NAME Power* Power On or Power On/Off POWER** Power (Off)* Power Off POWER** Volume Up Volume Up Volume Down Volume Down Mute Mute MUTE...

  • Page 111: Appendix G: Cleaning And Service

    Appendix G: Cleaning and Service IMPORTANT DO NOT use any kind of abrasive cleaner on the surface of the TV screen. Cleaning Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is needed, please use the following guidelines: First, turn off the TV and unplug the power cord from the power outlet.

  • Page 112: Appendix H: Lamp Cartridge Replacement

    Call (800) 553-7278. Order a new lamp for your TV model as shown below. TV Model Number Lamp Part Number Call (800) 332-2119. Please have model number, serial number, and TV purchase date available. WD-52628 915P026010 WD-62628 WD-73727 915P027010 WARNING: Do not remove the lamp cartridge immediately after turning off the television.
  • Page 113 Appendix H: Lamp Cartridge Replacement, continued WARNING THE GRILLE/COVER IS PROVIDED WITH AN INTERLOCK TO REDUCE THE RISK OF EXCESSIVE ULTRAVIOLET RADIATION. DO NOT DEFEAT ITS PURPOSE OR ATTEMPT TO SERVICE THE TV WITHOUT REMOVING THE GRILLE/COVER COMPLETELY. 1. Turn TV power off and allow the lamp to cool at least one hour before proceeding.

  • Page 114: Appendix I: Recording And Viewing Combinations

    Appendix I: Recording and Viewing Combinations The tables in this appendix show which program sources you can watch while a recording is in progress. Analog VCR Connected to Audio and Video Record Outputs You can watch any one of these (viewing device) When recording this Different Same as...
  • Page 115 Appendix I: Recording and Viewing Combinations Appendices...

  • Page 116: Trademark And License Information

    Trademark and License Information LICENSOR’S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

  • Page 117: Mitsubishi Tv Software

    MITSUBISHI TV SOFTWARE END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics America, Inc. (MDEA) for all software pre installed and/or provided along with this television (“Software”).

  • Page 118: Mitsubishi Dlp™ Projection Television Limited Warranty

    Mitsubishi DLP™ Projection Television Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this television from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of against defects arising from improper workmanship and/or material: a.
  • Page 119 d. To obtain a replacement lamp during the warranty period, please contact the MDEA Consumer Relations Department at (800) 332-2119. After the warranty period you may order the lamp directly from the MDEA Parts Department at (800) 553-7278. 2. THIS LIMITED WARRANTY DOES NOT COVER: a.

  • Page 120: Index

    Index Inputs (Audio/Video) 16 A/V Memory Reset. See Reset IR (Infrared) Date. See Clock A/V Receiver IR Code for [Device] Screen 51 Daylight Savings Time 68 Adding 45 IR Emitter NetCommand® 16, Demo Mode 20 Connecting 28 Device Menu 59 Inputs 45 Device Selection Menu 58 Input Learn Screen 46...
  • Page 121 Device Setup Screen 43 Reset VCR 14, 16, 33, 54, 55, 58, 60, 94 Edit NetCommand Screen 48 A/V (all settings) 13 and NetCommand Control 108, Initial Setup 42 A/V Memory (for individual de- NetCommand Menu 69 vices) 79 Connecting 26, 27 Pre-Memorized Devices 39 DVCR Counter 109 NetCommand Default Input 22...
  • Page 124 Website: www.mitsubishi-tv.com E-mail: MDEAservice@mdea.com To order replacement or additional remote controls, lamp cartridges, or Owner’s Guides, call 800-553-7278 For questions, call Consumer Relations at 800-332-2119 © 2005 Mitsubishi Digital Electronics America, Inc. Written and Printed in U.S.A. 853B540B30...

This manual is also suitable for:

Wd-62628Wd-73727

Table of Contents