Black Level Adjustment - NEC PA622U User Manual
Hide thumbs
Also See for PA622U:
- User manual (293 pages) ,
- Installation manual (11 pages) ,
- Quick setup manual (6 pages)
Table of Contents
Advertisement
Black Level Adjustment
This adjusts the black level of the overlapping area and the non-overlapping area of the multi-screen (EDGE BLEND-
ING).
Adjust the brightness level if you feel the difference is too large.
NOTE:
This function is enabled only when [MODE] is turned on.
Adjustable area varies depending on what combination of [TOP], [BOTTOM], [LEFT] and [RIGHT] are turned on.
Example: Adjusting the Black Level when placing two projectors side by side
Adjust [CENTER]
Adjust [CENTER-RIGHT]
1. Turn on [MODE]
2. Select [BLACK LEVEL] and press the ENTER button.
The screen will switch to the black level adjustment screen.
3. Use the ▼ or ▲ button to select an item and use the ◀ or ▶ to adjust the black level.
Do this for the other projector if necessary.
Width of overlap
Projector A's
Projector B's
image
image
60
4. Multi-Screen Projection
Adjust [CENTER]
Adjust [CENTER-LEFT]
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
