JVC KD-DV5000 Instructions Manual

Jvc dvd/cd receiver instructions

Hide thumbs Also See for KD-DV5000:

Instructions manual (82 pages)

Service manual (30 pages)

Schematic diagrams (14 pages)

Table Of Contents

Table of Contents

Quick Links

Summary of Contents for JVC KD-DV5000

Page 1 DVD/CD RECEIVER DVD-/CD-RECEIVER RECEPTEUR DVD/CD DVD/CD-RECEIVER KD-DV5000 AUDIO SUBTITLE DUAL ZONE FOLDER PRESET MENU DISC ENTER 2ndVOL DISC – SETUP RANDOM INTRO 2ndVOL – SHIFT ZOOM This unit is equipped with the display demonstration. To cancel it, see page 9.
Page 2: How To Reset Your Unit
Position And Reproduction Of Labels Bottom panel of the main unit Name/Rating plate CLASS PRODUCT LASER Caution: This product contains a laser component of higher laser class than Class 1. Note: For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on the unit’s chassis.
Page 3 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. WARNINGS • DO NOT install any unit in locations where; – it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
Page 4: Table Of Contents
CONTENTS How to reset your unit ... LOCATION OF THE BUTTONS ... Control panel ... Remote controller ... Preparing the remote controller ... BASIC OPERATIONS ... Turning on the power ... Canceling the display demonstration ... Setting the clock ... Activating the level meter ...
Page 5: Location Of The Buttons
To use these buttons for original functions again after pressing MODE (M), wait for 5 seconds without pressing any of these buttons until the functions mode is cleared. • Pressing MODE (M) again also clears the functions mode. KD-DV5000 5 0 W x 4 6 0 (eject) button (28, 42) 4/¢...
Page 6: Remote Controller
Remote controller AUDIO SUBTITLE DUAL ZONE FOLDER PRESET MENU DISC ENTER 2ndVOL DISC – SETUP RANDOM INTRO 2ndVOL – SHIFT ZOOM IMPORTANT: If “Dual Zone” is turned “On” (see page 40), the remote controller only functions for operating the DVD/CD player. Refer to the pages in parentheses for details.
Page 7: Preparing The Remote Controller
Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. MODE DISP • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
Page 8: Basic Operations
BASIC OPERATIONS 1, 3 Turning on the power Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. Select the source.
Page 9: Canceling The Display Demonstration
Canceling the display demonstration When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds. • It is recommended to cancel the demonstration before you use the unit for the first time. To cancel the display demonstration, follow the procedure below: Press and hold SEL (select) for more...
Page 10: Activating The Level Meter
Set the clock system. 1 Select “24H/12H.” 2 Adjust “24Hours” or “12Hours.” Finish the setting. To check the current clock time when the unit is turned off, press DISP (D). The power turns on and the clock time is shown for about 5 seconds, then the power turns off.
Page 11: Radio Operations
The operations of this section are mainly explained using the buttons on the control panel. When the remote controller can be used for the same operations, it is then explained. Listening to the radio You can use either automatic searching or manual searching to tune in to a particular station.
Page 12: Manual Search
Searching for a station manually: Manual search Select the band (FM1 – 3, AM). 1 Press SRC (source) repeatedly to select the tuner. 2 Press and hold SRC. Each time you press and hold the button, the band changes. Note: This receiver has three FM bands (FM1, FM2, FM3).
Page 13: Storing Stations In Memory
Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).
Page 14: Manual Preset
Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually. Ex.: Storing an FM station of 92.5 MHz into the preset number 1 of the FM1 band. Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
Page 15: Tuning In To A Preset Station
Tuning in to a preset station You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 13 and 14. Selecting a preset station directly Select the band (FM1 –...
Page 16: Changing The Display Pattern
Changing the display pattern By pressing DISP (D), you can change the information shown on the display. Each time you press the button, DISP the display patterns change as follows: • When receiving an AM or FM non-RDS station Appears only when selecting a preset station number.
Page 17: Rds Operations
What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc.
Page 18 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 58 and 59.) Press number button 4 to select “TUNER”—Tuner category of the PSM settings. The “PTY Stnby” (standby) setting screen appears on the display.
