Table of Contents
Advertisement
© Copyright 2014 LG Electronics U.S.A., Inc.
Lodging Guest Interactive Pro:Centric
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
32LY750H
42LY750H
39LY750H
47LY750H
55LY750H
EXPERIENCED INSTALLER
EZ-Manager Wizard
pages 12 – 19
Custom Master TV Setup
pages 32 – 35
FTG Mode of Operation
pages 42 – 48
P/N: 206-4263 (Rev A)
®
TVs
Advertisement
Table of Contents
Troubleshooting
Related Manuals for LG Centric X950 Series
Summary of Contents for LG Centric X950 Series
- Page 1 Note: Selected features shown in this guide may not be available on all models. EXPERIENCED INSTALLER EZ-Manager Wizard pages 12 – 19 Custom Master TV Setup pages 32 – 35 FTG Mode of Operation pages 42 – 48 P/N: 206-4263 (Rev A) © Copyright 2014 LG Electronics U.S.A., Inc.
-
Page 2: Safety Warnings
• Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 17. Power Cord Caution: It is recommended that appliances be placed Keep these instructions. upon a dedicated circuit; that is, a single outlet circuit Heed all warnings. which powers only that appliance and has no additional outlets or branch circuits. - Page 4 IMPORTANT SAFETY INSTRUCTIONS 26. Do not touch the ventilation openings, as they may become (Continued from previous page) hot while the TV is operating. 22. Outdoor Antenna Grounding 27. If you smell smoke or other odors coming from the TV or If an outside antenna or cable system is connected to the hear strange sounds, unplug the power cord, and contact an product, follow the precautions below.
-
Page 5: Table Of Contents
Upgrading TV/PTC Software using a USB Memory LG Smart Install Utility......20 – 21 Device......... 62 Before You Begin . -
Page 6: Commercial Mode Overview
TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides in the TV’s CPU or Protocol Translator Card (PTC) or it resides externally from the TV (i.e., in a device from the solution provider). -
Page 7: Ftg Mode
Commercial Mode Overview (Cont.) Installer Menu To create a Master TV Setup, you will need to know how to access the commercial controller (PTC) Installer Menu xxLY750H PTC INSTALLER MENU and make changes to the default values as required. If CPU-CTV necessary, familiarize yourself with the Installer Menu and how to make and save changes. - Page 8 • TV Zoning and Wi-Fi Zoning options for location-specific configuration. LG’s FTG File Manager PC software enables you to create an FTG Configuration (.tlx) file, which may be used to configure the CPU for FTG Mode. FTG File Manager utilities enable you to create/edit an FTG Channel Map and configure Installer Menu settings.
-
Page 9: Determining The Tv Operating Mode
Commercial Mode Overview (Cont.) Determining the TV Operating Mode To determine the operating mode of the TV, press MENU SETTINGS on the Installer Remote. The menu displayed depends on the operating mode. See examples below. If the Function Menu appears, the TV is in a mode (FTG, PPV, etc.) that does not allow the end user to change the fundamental TV setup. -
Page 10: Pro:centric Operation
Pro:Centric Interactive Menu Navigation An LG Pro:Centric-capable TV remote control provides access to both interactive menus and regular TV features. Press PORTAL on the remote to access the interactive menus. Note: Interactive menu options may vary, depending on Pro:Centric features enabled for the site. The following are default interactive menus. -
Page 11: Pro:centric Setup
Pro:Centric Operation (Cont.) Pro:Centric Setup Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide. This document describes only those settings that must be specified on the TVs to enable Pro:Centric remote management and/or the Pro:Centric application. •... -
Page 12: Ez-Manager Wizard
Welcome screen) to use the LG Smart Install utility to perform USB configuration functions. Any file(s) you wish to use for configuration purposes must be stored in a folder named “LGSMARTINSTALL” in the root directory of the USB memory device. See “LG Smart Install Utility” on pages 20 to 21 for further information. -
Page 13: Initiate Configuration Or Exit The Ez-Manager Wizard
“Exit” option from the subsequent screen(s). Note: As indicated on the previous page, you may use the LG Smart Install feature to configure the TV using a USB memory device at any time while the EZ-Manager Wizard is in progress. -
Page 14: Tv Configuration Options
18 to 19 for further information. Note: If you have already inserted a USB memory device with the intent to use the LG Smart Install utility and the Integrated USB Downloading screen is on display, you may still set the Zoning features on this TV by selecting Previous to return to the EZ-Manager/TV Configuration Options screen. - Page 15 Menu to complete the configuration, continue to “USB Configuration” on pages 18 to 19. • If you wish to use a USB memory device in conjunction with the LG Smart Install utility to complete the configuration, see “LG Smart Install Utility” on pages 20 to 21.
