Page 1
FAVORIT 88070 i Dishwasher User information...
Page 2
Dear Customer, Please read this user information carefully and keep it to refer to later. Please pass the user information on to any future owner of the appli- ance. The following symbols are used in the text: Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance.
Operating Instructions 1 Safety Prior to using for the first time • Follow the ”Instructions for installation and connection”. Correct Use • The dishwasher is only intended for washing domestic dishes. • Additions or modifications to the dishwasher are not permitted. •...
Diagram of Appliance Ceiling spray arm Upper basket spray arm and lower spray arm Water softener unit. Salt Container Detergent Dispenser Rinse aid dispenser Rating plate Filters Interior lighting...
Control Panel ON/OFF button Direction buttons OPTION Button button OK/START RESET Display button Button functions ON/OFF – Switching the appliance on and off – Selecting within the menu Direction buttons – Selecting a value when adjusting options or settings OPTION –...
Switching on for the first time – setting the language 1. Press the ON/OFF button. First of all HELLO appears in the dis- play. As soon as the dishwasher is ready for use, this is replaced by LANGUAGE ENGLISH; the word ENGLISH is flashing.
Display Info status bar Text line Symbol line The info status bar consists of a row of individual lamps that is divided into two sections: the left section refers to the Programmes menu, the right section to the Options menu. •...
Basic operation This section contains basic information regarding the use of your dish- washer. Please read this section very carefully. An overview of the menus Programmes menu Options menu DELAY START AUTOMATIC OPTION 30 MINUTES 3 IN 1 button SETTINGS… 70°...
• Use the OK/START button to switch from the menu item SETTINGS… to the Settings sub-menu. The Settings sub-menu Go to the desired setting using the direction buttons ( ). In the info status bar your position within the sub-menu is always shown. •...
Prior to Using for the First Time 1. Set the water softener 2. Fill up with dishwasher salt 3. Fill up with rinse aid If you wish to use “3in1” detergent, please do the following: – First read the section “Using 3in1 detergents”. –...
Page 13
Setting electronically: 1. Press the ON/OFF button. If the name of a programme stage is displayed in the display, a dish- washing cycle is active. First of all you must cancel the dishwashing cy- cle: – Press the RESET button. CONFIRM CANCEL? appears in the display. –...
Adding special salt To decalcify the water softener, it must be filled up with dishwasher salt. Use only special salt suitable for domestic dishwashers. If you do not use 3in1 detergent, fill up with dishwasher salt: – Before using the dishwasher for the first time. –...
Filling Up with Rinse Aid Rinse aid causes the rinse water to flow easily from the crockery leav- ing gleaming dishes and glassware. If you do not use 3in1 detergent, fill up with rinse aid: – Before using the dishwasher for the first time. –...
Setting the Amount of Rinse Aid Required Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (increase the amount) can be seen on glasses and dishes. (See section “If dishwashing results are not satisfac- tory”.) The dosage can be set from 1-6.
In daily use Loading cutlery and dishes Sponges, cleaning cloths and any other objects that can absorb water must not be washed in the dishwasher. Plastic and Teflon-coated dishes and pans tend to retain water droplets. These dishes and pans therefore do not dry as well as those made of china and stainless steel.
Loading cutlery Warning: Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery rack or in the upper basket because of the risk of injury. Place knives, small spoons and small forks in the cutlery tray which is in the upper basket.
Page 19
The cutlery basket can be opened out. Always make sure that you put your hand around both parts of the two- part handle when removing it from the dishwasher. 1. Place the cutlery basket on a table or work surface. 2.
Page 20
Cups, Glasses, Coffee Service Load smaller, fragile crockery and long, sharp cutlery in the upper bas- ket. • Arrange items of crockery on and under the folding cup racks so that they are offset from each other and water can reach all items.
• The row of spikes on the left of the upper basket is also in two parts and can be folded away. Spikes not folded away: place glasses, mugs etc. in the upper basket. Spikes folded away: More room for serving dishes. Adjusting the Height of the Upper Basket Maximum height of dishes in the Upper basket...
Adding Detergent Detergents remove the dirt from dishes and cutlery. The detergent must be added before the cycle starts. Only use detergent intended for do- mestic dishwashers. The detergent compartment is lo- cated on the inside of the door. 1. If the lid is closed: Press the release button.
Detergent tablets Detergent tablets from different manufacturers dissolve at different rates. For this reason, some detergent tablets do not attain their full cleaning power during short cycles. Therefore please use dishwashing cycles with pre-wash when using detergent tablets. Using 3in1 detergents These products are detergents with a combined cleaning, rinsing and salt function.
Selecting the dishwashing cycle (Cycle Table) Programme Consumption sequence values Dishwashing- Suitable Type of cycle for: soiling Dinner serv- AUTOMATIC normally soiled, ice and • • • • (50°-65°) dried-on food remains cookware Dishes, ex- 30 MINUTES just used, lightly to •...