Page 19 Using PTY Standby Reception PTY Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) from any source except AM stations. To select your favorite PTY code for PTY Standby Reception When shipped from factory, PTY Standby Reception has been set to work for searching for “News”...
Page 20: Searching Your Favorite Programme
The PTY indicator either lights up or flashes. • If the PTY indicator lights up, PTY Standby Reception is activated. If a station starts broadcasting the selected PTY programme, this unit automatically tunes in to the station. • If the PTY indicator flashes, PTY Standby Reception is not yet activated since the station being received does not provide the signals used for PTY Standby Reception.
Page 21 Press and hold the number button for more than 2 seconds to store the PTY code selected into the preset number you want. Selected preset number flashes for a while. Press and hold T/P for more than 2 seconds to exit from this mode. To search your favorite programme type Press and hold T/P for more than 2 seconds while listening to an FM...
Page 22: Other Convenient Rds Functions And Adjustments
Other convenient RDS functions and adjustments Automatic selection of the station when using the number buttons Usually when you press the number button, the preset station is tuned in. However, when the preset station is an RDS station, something different will happen. If the signals from that preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency broadcasting the...
Page 23 PTY codes News: News Affairs: Topical programmes expanding on current news or affairs Info: Programmes which impart advice on a wide variety of topics Sport: Sport events Educate: Educational programmes Drama: Radio plays Culture: Programmes on national or regional culture Science: Programmes on natural science and technology...
Page 24: Playable Discs
PLAYABLE DISCS Discs you can play: Disc Type DVD Video COMPACT Video CD DIGITAL VIDEO Audio CD CD-Rs or CD-RWs including MP3 files with the file extension code <mp3>. MP3 disc They must be recorded in the format compliant with ISO 9660 Level 1, ISO 9660 Level 2, Romeo, and Joliet.
Page 25 MP3 discs MP3 is an abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. MP3 is simply a file format with a data compression. By using MP3 format, one CD-R or CD-RW can contain 10 times as much data as a regular CD can.
Page 26: Basic Disc Playback
BASIC DISC PLAYBACK The following marks used in this manual indicate the playable discs. Video CD DVD Video with/without PBC Audio CD MP3 disc Before performing any operations, make sure the following... • Turn on the monitor for playing a DVD or VCD. If you turn on the monitor, you can also control the CD and MP3 playback by referring to the monitor screen.
Page 27 • Display indications when inserting a DVD: 1 Total title number 2 Elapsed playing time of the current title 3 Current title number and chapter number • Display indications when inserting a VCD or CD: 1 Total playback time of the disc 2 Total track number 3 VIDEO CD indicator: appears only when playing back a Video CD.
Page 28: Locating A Particular Title/Chapter/Track
To stop playback temporarily Press 8 on the remote controller. “Pause” flashes on the display. • For DVD and VCD only: A still picture appears. Frame by Frame Playback—You can advance the still picture frame by frame by pressing the 8 repeatedly.
Page 29: Locating A Particular Folder
To locate a particular title/chapter/track directly • For DVD: During play or pause—select a chapter While stopped—select a title • For VCD: While PBC (see page 32) is not in use. From the remote controller: While holding SHIFT (S), press number buttons to select a title, chapter, or track number you want.
Page 30: Dvd/Vcd Special Functions
DVD/VCD SPECIAL FUNCTIONS AUDIO SUBTITLE AUDIO DUAL ZONE FOLDER PRESET MENU ENTER DISC ENTER Number 2ndVOL DISC – SETUP 2ndVOL RANDOM INTRO – SHIFT SHIFT ZOOM Selecting subtitles While playing a disc containing subtitles in different languages, you can select which subtitle to display.
Page 31: Selecting Multi-Angle Views
Notes: • When the pop-up window is shown, you can also select the audio languages (or audio channels) by pressing cursor buttons (5/∞). • For some DVDs and VCDs, changing the audio language (or audio channel) without using the disc menu is prohibited.
Page 32: Zoom In
While playing a VCD: The PBC (PlayBack Control) function allows you to operate the VCD using menus. When you start playback, a menu will automatically appear on the monitor. • A menu may be a list of items, divided screens, or some moving pictures.
Page 33: Advanced Disc Operations
