Table of Contents
Advertisement
Statement 1
DANGER
Electrical current from power, telephone and communication cables is hazardous.
To avoid a shock hazard:
v Do not connect or disconnect any cables or perform installation,
v Connect all power cords to a properly wired and grounded electrical outlet.
v Connect to properly wired outlets any equipment that will be attached to
v When possible, use one hand only to connect or disconnect signal cables.
v Never turn on any equipment when there is evidence of fire, water, or
v Disconnect the attached power cords, telecommunications systems,
v Connect and disconnect cables as described in the following table when
42
IBM EXP400 Storage Expansion Unit Type 1733: Hardware Maintenance Manual and Troubleshooting Guide
maintenance, or reconfiguration of this product during an electrical storm.
this product.
structural damage.
networks, and modems before you open the device covers, unless
instructed otherwise in the installation and configuration procedures.
installing, moving, or opening covers on this product or attached devices.
To Connect
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
To Disconnect
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
Advertisement
Table of Contents
