hit counter script

Important Information; Definitions Of Signal Words; Explanation Of The Nailing Action Of The Hitachi Nailer - Hitachi NT 65MA4S Instruction Manual

Finish nailer
Hide thumbs Also See for NT 65MA4S:
Table of Contents

Advertisement

Available languages

Available languages

IMPORTANT INFORMATION

Read and understand tool labels and all of the operating instructions,
safety precautions and warnings in this manual before operating or
maintaining this nailer.
Failure to follow warnings could result in DEATH or SERIOUS INJURY.
Most accidents that result from the operation and maintenance of Nailers are caused by
the failure to observe basic safety rules or precautions. An accident can often be avoided
by recognizing a potentially hazardous situation before it occurs, and by observing
appropriate safety procedures.
Basic safety precautions are outlined in the "SAFETY" section of this Manual and in the
sections which contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identifi ed
by DANGERS and WARNINGS on the Nailer and in this Manual.
Never use this Nailer for applications other than those specifi ed in this Manual.

DEFINITIONS OF SIGNAL WORDS

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury, or may cause machine damage.
NOTE emphasizes essential information.

EXPLANATION OF THE NAILING ACTION OF THE HITACHI NAILER

○ SINGLE SEQUENTIAL ACTUATION MECHANISM:
First, press the push lever against the wood; next, pull the trigger to drive the fastener.
After fastening once, fastening will not be possible again until the trigger is released and
pressed again.
○ CONTACT ACTUATION MECHANISM:
First, press the push lever against the wood; next, pull the trigger to drive the fastener.
First, pull the trigger; next, press the push lever against the wood to drive the fastener.
If the trigger is held back, a fastener will be driven each time the push lever is pressed against
the wood.
English
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nt 65ma4 instruction and safety

Table of Contents