ADVANCED DISC OPERATIONS AUDIO SUBTITLE ANGLE DUAL ZONE FOLDER PRESET ENTER MENU MENU DISC ENTER Number 2ndVOL DISC – RETURN SETUP 2ndVOL RANDOM INTRO REPEAT – SHIFT SHIFT ZOOM Searching for a particular point Forward/Reverse Search You can search for a particular point while playing a disc.
Page 34: Chapter Search
Example (for DVD VIDEO) To play back from 2(H):34(M):00(S) Press number buttons 2, 3, then 4. TIME 2 : 34 :_ _ To play back from 58(M):00(S) Press number buttons 0, 5, then 8. TIME 0 : 58 :_ _ Example (for Video CD/Audio CD) To play back from 23(M):40(S) Press number buttons 2, 3, then 4.
Page 35: Playing In Various Play Modes
Playing in various play modes You can use any of three methods to activate various play modes. • Using the direct buttons on the remote controller. • Using the on-screen bar (see page 37). • Using the buttons on the control panel (see page 45).
Page 36: Random Play
Random Play You can play back tracks on a disc (or in a folder for MP3 discs) at random. • For VCD: While PBC (see page 32) is not in use. Select the random mode you want. The menu bar icon appears on RANDOM the monitor to show the selected mode.
Page 37: Osd Disc Operations
AUDIO SUBTITLE ANGLE DUAL ZONE FOLDER PRESET ENTER MENU DISC ENTER Number 2ndVOL DISC – RETURN SETUP RANDOM INTRO REPEAT 2ndVOL – SHIFT SHIFT ZOOM Status bars for DVD, VCD, and CD • For DVD TITLE 33 CHAP 33 5.1ch •...
Page 38 Move to an item on the menu bar, then press ENTER. The pull-down window for the selected items appears. TITLE 33 5.1ch CHAP. Ex. When selecting When you select down window does not appear. Skip the following steps. • See the following explanation. Select an option or enter a chapter number.
Page 39 Basic procedure for MP3 discs While playing an MP3 disc, the following MP3 CONTROL screen always shows on the monitor. By referring to this screen, you can easily operate the MP3 disc. • Up to 32 characters can be shown for the file names on the monitor, while 64 characters on the display of the receiver.
Page 40: Dual Zone Operations
DUAL ZONE OPERATIONS AUDIO DUAL ZONE DUAL (DVD) ZONE MENU 2ndVOL 2ndVOL SETUP +/– RANDOM 2ndVOL – SHIFT • DO NOT put on the headphones while driving a car. It is dangerous to shut off the outside sounds while driving. •...
Page 41 Adjust the headphone volume through the 2nd AUDIO OUT plug. SHIFT Operate the DVD/CD player using the remote controller by referring to the monitor screen. • When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller.
Page 42: Other Disc Operations
OTHER DISC OPERATIONS In this section, you can learn how to use the buttons on the control panel in order to operate the DVD/CD player. Basic disc playback To stop playback Press ∞ (down). • This unit can remember the end point, and when you start playback again, playback begins from where it has been stopped.
Page 43: Locating A Title/Chapter/Track On A Disc
Locating a title/chapter/track on a disc To locate a particular title/chapter/track directly • For DVD: During play or pause—select a chapter While stopped—select a title • For VCD: While PBC (see page 32) is not in use. Press the number button corresponding to the title/chapter/track number to start its playback.
Page 44: Selecting A Folder/Track To Play Using The Lists
How to go to the desired chapter/track quickly • Ex. 1: To select chapter/track number 32 while playing chapter/track number 6 MODE (Three times) Chapter/ \ 10 \ 20 \ 30 track 6 • Ex. 2 :To select chapter/track number 8 while playing chapter/track number 36 MODE (Three times)
Page 45: Selecting Playback Modes
To select a track and start playback Press and hold 5 (up) or ∞ (down) so that the folder name list of the inserted disc appears on the display. The name of the currently playing folder will be highlighted on the display. Current folder number Press ¢...
Page 46 • For DVD: Chapter • Chapter: Current (or specified) chapter will be repeated. • the display. • Title: Current title will be repeated. • the display. • Off: Repeat Play is canceled. • For CD/VCD: Track • Track: Current (or specified) track will be repeated.
Page 47 • For CD: Disc • Disc: All the tracks in the disc will be played at random. • indicator appears on the display. • Off: Random Play is canceled. • For MP3: Folder • Folder: All the tracks in the folder will be played at random, then move to the next folder and so on.
Page 48: Prohibiting Disc Ejection
Prohibiting disc ejection You can prohibit disc ejection and can lock a disc in the loading slot. While pressing SRC, press and hold for more than 2 seconds. “No Eject” flashes on the display for about 5 seconds, and the disc is locked and cannot be ejected.
