Table of Contents
Advertisement
UHO Camera Housing
6.3
Housings with rear connectors
6.3.1
Connection – UHO – Rear housing video connection
A BNC connector is provided on the rear of the housing. Connect the analog video cable to
this connector.
6.3.2
Connection – UHO – Rear housing power connection
The housings with the rear connectors already mounted are supplied with a 4-pin cable
connector for the power cable.
–
–
Mount the 4-pin cable connector onto the power cable:
1.
2.
3.
4.
5.
Connector terminal number
6.
Bosch Security Systems
The 230 VAC models have a male panel connector. A female cable connector is provided.
The 24 VAC models have a female panel connector. A male cable connector is provided.
Cable diameter must be between 6 mm (0.24 in) and 12 mm (0.47 in).
Strip no less than 6 mm (0.24 in) and no more than 8 mm (0.32 in) of insulation away
from the wire. Do not nick the wires.
Insert the power cord through the back shell assembly and strain relief.
The cable connector terminals accept wire ranging from 0.75 mm² to 2.5 mm² (18 AWG to
14 AWG).
Connect the power input wires to the numbered screw terminals on the mating connector
according to the table.
1
2
3
4
Assemble the cable connector and plug it into the power receptacle on the housing.
Function
AC neutral
AC live
No Connection (do not use)
Ground
Installation Manual
Connection | en
Wire color
Blue
Brown
-
Green/yellow
2014.10 | 5.0 | F.01U.167.418
19
Advertisement
Table of Contents
