Table of Contents
Advertisement
fcp1mst.book Page 1 Wednesday, June 2, 1999 4:02 PM
Chapter 2. Windows 95 and
Windows 98 Installation
Plug and Play Installation
Most CardBus-enabled computers support plug and play installa-
tion of the EtherJet CardBus Adapter under Windows 95 and
Windows 98. However, early versions of Windows 95 (950 or
950a) require manual installation. Both types of installation are
described in this chapter. Troubleshooting and keyword informa-
tion is also provided.
Drivers Available
The following drivers for Windows 98 and Windows 95 are sup-
plied with the EtherJet CardBus Adapter:
• An NDIS3 driver (IBMC.SYS)
• An NDIS4 driver (IBMCN4.SYS)
• A 32-bit ODI driver (IBMC.LAN) with promiscuous support
To install the NDIS3 driver IBMC.SYS, use the procedures
described in this chapter.
For NDIS4 instructions, see the README.TXT file on the IBM
CD-ROM.
If your environment requires use of the 32-bit ODI client driver
under Windows 95 (as indicated by your network administrator),
see the Windows Help file HELPDOCS.HLP on the IBM
CD-ROM.
How to Create Diskettes for Software
Installation
To create a set of diskettes for use in installation, as an alternative
to using the IBM CD-ROM, run MAKEDISK.BAT from the IBM
CD-ROM to copy the required installation files to two blank disk-
ettes.
© IBM Corporation, 1998
2-1
Advertisement
Table of Contents
Troubleshooting