Page 49 While playing a CD Text (or CD): Notes: • When the disc title/performer is shown, the (disc) indicator lights up. When the track title is shown, the (track) indicator lights up. • If no name is assigned to the conventional CD, “NO NAME”...
Page 50: Dvd Setup Menu
DVD SETUP MENU AUDIO SUBTITLE DUAL ZONE ENTER MENU 2ndVOL SETUP SETUP 2ndVOL RANDOM – SHIFT You can store the initial selection for subtitle languages, audio languages, and other settings using the Setup Menu. • DVD Setup menu can only be displayed while a disc, except MP3 disc, is inserted and selected for the playback source.
Page 51 Move (cursor) to select an option. AUDIO DIGITAL AUDIO OUTPUT DISC + ANALOG DOWN MIX DISC – D. RANGE COMPRESSION Confirm and enter your selection. AUDIO ENTER DIGITAL AUDIO OUTPUT ANALOG DOWN MIX D. RANGE COMPRESSION LANGUAGE LANGUAGE MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH...
Page 52 Items MENU LANGUAGE * AUDIO LANGUAGE * SUBTITLE * ON SCREEN LANGUAGE Select the language for the Setup menu and some indications MONITOR TYPE 16:9 4:3 LB 4:3 PS • When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language.
Page 53 Items DIGITAL AUDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal on the rear. • PCM ONLY Select this when connecting an amplifier or a decoder incompatible with Dolby Digital and DTS, or connecting to a recording device.
Page 54: Sound Adjustments
SOUND ADJUSTMENTS Operations of this section are explained using the buttons on the control panel unless mentioned otherwise. Adjusting the sound You can adjust the sound characteristics to your preference. • “Vol Adj” setting is required for each source except FM. Before starting “Vol Adj,” select an appropriate source for which you want to make an adjustment.
Page 55: Selecting Preset Sound Modes (Ieq: Intelligent Equalizer)
Selecting preset sound modes (iEQ: intelligent equalizer) You can select a preset sound mode (iEQ: intelligent equalizer) suitable to the music genre. • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
Page 56: Storing Your Own Sound Adjustments
Storing your own sound adjustments You can adjust the sound modes to your preference and store your own adjustments in memory (User 1, User 2, and User 3). • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
Page 57: Other Main Functions
Operations of this section are explained using the buttons on the control panel unless mentioned otherwise. Changing the general settings (PSM) You can change the items listed in the table on pages 58 and 59 by using the PSM (Preferred Setting Mode) control.
Page 58 Preferred Setting Mode (PSM) items Indications Graphics Movie demonstration KeyIn CFM Key in confirmation Clock Hr Hour adjustment Clock Min Minute adjustment 24H/12H 24 hours or 12 hours Scroll Scroll mode Dimmer Dimmer mode From– To Dimmer time setting Contrast Contrast LCD Type Display type...
Page 59 Indications All SRC Selected source User User color selection Green Blue Displayed only when “Dimmer” is set to “Time Set.” Displayed only when “DAB AF” is set to “Off.” Displayed only when the DAB tuner is connected. Displayed only when one of the following sources is selected—FM, AM, and CD. To set the movie demonstration—Graphics When shipped from the factory, the movie has been activated.
Page 60 To adjust the display contrast level —Contrast You can adjust the display contrast level among 1 to 10. Adjust it to make the display indications clear and legible. To select the display illumination pattern —LCD Type You can select the display illumination patterns according to your preference.
Page 61: Selecting The Dimmer Mode
Selecting the dimmer mode You can dim the display at night automatically or as you set the timer. When shipped from the factory, Auto Dimmer mode is activated. Note: Auto Dimmer supplied with this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.
Page 62: Changing The Display Color
Changing the display color You can set the display color using the PSM control. You can select your favorite color for each source (or for all sources). You can also create your own colors, and set them as the display color. Setting the desired color for each source Once you have set the color for each source (or...
Page 63 Creating your own color—User You can create your own colors—“Day” and “Night,” and select them as the display color for any desired source. • Day: Can be used as your user color during the day time (while the headlights are turned off), or as set by the timer—...
Page 64: Assigning Names To The Sources
