Advertisement
Quick Links
Your CTC | TV service offers many new features and capabilities.
Enjoy your viewing experience and discover the functionality of your
Remote Control and CTC | DVR service with help from this guide.
Programing your remote control for your TV:
1. Make sure your TV is turned on.
2. Press and hold the
TV Button
on your remote.
3. Release both keys and the mode key will flash twice
4. Enter the following code ______________
using the number keys on your remote.
The mode key will flash three times to indicate that the code was accepted.
5. Point the remote at the TV and press POWER.
6. Did the TV turn off?
If yes, now your remote is programmed to control your TV.
If no, repeat this procedure from Step 2.
Rebooting the Cisco Set Top Box:
Reach to the back of your set top box and pull the black
power cord out for one minute to allow all memory to
drain. After one minute plug the cord back in. It is normal
for the set top box to take up to 10 minutes to reboot.
Default PIN:
For access to menu options such as
Parental Controls, the
Default PIN # is: 0000
Identifying your set-top box cables
Ethernet
HDMI
Cisco
Troubleshooting Tips
and the
OK Button
Component
S Video
Remote Control Guide
Automatic TV Code Search:
1.Turn on the TV that you want to program your remote to.
2. Point the remote at your TV. Press and hold the
and the
OK Button
at the same time.
3. Release both keys and all the
4. Enter the programming
code 922
number keys on the remote.The
twice indicating a successful entry.
5. Point the remote toward the TV, and press and hold
PLAY.The remote will automatically start testing codes.
6. Keep holding down the
PLAY Button
When a code is found that works your TV will shut off.
7. Release the
PLAY Button.
8. Save the code by pressing the
remote.The
mode keys
will flash three times indicating
successful entry.
Note:
Pressing the rewind button allows you to go
back if you missed your code or you hold down the
play button too long after your TV shuts off.
RCA Cable
TV Button
mode keys
will blink twice.
by pressing the
TV Button
will blink
and watch your TV.
ENTER Button
on the
Coax
Power
Advertisement
Related Manuals for Cisco CTC TV
Summary of Contents for Cisco CTC TV
-
Page 1: Troubleshooting Tips
If no, repeat this procedure from Step 2. When a code is found that works your TV will shut off. 7. Release the PLAY Button. Rebooting the Cisco Set Top Box: 8. Save the code by pressing the ENTER Button on the Reach to the back of your set top box and pull the black remote.The... -
Page 2: Device Control
Device Control POWER Turns devices on or off Adjusts volume MUTE Enables set-top mode functions Mutes sound Volume/Mute keys are assigned to the TV when TV mode key is programmed with a valid code. Enables TV mode functions NUMERIC KEYS Enters channel numbers, text and Enables DVD mode functions remote codes.