Makita BHP343 Instruction Manual
Cordless hammer driver drill
Hide thumbs
Also See for BHP343:
- User manual ,
- Instruction manual (64 pages) ,
- Instruction manual (29 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita BHP343
Summary of Contents for Makita BHP343
- Page 1 INSTRUCTION MANUAL Cordless Hammer Driver Drill BHP343 BHP453 009083 IMPORTANT: Read Before Using.
-
Page 2: Specifications
The following show the symbols used for the equipment. to EN60745: Be sure that you understand their meaning before use. ･ Read instruction manual. Model BHP343 ･ Sound pressure level (L ) : 80 dB(A) Only for EU countries Ni-MH... - Page 3 Makita Corporation responsible Keep children and bystanders away while manufacturer declare that the following Makita operating a power tool. Distractions can cause machine(s): you to lose control. Designation of Machine: Electrical safety Cordless Hammer Driver Drill Power tool plugs must match the outlet.
- Page 4 When operating a power tool outdoors, use an 19. Disconnect the plug from the power source extension cord suitable for outdoor use. Use of and/or the battery pack from the power tool a cord suitable for outdoor use reduces the risk of before making any adjustments, changing electric shock.
- Page 5 GEB056-4 using battery. Do not disassemble battery cartridge. CORDLESS HAMMER DRIVER If operating time has become excessively DRILL SAFETY WARNINGS shorter, stop operating immediately. It may result in a risk of overheating, possible burns Wear ear protectors with impact drilling. and even an explosion.
-
Page 6: Functional Description
Reversing switch action FUNCTIONAL DESCRIPTION 1. Reversing switch CAUTION: lever Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1. Red part 2. -
Page 7: Operation
Selecting the action mode Installing or removing driver bit or drill bit 1. Adjusting ring 1. Sleeve 2. Action mode changing ring 3. Graduation 4. Arrow 009087 009088 This tool employs an action mode changing ring. Select Turn the sleeve counterclockwise to open the chuck jaws. one of the three modes suitable for your work needs by Place the bit in the chuck as far as it will go. -
Page 8: Maintenance
• If you need any assistance for more details regarding the drilling. In fact, this excessive pressure will only these accessories, ask your local Makita Service Center. serve to damage the tip of your bit, decrease the Drill bits •... - Page 9 Various type of Makita genuine batteries and • chargers Rubber pad assembly • Wool bonnet • Foam polishing pad • Plastic carrying case • NOTE: Some items in the list may be included in the tool • package as standard accessories. They may differ...
- Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884820C224...