Table of Contents
Advertisement
CD changer
After pressing CD-DISC, you can perform the following operations
on a CD changer:
3:
Start playing.
4:
Return to the beginning of the current (or previous)
track.
¢:
Skip to the beginning of the next track.
7:
Stop playing.
8:
Pause playing. To resume, press 3.
1 – 6, 7/P:
Select the number of a disc installed in a CD
changer.
After pressing CD, you can perform the following operations on a
CD changer:
1 – 10, +10: Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Example:
• Selecting disc number 4, track number 12, and starting playback.
1
Press CD-DISC, then press 4.
2
Press CD, then press +10, 2.
If your CD changer is of 200-disc loading capability (except for
XL-MC100 and XL-MC301), you can do the following operations
using the number buttons after pressing CD.
1
Select a disc number.
2
Then select a track number (always enter two digits).
Press 3 to start playback.
3
Examples:
• Selecting disc number 3, track number 2, and starting playback.
Press 3, then, 0, 2, then 3.
• Selecting disc number 10, track number 5, and starting playback.
Press 1, 0, then, 0, 5, then 3.
• Selecting disc number 105, track number 12, and starting
playback.
Press 1, 0, 5, then 1, 2, then 3.
Note:
It is required to press each button within 4 seconds in the above
procedure.
Operating Video Components
VCR
You can always perform the following operations:
STANDBY/ON
VCR:
VCR CH +/–:
Change the TV channels on the VCR.
After pressing VCR, you can perform the following operations on
the VCR:
3:
Start playing.
REW:
Rewind the tape.
FF:
Fast-forward the tape.
7:
Stop playing, recording, rewind and fast forward.
8:
Pause playing and recording. To resume, press 3.
REC PAUSE: Enter recording pause.
To start recording, press this button then 3.
DVD player
You can always perform the following operation:
STANDBY/ON
DVD:
After pressing DVD, you can perform the following operations on
the DVD player:
3:
Start playing.
4:
Return to the beginning of the current (or previous) chapter.
¢:
Skip to the beginning of the next chapter.
7:
Stop playing.
8:
Pause playing. To resume, press 3.
After pressing DVD, these buttons
can be used for the DVD menu
operations.
Note:
For detailed menu operations, refer to
the instructions supplied with the discs
or the DVD player.
TV
You can always perform the following operations:
STANDBY/ON
TV: Turn on or off the TV.
TV CH +/–:
Change the channels.
TV VOLUME +/–:
Adjust the volume.
TV/VIDEO:
Set the input mode (either TV or VIDEO).
After pressing TV SOUND, you can perform the following
operations on the TV:
1 – 9, 0, 100+ (+10): Select the channels.
RETURN (10):
Alternate between the previously selected
channel and the current channel.
Turn on or off the VCR.
Turn on or off the DVD player.
2
4
6
MENU
7/P
8
ENTER
10
29
Hide quick links:
Advertisement
Table of Contents