-
Page 16: Configure Pro:centric Settings
EZ-Manager Wizard (Cont.) Configure Pro:Centric Settings Once you select “Next” from the TV Configuration Options screen, EZ-Manager Wizard the Searching for Pro:Centric Server screen is displayed (see example at right), and you have the following options: Searching for Pro:Centric Server... •... - Page 17 EZ-Manager Wizard (Cont.) Manual Pro:Centric Configuration 1. With the Searching for Pro:Centric Server screen on display, EZ-Manager Wizard use the arrow keys on the Installer Remote to select/highlight the Manual Pro:Centric option at the bottom right of the Searching for Pro:Centric Server... screen, and press OK.
-
Page 18: Usb Configuration
EZ-Manager Wizard (Cont.) (Continued from previous page) 4. Once all fields are completed as required, you have two EZ-Manager Wizard options (see also note below): • To save the data entered and exit the wizard, use the arrow Pro:Centric Manual Configuration Are you sure you want to exit the wizard? keys to select Exit and then press OK. -
Page 19: Ez-Manager Wizard
EZ-Manager Wizard (Cont.) The procedure below assumes that the desired file(s) is/are already loaded onto the USB device. For further information on USB Download Menu functions and file requirements, and/or for information on creating configuration files, refer to the appropriate section(s) in this document. Before You Begin •... -
Page 20: Lg Smart Install Utility
LG Smart Install Utility The LG Smart Install utility enables you to select multiple files at one time from the files loaded on a USB memory device. You may use this utility to download any one or all of the following to a TV: a TLX file for configuration purposes, a TV or PTC software update, a splash screen image. -
Page 21: Lg Smart Install Utility
Downloading Data... Warning - Do not remove the USB device during this process Note: Use the arrow keys on the Installer Remote to select Previous and press OK, as necessary, to exit the LG Smart Maintenance File Complete File Name : xxLY750H-UA00001.TLX... -
Page 22: Installer Menu
Installer Menu descriptions in this document if you are configuring the TV using an FTG Configuration (.tlx) file created using LG’s FTG File Manager software. Refer to the table on pages 24 and 25 for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. -
Page 23: Using The Installer Menu
Installer Menu (Cont.) As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indicate the TV’s current configuration mode. The table below lists all possible mode identifiers for these TV models. Acronym Description CPU-CTV Pass-through Mode with Channel Map in CPU CPU-FTG FTG Mode via CPU... - Page 24 Installer Menu (Cont.) Installer Menu Items 000 through 071 Item Function Value Range Default Value Brief Description of Function INSTALLER SEQ 0 ~ 3 Leave default set to 0. POWER MANAGE 0 ~ 7 Sets number of hours of no activity before automatic shutoff. Set to 1 to enable TV to turn ON when AC power is applied.
- Page 25 Installer Menu (Cont.) Installer Menu Items 073 through 122 Item Function Value Range Default Value Brief Description of Function If set to 1 and item 028 CH. OVERIDE is set to 0, a “CHANNEL NOT CH NOT AVBLE 0 / 1 AVAILABLE”...
- Page 26 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE 004 - STRT CHANNEL (Start Channel) Specifies entry sequence to the Installer Menu. If active, this function allows you to determine the initial Major Start Channel number when the TV is turned ON. This feature is 0 = 9876 1 = 4321 useful for an in-house information channel, since the TV would...
- Page 27 Installer Menu (Cont.) 008 - MIN VOLUME (Minimum Volume) 020 - FEATURE LEVEL This function determines the minimum volume level allowable Determines an additional IR code scheme to which the TV will with the Volume (VOL) Up/Down control. In this way, for example, respond, allowing for the use of unique IR codes based on “bed someone cannot set the volume too low to hear.
- Page 28 Installer Menu (Cont.) 030 - ACK MASK 046 - STRT AUX SRCE (Start Aux Source) MPI Communication Parameter. When set to 1, enables ACK Sets the starting Aux source. When turned ON, the TV will tune to feature of MPI. starting Aux source if item 004 STRT CHANNEL is set to 0.
- Page 29 Installer Menu (Cont.) 078 - UPN MSB (UPN Most Significant Byte) 091 - HDMI2 ENABLE User programmable number, most significant byte readable by Set to 1 to enable HDMI 2 input in DTV Mode. Set to 2 to enable MPI command. Note: Not linked to serial number. HDMI 2 input in PC Mode.
