Pauses In Use; Setting Down, Transportation And Storage; Parking System For Pauses In Vacuuming; Parking System For Storage - Miele HS14 Operating Instructions Manual
Hide thumbs
Also See for HS14:
- Manual (125 pages) ,
- Operating instructions manual (124 pages) ,
- Operating instructions manual (29 pages)
Table of Contents
Advertisement
Available languages
Available languages
en
Pauses in use (Abb. 23)
To pause the vacuum cleaner during
operation:
^ Press the stand-by button - on the
handle.
,
Warning: The stand-by button is
designed to pause the vacuum
cleaner for short periods of time
whilst vacuuming. After vacuuming,
the vacuum cleaner must be
switched off and unplugged from
the mains electricity supply.
Otherwise there is a danger of
overheating and damage.
At the end of the pause, you can do
one of the following:
^ Press the stand-by button - again to
switch the vacuum cleaner back on
at the setting you were using before
pausing it.
^ Press the + button to switch the
vacuum cleaner back on using the
maximum power setting.
^ Press the - button to switch the
vacuum cleaner back on using the
minimum power setting.
Setting down, transportation
and storage
Parking system for pauses in
vacuuming (dia. 26)
The parking system allows you to
conveniently park the vacuum cleaner
during pauses.
^ Slot the floorhead into the parking
attachment at the back of the
vacuum cleaner.
38
If the vacuum cleaner is on a
sloping surface, e.g. a ramp, retract
the telescopic tube fully.
Parking system for storage (dia. 27)
,
Warning. Always disconnect the
vacuum cleaner from the electrical
supply when you have finished
using it. Switch the vacuum cleaner
off at the wall socket and unplug it.
^ Stand the vacuum cleaner upright
when it is not being used and when it
is being stored.
Retract the telescopic tube fully.
^ Then slot the floorhead downwards
into one of the parking attachments
on the side of the vacuum cleaner.
This makes the vacuum cleaner easier
to carry or store.
Maintenance
,
Warning: Always disconnect the
vacuum cleaner from the electrical
supply for maintenance work and for
cleaning. Switch off at the wall
socket and unplug it.
The Miele filtration system consists of
three filters which must be replaced
from time to time to ensure that your
vacuum cleaner performs efficiently.
– Dustbag
– Dust compartment filter (for motor
protection)
– Exhaust filter
Advertisement
Chapters
Table of Contents
