Table of Contents
Advertisement
Connections
The COAX-SSP converter can be secured by using bolts (M4) or nuts (M4) as described below.
Installation example 1 (using bolts)
Insert bolts into each of the two grooves on both sides of the converter.
2
Installation example 2 (using nuts)
Insert nuts into each of the two grooves on both sides of the converter.
However, if using threaded fasteners such as bolts to secure the converter, select bolts which will not go
any more than 5 mm past the surface of the converter. If longer bolts are used, they may damage the
converter.
2
Note: Parts such as the bolts and nuts required above are not supplied with the converter and must be
purchased separately.
English
Bolt (M4)
1
Nut (M4)
1
– 5 –
Advertisement
Table of Contents