- Page 30 Installer Menu (Cont.) 096 - DEF. ASP. RATIO (Default Aspect Ratio) 099 - BACK LIGHTING Selects default aspect ratio at power up: Sets the TV screen brightness at power up. Default setting is 255. • 0 = Set By System 1 = 4:3 1 (dimmest picture) –...
- Page 31 Installer Menu (Cont.) 117 - FACT DEFAULT (Factory Default) Under standard TV OFF/ON operating conditions (i.e., item 002 AC Set to 1 and press OK to restore the factory default settings of all ON is set to 0), a Wake For Update event occurs when the TV is Installer Menu items.
-
Page 32: Custom Master Tv Setup
Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. Note: Cloning requirements and procedures are described in detail on pages 37 to 41. Refer to FTG Mode information on pages 42 to 48 for details on entering FTG Mode and configuring/editing the FTG Channel Map and FTG Installer Menu settings. -
Page 33: Custom Master Tv Setup Procedure
Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. Turn ON the TV. The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the TV: • If the wizard is displayed, the TV is in the required factory default state. Exit the wizard, and then continue with step 2. - Page 34 Custom Master TV Setup (Cont.) (Continued from previous page) 3. Set up TV features. On-screen setup menus control the features of the TV. Press MENU SETTINGS on the Installer Remote to access the TV setup menus, and then set Channel, Picture, Audio, Time, etc. options to the desired PICTURE AUDIO CHANNEL...
- Page 35 Custom Master TV Setup (Cont.) (Continued from previous page) 5. (PTC cloning only) Transfer the auto-tuned/edited channel lineup (if applicable) and TV setup menu settings to the PTC: 2-5-5 + MENU Mode Note: This step is essential for successful cloning using a TLL file. Without this step, the PTC will not contain any channels or TV setup menu settings.
-
Page 36: Channel Icons / Custom Text Labels (2-5-4 + Menu Mode)
Channel Icons / Custom Text Labels (2-5-4 + MENU Mode) Changing Channel Icons and/or Adding or Editing Changing icons and/or adding or editing custom text labels Custom Text Labels in the Channel-Time Display can only be done if there are channels that have been transferred to the TV’s PTC either during Master TV Setup If there is no pre-assigned icon for a channel, you can add (see pages 32 to 35) or by cloning (TLL file only). -
Page 37: Cloning Procedures
Cloning Procedures Cloning Overview Cloning refers to the process of capturing a Master TV Setup and transferring it to a Target TV that is to remain in Pass-through Mode. There are two different procedures for cloning a Master TV Setup, each with its own advantages and limitations (see also “Cloning Methods” on page 32): •... - Page 38 Note: If desired, you can complete the Teaching process via the EZ- Manager Wizard (see “USB Configuration” on pages 18 to 19) or using the LG Smart Install utility (see “LG Smart Install Utility” on pages 20 to 21). (Continued on next page)
- Page 39 Cloning Procedures (Cont.) (Continued from previous page) 3. If the Master TV Setup contains a TV Zone # and/or a Wi-Fi Zone # assignment, make sure to assign the same Zone designation(s) in the USB Download Menu Target TV at this time. See Reference section, “Using the TV’s Zoning Upgrade TV Software Features,”...
-
Page 40: Learning / Teaching A Master Tv Setup Using A Tll File
Cloning Procedures (Cont.) Learning / Teaching a Master TV Setup using a TLL File This section describes how to Learn and/or Teach a Master TV Setup using a TLL file. Before You Begin • Ensure the USB device has been formatted with FAT format. •... -
Page 41: Cloning Procedures
Cloning Procedures (Cont.) Teach Master TV Setup to Target TV 1. Turn ON the Target TV. 2. The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the TV: • If the wizard is displayed, the TV is in the required factory default state. To continue with this procedure (see also note below), exit the wizard, and then continue with step 3. -
Page 42: Ftg Mode Of Operation
FTG Mode of Operation This section describes how to create an FTG Configuration (.tlx) file using the FTG File Manager. It also describes how to locally configure a TV for FTG Mode operation. See also the FTG Mode overview on pages 7 to 8 for further information on FTG Mode. - Page 43 FTG Mode of Operation (Cont.) (Continued from previous page) Note: To clear the current TLX File Contents, click the New button in the TLX File command section of the FTG File Manager main screen (above the TLX File Contents window). 3.
