Table of Contents
Advertisement
3
3
1
edition (08-2010) _Rev. 11-2010
st
SETTINGS AND ADJUSTMENTS
Shock absorber spring preload adjustment (TE-TC-TXC)
Proceed as follows:
1. Remove the saddle and right-hand side panel, as described in the relevant
2. Clean lock ring nut (1) and adjuster ring nut (2) of the spring (3).
3. Either with a hook wrench or an aluminium punch, loosen the lock ring nut.
4. Turn the adjuster ring nut as required.
5. Adjust preload to suit your weight or riding style and tighten the lock ring nut
2
6. Refit the right-hand side panel and the saddle.
1
A
B
A = Spring standard length, when preloaded
B = Free length = 451.5 mm (17.78 in)
H006158
1
2
H006159
paragraph.
firmly (tightening torque 10 Nm - 1 Kgm - 7.38 ft-lb).
Be careful not to touch hot exhaust pipe while adjusting the shock absorber.
Maximum length = 453 mm (17.83 in)
Minimum length = 323 mm (12.72 in)
D.21
- Quick Links:
- Engine
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
