Related Manuals for Electrolux T5190
Summary of Contents for Electrolux T5190
-
Page 1: Tumble Dryer
GB, IE Operating manual Tumble dryer T5190 Type N1190.. 438 9096-20/EN 2013.03.08 Original instructions... -
Page 3: Table Of Contents
Contents Contents 1 Safety Precautions ......................5 1.1 Symbols........................6 2 Program description ......................7 2.1 General........................7 2.2 Program description ....................7 2.3 Option buttons ......................10 3 Handling ..........................11 3.1 Load..........................11 3.2 How to start the machine.................... 12 3.2.1 Panel with buttons and control knob .............. -
Page 5: Safety Precautions
Safety Precautions 1 Safety Precautions This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. -
Page 6: Symbols
Safety Precautions Gas heated tumble dryer: Before installation, check that the local distribution conditions, nature of gas and pressure and the adjustment of the appliance are compatible. The machine is not to be installed in rooms containing cleaning machines with perchloroethylene, TRICHLOROETHYLENE or CHLOROFLUOROCONTAINING HYDROCARBONS as cleaning agents. -
Page 7: Program Description
Program description 2 Program description 2.1 General The machine is equipped with a number of programs adapted to the range of use to which the machine is intended — different markets use different programs. The following program description is a short description of some examples of programs that can be used. For a complete and detailed information about the all the available drying programs, please refer to ELS web-site. - Page 8 Program description The following table shows some examples of different programs that are used for special markets such as hospitals, restaurants, camping sites etc. and a short description of those: Automatic programs Description NORMAL Denim and terry. EXTRA DRY The program will stop when set dryness is achieved. Viscose and polycotton.
- Page 9 Program description The following table shows some examples of available programs used on coin operated machines and a short description of those: Time programs Description HIGH Cotton and terry. The program will stop when the time is up. MEDIUM Cotton and terry. The program will stop when the time is up.
-
Page 10: Option Buttons
Program description 2.3 Option buttons The machine is equipped with a number of options adapted to the range of use to which the machine is intended — different markets use different options. The following table shows some examples of available options and a short description of those: Option button Description ECO PROGRAM... -
Page 11: Handling
Handling 3 Handling Load the goods into the machine according to recommendations and close the door. Make sure the filter is clean and clean if necessary. ① fig.7361 3.1 Load The maximum load is 10.6 kg. -
Page 12: How To Start The Machine
Handling 3.2 How to start the machine This manual cover different types of machine models. Check the panel on your machine and follow the description for your type of machine. 3.2.1 Panel with buttons and control knob Select program: Automatic programs Select program by turning the control knob. - Page 13 Handling Time programs Select program by turning the control knob. Example of programs NORMAL NO HEATING Note! For Time programs no options are available. Start the machine by pressing the control knob. After start it is possible to change the time for the selected program. Turn the control knob to set the desired time.
-
Page 14: Panel Without Buttons
Handling 3.2.2 Panel without buttons Select program: Automatic programs Select program by turning the control knob. Example of programs NORMAL EXTRA DRY EXTRA DRY NORMAL NORMAL IRON DRY IRON DRY Start the machine by pressing the control knob. - Page 15 Handling Time programs Select program by turning the control knob. Example of programs NORMAL NO HEATING Start the machine by pressing the control knob. After start it is possible to change the time for the selected program. Turn the control knob to set the desired time.
-
Page 16: Coin Operated Machines
Handling 3.2.3 Coin operated machines 3.2.3.1 Panel without buttons Select program by turning the control knob. Example of programs HIGH MEDIUM NO HEATING Insert correct amount of coins to start the machine. After start it is possible to change the time for the selected program. Insert more coins to add time. - Page 17 Handling 3.2.3.2 Panel without control knob Select program by pressing the temperature button. Example of programs HIGH MEDIUM NO HEATING Insert correct amount of coins and press the start button to start the machine. After start it is possible to change the time for the selected program. Insert more coins to add time.
-
Page 18: Additional Functions
Handling 3.3 Additional functions There is a menu with additional functions available for selection after start. When pressing the control knob / start button (on machines without control button) the menu will appear on the display. Select from the menu by turning the control knob / pressing the temperature button/-s and press the control knob / start button to activate. -
Page 19: When Program Has Ended
Handling 3.4 When program has ended Note! For the best possible drying result it is important to empty the machine as soon as the program has ended. If the machine is not emptied as soon as the program has ended the drum will rotate in short intervalls in order to keep the goods from being wrinkled. -
Page 20: Error Codes
Error codes 4 Error codes A fault in the program or in the machine is indicated by an error code on the display. Some of these error codes can be solved easily without contacting service personnel. Error Text Cause/Action code DRYING ERROR WITH 12:11 The longest permitted RMC time has been exceeded. -
Page 21: Maintenance
Maintenance 5 Maintenance 5.1 General It is the responsibility of the owner of the machine/the laundry manager to make sure that the following maintenance is performed. Note! Lack of maintenance may deteriorate the performance of the machine and may cause damage to components. -
Page 22: Every Day
Maintenance 5.3 Every day Check that the machine does not operate with the door open, if so, the machine must be placed out of order until repairs are made. Note! Contact qualified service personnel to disconnect power from the affected machine. Clean the door, door gasket and other external parts. -
Page 23: Fresh Air Intake And Fan Motor
Maintenance 5.4 Fresh air intake and fan motor At regular basis, check that the fresh air intake on the front of the machine is not clogged by lint and dust or otherwise blocked. Disconnect the power to the machine. Remove the screws to the filter (A) and clean the fresh air inlet and the fan motor with a vacuum cleaner. - Page 24 Electrolux Laundry Systems Sweden AB 341 80 Ljungby, Sweden www.electrolux.com/laundrysystems Share more of our thinking at www.electrolux.com...