-
Page 44: Teaching Ftg Configuration To A Tv
Teaching process (see “TV Configuration Options” and/or “USB Configuration” on pages 14 and 18, respectively, as necessary). • You may also use the LG Smart Install utility to complete the Teaching process. See “LG Smart Install Utility” on pages 20 to 21 for further information. - Page 45 FTG Mode of Operation (Cont.) (Continued from previous page) 3. If applicable (see also “Before You Begin” on previous page), make sure to assign the appropriate Zone designation(s) in the Target TV at this time. USB Download Menu Note: In order for the proper location-specific TV Zone and/or Upgrade TV Software Wi-Fi Zone profile data to be applied, the Zone designation(s) Upgrade PTC Software...
-
Page 46: Learning Ftg Configuration From A Tv
FTG Mode of Operation (Cont.) Learning FTG Configuration from a TV To ensure that decryption of Pro:Idiom encrypted channels is enabled, it is recommended that you create an FTG Configuration file using the FTG File Manager as described on pages 42 to 43. However, if necessary, there is an option to save (Learn) an FTG Configuration file from an LY750H TV to a USB memory device. -
Page 47: Optional Manual Configuration / Tv Setup
FTG Mode of Operation (Cont.) (Continued from previous page) 5. Use the Up/Down arrow keys to select Learn From TV (TLX), and then press OK. 6. In the Learn From TV (TLX) window, to differentiate this TLX file from others, you can use the Up/Down arrow keys to change the last five digits of the filename. -
Page 48: Ftg Mode Of Operation
FTG Mode of Operation (Cont.) (Continued from previous page) 3. Use the Installer Remote to access the PTC Installer Menu (see “Accessing the Installer Menu” on page 22 for further information). 4. Set Installer Menu item 003 BAND/AFC, as appropriate. •... -
Page 49: Ftg File Manager Utilities Overview
FTG File Manager Utilities Overview FTG File Manager Main Screen The FTG File Manager main screen enables you to compile, modify, and save FTG Configuration (.tlx) files. It also allows you to change the Zone assignment for each Installer Menu profile, if desired (see Reference section, “Using the TV’s Zoning Features,”... -
Page 50: Ftg Channel Map Configuration Utility
FTG File Manager Utilities Overview (Cont.) FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to create, view, edit, and print a Logical Channel Map. PRINT MAP EDIT/ADD MAP Click to open the FTG Click to display a printable Channel Map Editor to create FTG Channel Map Report. -
Page 51: Ftg Channel Map Editor
FTG File Manager Utilities Overview (Cont.) FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and the FTG Channel Map. LOGICAL CHANNEL MAPPING CUSTOM CHANNEL LABELS/ICONS SET CHANNEL ATTRIBUTES Select a Logical Channel number. Then, Enter custom labels and select icons Check/select Encrypted, OSD, assign the RF, Major, and Minor channel... -
Page 52: Ftg Installer Menu Configuration Utility
FTG File Manager Utilities Overview (Cont.) FTG Installer Menu Configuration Utility CONFIGURATION SETTINGS Select tabs for categories of Installer Menu items to set up TV. Filename of opened FTG Configuration (.rml) file created using FTG Device Configuration Application. Notes: • The Pro:Centric tab enables you to set up Pro:Centric-specific parameters. -
Page 53: Ip Environment Setup
IP Environment Setup The IP Environment Menu enables you to set up the network features of the TV. With the exception of Network Connection settings, the IP Environment settings are editable (with the Installer Remote) only if the TV is in Pass-through Mode and read-only when the TV is not in Pass-through Mode. Also, if you intend to create a Master TV Setup for cloning purposes (using a TLX file—see Master TV Setup procedure on pages 32 to 35), all IP Environment settings, with the exception of Wired Network Connection settings and the TV name (editable in the Media Share Menu), may be cloned. -
Page 54: Network Status
IP Environment Setup (Cont.) Wired Network Connection 1. The next Network Connection window will enable you to specify Network Connection the IP and DNS configuration for this TV. Auto (DHCP) tabs will be selected by default. If a DHCP server is configured and a Configure IP and DNS modes. - Page 55 IP Environment Setup (Cont.) (Continued from previous page) Note: Make sure you have the network security password/PIN available if you are attempting to connect to a secured network. Note: (AP List and Enter the SSID options only) As with a wired connection, a second Network Connection window will enable you to specify the IP and DNS configuration for this network connection.
