Drum; Air Seals And Drum Shaft Supports - Electrolux TC2 Service Manual
Condenser dryer with electronic control system
Hide thumbs
Also See for TC2:
- Service manual (75 pages) ,
- Service manual (43 pages) ,
- Service manual (78 pages)
Table of Contents
Advertisement
6.3 Drum
1 – Front flange
2 – Drum housing
3 – Rear flange
4 – Drum lifters
5 - Plastic band
The drum consists of two half-shells (front and rear) which are joined together by a wide plastic band (5).
Separation of the drum into two parts allows the conductimetric sensor to determine the conductivity of the
washing inside the drum.
Parts 1, 2 and 3 are connected by crimping.
The plastic lifters are secured by screws to the internal wall of the drum.
The various elements which make up the drum are in sheet steel.
The rear drum shaft is fitted to the rear flange using eyelet rivets.
6.4 Air seals and drum shaft supports
Rear air seal
1 - Rear seal (fitted to rear panel)
2 - Drum
3 - Rear panel
Rear drum support
4 – Anti-clutching washer
5 – Fixing ring (Benzing)
6 – Rear panel
7 – Drum spindle
8 – Support with bushing (fitted to the rear panel)
Front drum support and air seal
9 – Drum
10 – Felt ring with tubular support
11 – Duct
Lower drum support
9 – Drum
10 – Felt ring with tubular support
11 – Duct
12 – Drum support roller
SOI/ADL
18/57
599 38 46-21
- Quick Links:
- Diagnostics System
Hide quick links:
Advertisement
Table of Contents