Page 25
Programme Consumption sequence values Dishwashing- Suitable Type of cycle for: soiling Dessert dish- es and coffee • • • 45° GLASS service, deli- lightly soiled cate glass- ware Used dishes that are PREWASH All types of being stored in the •...
Starting a Dishwashing Cycle 1. Check that the spray arms can turn freely. 2. Turn the water tap on fully. 3. Close the door. 4. Press the ON/OFF button. 5. Using the direction buttons ( ) select the desired cycle. The name of the selected dishwashing cycle will flash.
1. Open the door carefully. The dishwashing cycle will stop, in the display: PLEASE CLOSE DOOR 2. Close the door. The cycle will continue. Cancelling the dishwashing cycle 1. Press the RESET button. In the display: CONFIRM CANCEL ? 2. Press the OK/START button. The programme is cancelled.
Switching Off the dishwasher Switch off the dishwasher if the messages PROGRAMME END and PLEASE SWITCH OFF are being displayed alternately. With some dishwashing cycles, the drying fan continues to run even af- ter the end of the cycle. If the acoustic signal has been enabled, a continuous tone will sound for 15 seconds at the end of the dishwashing cycle.
Cleaning the filters The filters must be regularly checked and cleaned. Dirty filters will spoil the wash results. 1. Open the door and remove the lower basket. 2. Turn the handle about ¼ of a turn anticlockwise (A) and remove the fil- ter system (B).
What to do if … Resetting the language You can reset the language of the display to the factory setting at any time. As well as the language, the CONTRAST and BRIGHTNESS settings are also reset. 1. Press the RESET button repeatedly until the display in the display no longer changes.
Page 31
Malfunction Possible cause Remedy Water tap is blocked with Check the water tap and limescale or faulty. have it repaired if necessary. The tap is turned off. Turn the tap on. The filter (where present) in Clean the filter in the the threaded hose fitting threaded hose fitting.
Malfunction Possible cause Remedy The dishwashing com- partment is made from rust-free stainless steel. Rust spots in the washing compartment are due to rust particles from exter- Only wash cutlery, dishes Rust spots are visible in the nal sources (rust particles and pans that are suitable dishwashing compartment.
There are dried water drops on the glasses and dishes. • Increase rinse aid dosage. • The detergent may be the cause. Contact the detergent manufactur- er's customer advice centre. Glass corrosion • Contact the detergent manufacturer's customer advice centre. Disposal Packaging material The packaging materials are environmentally friendly and can be recy-...
Technical Data Capacity: 12 place settings including serving dishes Permitted water pres- 1-10 bar (=10-100 N/cm = 0.1-1.0 MPa) sure: Electrical connection: 230 V, 10 A, also see the rating plate on the right-hand side of the dishwasher’s interior door . Dishwashers that can be integrated and built-in Dimensions: 820 - 880 x 596 x 570 (H x W x D in mm)
Page 35
Sample loading arrangements: Upper basket without cutlery tray Upper basket with cutlery tray * If necessary, move the cup rack from right to left. When doing this, ensure that the cup rack is at the same height. Lower basket with cutlery basket Cutlery basket...
Installation and connection instructions 1 Safety Information for the Installation • Only transport the dishwasher in an upright position, otherwise salt water may run out. • Before using the dishwasher for the first time, check for any damage caused in transport. Do not under any circumstances connect an ap- pliance that is damaged.
Installing the Dishwasher • The dishwasher must be installed on a firm floor and adjusted to en- sure that it is stable and level in all directions. • To compensate for unevenness in the floor and to match the height of the appliance to that of sur- rounding units, extend the thread- ed feet using a screwdriver.
Connecting the dishwasher Connecting to the water supply • The dishwasher can be connected to cold and hot water supplies up to max. 60°C. • The dishwasher must not be connected to open hot water appliances or instantaneous water heaters. Permitted water pressure Lowest permitted water pressure: Consult your plumber if the water pres-...
Water drainage Drain hose The drain hose must not be kinked, crushed or entangled. Connecting the drain hose: – Maximum permitted height: 1 metre. – Minimum required height: 40 cm above the bottom edge of the ap- pliance. Extension hoses •...
Electrical Connection Any electrical work required to install this appliance should be car- ried out by a qualified electrician or competent person. WARNING - This appliance must be earthed. The manufacturer declines any responsibility should these safety measures not be observed. Before switching on make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.
Connecting systems The water inlet hose, drain hose and the mains cable must all be con- nected to the side of the dishwasher as there is no space for them be- hind the appliance. 2 connection pieces 45° or doublevalve water- waterinlet straight, outer ø...
Great Britain Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we...
AEG appliance, or for further information on AEG products please contact our Customer Care Depart- ment by letter or telephone at the address below or visit our website at www.aeg.co.uk. Customer Care Department For Customer Service in the Republic AEG Domestic Appliances...