Need Only A Quick Start; Ip Addressing - HP ProCurve 2510G Series Manual
Access security guide
Hide thumbs
Also See for ProCurve 2510G Series:
- Specifications (2 pages) ,
- Installation and getting started manual (96 pages)
Table of Contents
Advertisement
Getting Started
Need Only a Quick Start?
Figure 1-3. Getting Help in the CLI
1-8
For information on specific features in the Web browser interface,
■
use the online help. For more information, refer to the Management
and Configuration Guide for your switch.
■
For further information on ProCurve Networking switch technology,
visit the ProCurve Website at:
http://www.procurve.com
Need Only a Quick Start?
IP Addressing
If you just want to give the switch an IP address so that it can communicate
on your network, or if you are not using multiple VLANs, ProCurve
recommends that you use the Switch Setup screen to quickly configure IP
addressing. To do so, do one of the following:
Enter setup at the CLI Manager level prompt.
■
ProCurve# setup
■
In the Main Menu of the Menu interface, select
8. Run Setup
For more on using the Switch Setup screen, see the Installation Guide for
your switch.
Hide quick links:
Advertisement
Table of Contents
