Page 2
European Union legislation shall waste. Instead it shall be handed over to the applicable be addressed to the authorized representative, Sony collection point for the recycling of electrical and Deutschland GmbH, Hedelfinger Strasse 61, 70327 electronic equipment.
Region code Control Menu Display Your player has a region code printed on the back of the unit and only will play commercial DVDs labelled with an identical region cord or Press DISPLAY. Copyrights, trademarks and software license To change the Control Menu display, press information DISPLAY again.
PLAYER t: Enter your 4-digit password, then MEDIA press ENTER. Select the level in “LEVEL.” The Selects the media type you want to play. lower the value, the stricter the limitation. Select VIDEO: Plays video files. an area in “STANDARD.” When you select PHOTO (MUSIC): Plays photo and music files “OTHERS t,”...
LINE: Selects video signals output. Specifications CUSTOM SETUP AUTO STANDBY: Sets the Auto Standby System setting on or off. If you select “ON,” the player Laser: Semiconductor laser enters standby mode when left in stop mode for more than 30 minutes. Inputs/Outputs AUTO PLAY: When set to “ON,”...
While holding down TV [/1, press the number buttons to select your TV’s Note about recordable media manufacturer’s code. Some recordable media cannot be played on Sony 01 Panasonic 17, 49 this player due to the recording quality or Goldstar 76 Philips 06, 08, 72...
Should any problem persist, consult your nearest Sony dealer. The power is not turned on. c Check that the power cord (mains lead) is connected securely.