Wi-Fi Remote Control; Displaying The Wi-Fi Remote Control - Sony PXW-X500 Operation Manual
Solid-state memory camcorder
Hide thumbs
Also See for PXW-X500:
- Manual (211 pages) ,
- Service manual (184 pages) ,
- Operation manual (103 pages)
Table of Contents
Advertisement
5
Tap
and select [Media Info], then
tap Slot A (for files recorded on media
in slot A) or Slot B (for files recorded on
media in slot B).
The Slot A or Slot B screen appears.
Example: Slot A screen
6
Select the files you want to transfer.
Tap a file to select it. Tap a file a second time
to de-select it.
7
Tap [Transfer to:].
The default destination server specified in
[Default Setting] appears (see "To register a
new destination server" (page 91)).
To change the destination server, tap the
destination server to display a list and then
select a different server.
Enter the directory on the destination server
in [Directory].
8
Tap [Transfer].
Transfer of the selected files begins. To
cancel file transfer, tap [Cancel].
To monitor the file transfer
Tap [Job List] on the SD Card, Slot A, or Slot B
screen to display the Job List screen to check the
status of the file transfer (see page 91).
Wi-Fi Remote Control
You can access the Wi-Fi remote control built
into the camcorder from a smartphone, tablet, or
other device over a wireless LAN connection.
Using the Wi-Fi remote control allows you to
operate the camcorder remotely. This allows you
to start/stop recording or configure settings
remotely, and is useful in applications where the
camcorder is fixed in a remote location or
mounted on a crane, for example.
Displaying the Wi-Fi Remote
Control
The Wi-Fi Remote screen is automatically
resized to match the screen size of the connected
device.
1
Connect the camcorder and device
using a Wireless LAN connection (see
page 80).
2
Launch a browser on the device and
enter "http://<IP_address>/rm.html" in
the URL bar, where "<IP_address>" is
the IP address (Maintenance >Wi-Fi
>IP Address in the setup menu) of the
camcorder.
For example, if the IP address is 192.168.1.1,
enter "http://192.168.1.1/rm.html" in the
URL bar.
3
Enter the user name and password
(Maintenance >Wi-Fi >SSID &
Password (see page 136) in the setup
menu).
When connection is successful, the Wi-Fi
Remote screen appears on the device.
You use the Wi-Fi Remote screen to operate
the camcorder.
You can disable the REC button operation by
sliding the Lock knob to the right on the
screen.
85
- Quick Links:
- Error Messages
Hide quick links:
Advertisement
Table of Contents