Assigning names to the sources You can assign names to CDs (both in this unit and in the CD changer), and the external component. After assigning a name, it will appears on the display when you select the source. Maximum number of Sources characters CDs*...
Page 65: Detaching The Control Panel
Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power.
Page 66: Cd Changer Operations
Operations of this section are explained using the buttons on the control panel unless mentioned otherwise. We recommend that you use the JVC MP3- compatible CD changer with your unit. By using this CD changer, you can play back your original CD-Rs (Recordable) and CD-RWs (Rewritable) recorded either in audio CD format or in MP3 format.
Page 67 • When the current disc is a CD: Playback starts from the first track of the current disc. Selected disc number Current track and elapsed playing time Note: If you change the source, CD changer play also stops. Next time you select the CD changer as the source, CD changer play starts from where playback has been stopped previously.
Page 68 This operation is only possible when using JVC MP3-compatible CD changer (CH-X1500). To go to a track quickly Press MODE (M) to enter the functions mode while playing a disc. “Mode” appears on the display. MODE Press 5 (up) or ∞ (down).
Page 69 To select a disc using the disc lists If you forget what discs are loaded in the CD changer, you can show the disc title list and select a disc in the list shown on the display. • The display can show only six disc names at a time.
Page 70: Selecting The Playback Modes
Selecting the playback modes To play back tracks repeatedly (Repeat Play) From the remote controller: REPEAT Press REPEAT ( the Repeat Play mode you want is selected. On the control panel: Press MODE (M) to enter the functions mode during play. “Mode”...
Page 71 Press number button 3 repeatedly while “Mode” is still on the display. Each time you press the button, Random Play mode changes as follows: For MP3 discs: Random Folder Random Disc Random Off Random All For CDs: Random Disc Random All Random Off Note: MP3 indicator also lights up if the current playing...
Page 72: External Component Operations
EXTERNAL COMPONENT OPERATIONS Operations of this section are explained using the buttons on the control panel unless mentioned otherwise. Playing an external component You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied).
Page 73: Dab Tuner Operations
We recommend that you use DAB (Digital Audio Broadcasting) tuner KT-DB1500 or KT-DB1000 with your unit. If you have another DAB tuner, consult your JVC IN-CAR ENTERTAINMENT dealer. • Refer also to the Instructions supplied with your DAB tuner. What is DAB system? DAB is one of the digital radio broadcasting systems available today.
Page 74: Storing Dab Services In Memory
Start searching for an ensemble. Press ¢ for ensembles of higher frequency. 4 to search for ensembles of Press lower frequency. When an ensemble is received, searching stops. To stop searching before an ensemble is received, press the same button you have pressed for searching.
Page 75: Tuning In To A Preset Dab Service
Press and hold the number button (in this example, 1) you want to store the selected service into for more than 2 seconds. The display pattern automatically changes to the non-animation display and the preset number flashes (then the previous display pattern resumes).
Page 76: What You Can Do More With Dab
Press and hold 5 (up) or ∞ (down) until the preset ensemble (primary service) list for the current band (DAB1, DAB2, or DAB3) appears on the display. Note: You can show the other DAB band preset ensemble (primary service) lists (DAB1, DAB2, or DAB3) by pressing 5 (up) or ∞...
Page 77: Changing The Display Information
Note: When Alternative Reception (for DAB services) is activated, Network-Tracking Reception (for RDS stations: see page 17) is also activated automatically. On the other hand, Network-Tracking Reception cannot be deactivated without deactivating Alternative Reception. Changing the display information By pressing DISP (D), you can change the information shown on the display.
Page 78: Additional Information
ADDITIONAL INFORMATION Sound modes (preset frequency level settings) The list below shows the preset frequency level settings for each sound mode. • You can adjust the preset sound modes temporarily. However, your temporary adjustments will be reset when you select another sound mode. Sound Mode 60 Hz...
Page 79: Language Codes
Code Language Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish Bhutani Greek Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian...
Page 80: Glossary