-
Page 56: Ip Stream Control
IP Environment Setup (Cont.) (Continued from previous page) The TV will display a status screen as it confirms each of the Network Status network elements, including the TV status, the gateway status, the DNS status, and the Internet status (see example at right). Wired network is connected. -
Page 57: Pro:centric Setup
IP Environment Setup (Cont.) IP Environment Move Pro:Centric Setup Pro:Centric options enable you to configure the TV with the appropriate settings to connect to the Pro:Centric server. Use the Up/Down arrow keys on the Installer Remote to navigate between fields. 1. -
Page 58: Wake On Lan Setup
IP Environment Setup (Cont.) (Continued from previous page) Note: Setting the Media Type to “IP” automatically sets the Data Channel field to “253.” You cannot alter this setting (unless you revert Media Type to “RF”). Also, it is not possible to direct enter “253”... -
Page 59: Media Share Setup
Media Share Setup Media Share allows you to enable Smart Share™, Wi-Fi Screen Share, and DMR options on this TV. • The LG Smart Share feature allows guests to see data on the TV shared by DLNA ® Certified devices on the same network. -
Page 60: Pre-Loaded Applications
IP Environment Setup (Cont.) Pre-loaded Applications This option allows you to select which of the pre-loaded application icons to display on this TV’s Application Launch bar. The Application Launch bar is available when the Pro:Centric application is disabled. If the Pro:Centric application is enabled, it is not necessary for pre-loaded applications to be selected as described below. -
Page 61: Remote Jack Pack / Tv Connections & Setup
Reference: Remote Jack Pack / TV Connections & Setup Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 1). -
Page 62: Device
This section describes how to update TV (CPU) and/or PTC software using the USB Download Menu, though you may also use the LG Smart Install utility to upgrade software, if desired. See “LG Smart Install Utility” on pages 20 to 21 for further information. -
Page 63: Downloading A Splash Screen Using A Usb Memory Device
This section describes how to download a splash screen image using the USB Download Menu, though you may also use the LG Smart Install utility to download the splash image, if desired. See “LG Smart Install Utility” on pages 20 to 21 for further information. -
Page 64: Power Consumption Settings
Reference: Power Consumption Settings The following tables assume that Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). 32LY750H 39LY750H 42LY750H 47LY750H 55LY750H Item 099 Back Power Power Power Power Power Percent Percent Percent Percent Percent Lighting... -
Page 65: Tv Aux Input Configuration
Reference: TV Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DATA STATUS DIRECT ACCESS Installer STATUS TYPE TYPE 0xD2 TYPE 0x0D Tuning Menu Item Installer Menu 0x41 SOURCES CURRENT AV 046 START ENABLED (R/W) SOURCE (R) SOURCE (R) AUX SRCE (Start Aux Installer... -
Page 66: Auto Input(S) Sensing Feature
Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual inputs), refer to the table on the following page. -
Page 67: Auto Input(S) Sensing Feature
Reference: Auto Input(s) Sensing Feature (Cont.) Inputs Item 042 Installer Menu Value Display HDMI 1 HDMI 2 HDMI 3 Enabled Disabled Disabled Disabled DDDXXXX0 Disabled Disabled Disabled Enabled DD5XXXXD Enabled Disabled Disabled Enabled DD5XXXX0 Disabled Enabled Disabled Disabled D6DXXXXD Enabled Enabled Disabled Disabled... -
Page 68: Rjp Model List & Input Auto-Sensing Hierarchy
Reference: RJP Model List & Input Auto-sensing Hierarchy RJP Legacy Models • RJP-101M • RJP-110WBR • RJP-101ML • RJP-110S • RJP-110F • RJP-120G • RJP-110FW • RJP-120T • RJP-110W • RJP-201B/202B RJP Scaler Models • RJP-301B RJP Input Auto-sensing Hierarchy Priority Video Audio... -
Page 69: Restoring Factory Defaults On The Tv(S)
This section describes how to restore a single TV, regardless of its current mode, to a factory default condition. The following procedure requires that you contact LG technical support to obtain a predefined value/password for Installer Menu item 117 FACT DEFAULT that enables access to initiate a factory “IN-STOP”... -
Page 70: Using The Tv's Zoning Features
Reference: Using the TV’s Zoning Features This section describes the TV Zoning and Wi-Fi Zoning features available with the LY750H model TVs. These features are primarily intended for use when the TV is configured for FTG Mode operation; however, Wi-Fi Zoning, along with selected elements of TV Zoning (Installer Menu and TV Setup Menu profile Zone assignments), may also be used with TV cloning processes using a USB memory device / TLX file. - Page 71 Reference: Using the TV’s Zoning Features (Cont.) Note: While a channel can be restricted from up to eight Zones, a TV can only ever be in (set for) one Zone. See also the FTG Channel Map Editor overview on page 51. At the same time, keep in mind that the TV Zone designations are not mutually exclusive.
