Introduction Thank you for purchasing the ScanSnap! fi-4110EOX2 Adobe, the Adobe logo, and Acrobat are either registered trademarks of Adobe Systems Duplex Color Scanner product. Incorporated in the United States and/or other ScanSnap! fi-4110EOX2 comes with a color image scanner countries.
Bescheimigung des Herstellers / Regulatory Information Importeurs FCC declaration Hiermit wird bescheinigt, daß der/dieldas This equipment has been tested and found to fi-4110EOX2 comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits •...
The user must not perform repairs on this scanner. required by local ordinances or regulations. Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner service provider to make repairs to this product. Conventions Warning Indications Used In This Manual...
Make sure that the smoking has stopped, and then contact the store where you bought the scanner or Do not place heavy objects on the scanner or use an authorized FUJITSU scanner service provider. the scanner's top surface for performing other work. Improper installation might cause injuries.
1. Preparation This chapter describes preparations you must perform before you start using ScanSnap! product. Rear Side Don’t connect the scanner to your computer ATTENTION before installing “ScanSnap! Driver”. If the scanner is connected before installing ScanSnap! Driver, it will not operate normally.
2. Connecting ScanSnap! This chapter describes how to connect ScanSnap! product Select [Acrobat 5.0] button and then click the [Install to your computer. Adobe Acrobat 5.0] button. Before you connect ScanSnap! scanner, install the supplied ® ® programs (Adobe Acrobat , ScanSnap! Driver and CardMinder) on your computer 2.1.
2.2.2. Connecting the USB cable The setup window appears. Follow the instructions on the window. Use the following procedure to connect the USB cable. During installation, the following window HINT ● Use the accessory USB cable. Operation appears ATTENTION with a commercially available USB cable is not guaranteed.
3. How to Use ScanSnap! This chapter describes basic ScanSnap! operation. [Save] Specify the folder and file name to save the scanned 3.1. Scanning Documents with images. ScanSnap! [Scanning] Specify the quality of the scanned image. With “ScanSnap!” scanner, by pressing just one button, [File option] you can scan and save documents as a file.
Using Outlook as an example, after confirming 3.4. Scanning Business Cards business card data, select the cards that you want to export to Outlook. Click the [Microsoft Outlook] Select “CardMinder” on the [Application] tab of button on the Toolbar. The data is exported to “Scan and Save Settings”.
Before you ask for repair service, check the following items. If you cannot solve the problem after checking the following items, contact the store where you purchased this product, or contact an authorized FUJITSU scanner service provider. Symptom Check This Item Remedy Scanner does not turn on.
Symptom Check This Item Remedy The image is printed white or dark. In Black &White (B&W) scanning, Adjust "Brightness" at [Scanning] - is [Option...] - “Brightness” in the [Option...] in the "Scan and Save [Scanning] tab set extremely Light or Settings"...
5. Replacing Consumables This chapter describes how to replace consumables. 5.2. Replacing the Pad ASSY Replace the Pad ASSY by the following procedure. WARNING Fire/Electric Shock Remove the document if there is a document in the ADF paper chute. Before you replace consumables on the scanner, disconnect the AC adapter to turn off the scanner.
Claw Push in the center of the ADF to return it to its original position. Handle Replace shaded part. Push in center. You should hear the ADF click when it returns to its When attaching a new Pick roller, insert the Pick original position.
Lint-free dry cloth Commercially available one. (*2) use of the scanner. *1) To purchase the cleaning material, contact the FUJITSU Before you start to clean inside the scanner, disconnect scanner dealer where you purchased the scanner. the AC adapter from the outlet, and wait at least 15 *2) Any lint-free cloth can be used.
Page 17
Pad ASSY Push in the center of the ADF to return it to its original position. Clean the Pad ASSY top down (in the direction of the arrow). When cleaning the Pad ASSY, take care to prevent the cloth from catching on the pick arm or pick spring.