Table of Contents
Advertisement
64
EN
SNAPSHOT Button
T
O
C
P
US
H
Rewind Button (2)
Fast-Forward Button (3)
POWER Switch
Lock Button
Display
OP
Y
T
O
T
A
P
E
"
SN
A
PS
H
O
T
"
Dubbing Images Stored In A
MultiMediaCard To A Tape
Images can be dubbed from a MultiMediaCard to a tape.
1
Load a MultiMediaCard (
(
pg. 10).
2
Set the POWER Switch to "
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
3
To locate the point where you wish to dub a still
2
image, play back the tape. Stop playback at the
desired point.
4
Set the POWER Switch to "
3
down the Lock Button located on the switch. To
select a still image to be dubbed, perform Index
Playback (
pg. 47), Auto Playback (
press 2 or 3 to select the image you wish.
5
To engage Dub-Standby, press SNAPSHOT. The
message "TO COPY TO TAPE PUSH "SNAPSHOT""
appears.
6
While the message is being displayed, press
SNAPSHOT again. The selected still image is
recorded on the tape for approx. 6 seconds.
•The
indicator disappears when dubbing is
complete.
NOTES:
If SNAPSHOT is pressed in step 5 when the tape's erase
protection tab is set to "SAVE", the message "COPYING
FAILED" is displayed.
The XGA image is dubbed onto the tape at 720 x 480
pixels.
You can superimpose a print frame over the selected still
image to be dubbed (
After step 4, superimpose a print frame over the still
image and go to step 5.
DUBBING
(cont.)
pg. 12) and cassette
" while pressing
" while pressing
pg. 45) or
pg. 51) and dub it to a tape.
Hide quick links:
Advertisement
Table of Contents