- Page 72 Reference: Using the TV’s Zoning Features (Cont.) Using the Wi-Fi Zoning Feature with Cloning Configuration A location-specific Wi-Fi configuration / TLX file may be saved (Learned) from an individual TV as part of a Master TV Setup and then be used during Teaching. First, the wireless network (i.e., the access point login data) must be configured in the Master TV’s IP Environment Menu (see “Wireless Network Connection”...
-
Page 73: Using The Tv's Zoning Features
Reference: Using the TV’s Zoning Features (Cont.) (Continued from previous page) • Label: Allows you to select a North, South, East, or West text label for this TV. Use the Up/Down arrow keys to select the applicable label. • Room Number: Allows you to specify the number of the room in which the TV is located. You can use the number keys on the Installer Remote to direct enter a room number. -
Page 74: Wi-Fi Screen Share Features
Reference: Wi-Fi Screen Share Features When the TV’s Wi-Fi Screen Share and DMR options are enabled in the IP Environment / Media Share Menu (see “Accessing the IP Environment Menu” and “Media Share Setup” on pages 53 and 59, as necessary), guests have the ability to use the following Wi-Fi Screen Share features: •... - Page 75 Device name Connection you wish to share, and then press OK. LG-P930 3. A new pop-up window will prompt you to confirm your connection request. Select Yes and press OK to continue. The share request will be sent to the targeted device. The user of that device may choose to allow or not allow the share connection.
-
Page 76: Wi-Fi Screen Share Features
Reference: Wi-Fi Screen Share Features (Cont.) Smart Mirroring / WiDi Smart Mirroring / WiDi With the Smart Mirroring / WiDi pop-up window on display, use the following procedure to turn ON Smart Mirroring and WiDi and establish A device which supports Smart Mirroring or WiDi technology can connect and have its display a connection. -
Page 77: Ly750H Rear And Side Jack Panels
Reference: LY750H Rear and Side Jack Panels OPTICAL DIGITAL AUDIO OUT USB IN 1 Use for amps and home theater systems. Note: Insert USB memory device for software updates, When the TV is OFF, this port is not enabled. cloning purposes, FTG Mode configuration, picture/ music entertainment, etc., as applicable. -
Page 78: External Stereo Speaker Setup
Reference: External Stereo Speaker Setup The three-contact (left, right, ground) SPEAKER OUT 3.5 mm jack on the LY750H rear panel provides stereo speaker signal outputs (fixed speaker, variable speaker, or fixed line level [amplifier]) for external audio equipment. Set Installer Menu item 097 AUDIO OUTPUT as required in accordance with external audio equipment connected to the TV. -
Page 79: Installer Remote Control Typical Key Functions
Reference: Installer Remote Control Typical Key Functions The LG Installer Remote is supplied with and dedicated to operate the TV. The LG Installer Remote illustrated below shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV. -
Page 80: Troubleshooting
IR path to TV’s receiver obstructed. Remove obstructions. Weak batteries. Replace batteries. Wrong battery polarity. Check that “+” and “-” match in battery compartment. Too much light in room. Dim room light. Wrong Installer Remote. Requires compatible Installer Remote. Contact your LG dealer. 206-4263... -
Page 81: Commercial Mode Check
Troubleshooting (Cont.) Commercial Mode Check Use this flowchart to determine whether the TV is currently in Commercial Mode. Press POWER on Installer Remote. connected Plug into AC TV turned to AC Power outlet. Power? Leave the TV set ON, and press MENU SETTINGS on the Installer Remote. -
Page 82: Glossary Of Terms
The process of capturing a Master TV Refers to a particular commercial mode of Setup and transferring it to a Target TV operation within an LG TV. See also FTG Zenith proprietary security software that using a USB memory device. -
Page 83: Document Revision History / Open Source Software Notice 83
In addition to the source code, all referenced license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon e-mail request to opensource@ lge.com. - Page 84 Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric is a registered trade- mark of LG Electronics Inc. Smart Share is a trademark of LG Electronics Inc. DLNA Certified is a registered trademark of Digital Living Network Alliance. Intel is a registered trademark of Intel Corporation in the U.S.