Advertisement
Adjust the image
1
Press the Pattern button on the remote control to display a test pattern.
2
To raise the image or correct a tilted image, adjust the front feet as
shown below.
3
Press the Lens button on the remote control and use the
to focus the image.
4
Press the Lens button on the remote control again and use the
buttons to reduce or enlarge the image.
5
Press the Lens button on the remote control again and use the
and
buttons to reposition the image.
6
If your image looks like
or
projector to correct this.
Note: Using the keystone adjustment can affect the size and effective
resolution of your image. If possible, change the position of your
projector to eliminate the keystone effect and use the lens shift option to
position the image as necessary.
and
buttons
and
,
, you can use the
button on the
Viewing 3D images
To view 3D content, you must first connect a 3D-compatible video device to
one of the HDMI ports on your projector.
1
Turn on and begin playback on the 3D-compatible video device.
Note: Make sure you set the video device to play content in 3D mode.
2
Press the 2D/3D button on the remote control, if necessary.
3
Slide the power switch on your 3D glasses to the On position.
Note: If the glasses don't automatically display 3D content, you may
need to pair them with the projector. Move the glasses within 10 feet
(3 m) of the projector, then press and hold the Pairing button on the
3D glasses for at least 3 seconds. The status light on the glasses will
alternately flash green and red, then remain green for 10 seconds if
pairing is successful.
You can also automatically convert 2D HDMI content to 3D. To enable the
2D-to-3D Conversion option, press the Menu button on the projector or
remote control. Select Signal and press Enter, then select 3D Setup and
,
press Enter. Select 2D-to-3D Conversion and press Enter. Select the Weak,
Medium, or Strong setting, then press Enter.
See the online User's Guide for more information on adjusting 3D images.
Troubleshooting
If you see a blank screen or the No signal message after turning on your
video device or computer, check the following:
•
Make sure the power light on the projector is blue and not flashing.
•
Press the
the remote control to switch to the correct image source, if necessary.
•
If you're using a Windows
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•
If you're using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
checkbox.
If 3D images aren't displaying properly, check the following:
•
Press the 2D/3D button to switch to 3D viewing mode, if necessary.
•
Make sure that you are within the 3D viewing range. See "Choose a
location" on the front of this sheet or the online User's Guide for more
information.
button on the projector or one of the Source buttons on
laptop, press the function key on your
®
. You may have to hold down the
Advertisement
