Pull the back cover off while still Then click the battery down – (b) holding the button – (b) Insert the SIM with the ACN Logo Replace the back cover onto the Facing you and the cut off corner Pocket Wi-Fi...
Remove the back cover and the modem Find and write down the SSID and WIFI key from the label. Insert the SIM with the ACN Logo Facing you and the cut off corner at the top left Insert the battery and replace the back cover.
Mobile Wi-Fi ™ User Guide Windows Installation • Please make sure the modem is powered on. • After connecting the modem’s USB cable to your computer, information balloons will appear from your System Tray (Located down the bottom right hand corner) and will install necessary drivers and once finished, the final balloon will notify that “Your Device is Ready To Use”...
Page 5
Mobile Wi-Fi ™ User Guide Please read, and agree to, the Software Licence Agreement and leave the installation directory unchanged. The software will start to install, and a progress screen will be displayed. Once the software and drivers have installed, click Finish...
Page 6
Mobile Wi-Fi ™ User Guide Your computer will now use the new software to properly configure your modem. Please wait until the software tells you it is finished. An information balloon will pop up from your System Tray area to advise you of this. This process may take several minutes.
Page 7
Mobile Wi-Fi ™ User Guide • Click ‘Profile Management’ • Click ‘New’ • Enter Profile name as ‘ACN’ • APN > Select ‘Static’ and type the word ‘connect’ • Click ‘OK’...
Page 8
Mobile Wi-Fi ™ User Guide Now you can click the ‘connect’ button...
Click OK to continue. When you see the message “Install Succeeded”, click Close to finish. Your computer will now start the ACN Mobile Partner software which is already configured for the ACN Mobile network. Click the Connect button to establish a connection.
User Guide Changing the SSID To personalise your Mobile Wi-Fi you can change the SSID to a name of your choice. To do this you will need to follow the steps below. Please ensure you are connected to the modem by Wi-Fi or USB cable before proceeding.
Page 11
Mobile Wi-Fi ™ User Guide Once you have logged in click the following • Click ‘Advanced Settings’ Click ‘WLAN Settings’ • Ensure WLAN is ‘Enabled’ Tip: If connected VIA Wi-Fi it will be enabled If connected VIA USB it will be disabled.
Page 12
Mobile Wi-Fi ™ User Guide When you have confirmed WLAN is ‘Enabled’ To Change the SSID Click ‘WLAN Basic Settings’ • You will be displayed with the following screen • Change the ‘Name (SSID)’ to your preferred name • Click ‘Apply’, then click ‘Continue’...
Please ensure you have connected to the modem through Wi-Fi or USB cable before proceeding. Once you are connected to the Mobile Wi-Fi. • Open your browser, this can be Internet Explorer, Mozilla Firefox etc •...
Page 14
Mobile Wi-Fi ™ User Guide Once you have logged in click the following • Click ‘Advanced Settings’ Click ‘WLAN Settings’ • Ensure WLAN is ‘Enabled’ Tip: If connected VIA Wi-Fi it will be enabled If connected VIA USB it will be disabled.
Page 15
Mobile Wi-Fi ™ User Guide When you have confirmed WLAN is ‘Enabled’ To Change the SSID Click ‘WLAN Advanced Settings’ • You will be displayed with the following screen. From here you can choose what type of security to use and change your password.