Digital multi-channel processor or amplifier. Dolby Digital can deliver from mono up to 5.1 discrete channels of excellent sound quality. The KD-DV5000 automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-channel listening. An additional Dolby Digital decoder or amplifier is required to reproduce the discrete multi-channel sound encoded in many DVDs.
Page 81: Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms • Sound cannot be heard from the speakers. • This unit does not work at all. • “Panel Connect Error” appears on the display. •...
Page 82 Symptoms • Sound and picture are sometimes interrupted or distorted. • “No Disc” flashes on the display. • No playback picture (DVD, VCD) appears on the monitor. • No picture appears on the monitor at all. • The left and right edges of the picture are missing on the screen.
Page 83 Symptoms • “No Disc” flashes on the display. • “No Magazine” flashes on the display. • “Reset 8” flashes on the display. • “Reset 1” – “Reset 7” flashes on the display. • The CD changer does not work at all. Output signals through the DIGITAL OUT terminal They differ depending on the “DIGITAL AUDIO OUT”...
Page 84: Maintenance
MAINTENANCE Handling discs This unit has been designed to reproduce DVD- Videos, VCDs, CDs, CD-Rs (Recordable), CD- RWs (Rewritable), and CD Texts. • This unit is also compatible with MP3 discs. How to handle discs When removing a disc from its case, press down the center holder of the case and lift the disc out, holding it by the edges.
Page 85: Specifications
AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): 19 W per channel into 4 Ω, 40 Hz Front: to 20 000 Hz at no more than 0.8% total harmonic distortion. 19 W per channel into 4 Ω, 40 Hz Rear: to 20 000 Hz at no more than...
Page 86 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à...
Page 87: Problemen Oplossen
KD-DV5000 Installation/Connection Manual Einbau/Anschlußanleitung Manuel d’installation/raccordement Handleiding voor installatie/aansluiting LVT1054-004A DEUTSCH ENGLISH • Dieses Gerät ist für einen Betrieb in • This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. elektrischen Anlagen mit 12 V Gleichstrom und (–) Erdung ausgelegt.
Page 88 Neem bij vragen of voor meer bijzonderheden over inbouwpakketten contact op met uw JVC car audio dealer of een dealer of een bedrijf dat inbouwpakketten levert.
Page 89: Electrical Connections
• Die Sicherung mit einer der entsprechenden your JVC IN-CAR ENTERTAINMENT dealer. Nennleistung ersetzen. Brennt die Sicherung • If noise is a problem... häufig durch, wenden Sie sich an ihren JVC This unit incorporates a noise filter in the Autoradiohändler. power circuit. However, with some vehicles, •...
Page 90 Wenn Sie KV-MR9000 und KS-HP1K von JVC benutzen, so verwenden Sie ein Konvertierungskabel dieses Typs (nicht mitgeliefert). Lors de l’utilisation du KV-MR9000 et du KS-HP1K de JVC, connectez en utilisant un câble de conversion de ce type (non fourni). Sluit via een conversiekabel van dit type (niet meegeleverd) aan wanneer u JVC’s KV-MR9000 en KS-HP1K gebruikt.
Page 91 Finalement, connectez le faisceau de fils à l’appareil. We recommend you to connect the JVC MP3 compatible CD changer. You can also connect other CH-X series CD changers (except CH-X99 and CH-X100). • You cannot use the KD-MK series CD changers with this unit.
Page 92 If your car is equipped with the steering wheel remote controller, you can operate this receiver using the controller. To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required. Consult your JVC IN-CAR ENTERTAINMENT dealer for details.
Page 93 A Guide to MP3 What are MP3? MP3 (MPEG Audio Layer 3) is one of digital audio compression standards. • This player cannot play back MP3i and MP3 PRO formats. About Tag of MP3 This player can show the names of albums, artists (performer), and tracks of MP3 Tag.
Page 94 Multiple session A CD-writing method, which make it possible to add data on a CD-R/RW after closing a session. ‡ : Compatible KD-DV5000 MP3 playback CD-DA playback CD-DA playback CD-DA playback Up to 31 characters Not available...

JVC KD-DV5000 Instructions Manual

Location of the Buttons

Basic Operations

Radio Operations

Rds Operations

Playable Discs

Basic Disc Playback

DVD/VCD Special Functions

Advanced Disc Operations

Osd Disc Operations

Dual Zone Operations

Other Disc Operations

DVD Setup Menu

Sound Adjustments

Other Main Functions

CD Changer Operations

External Component Operations

Dab Tuner Operations

Additional Information

Language Codes

Glossary

Troubleshooting

Maintenance

Specifications

Quick Links

Related Manuals for JVC KD-DV5000

Summary of Contents for JVC KD-DV5000

Table of Contents