Upgrade/Backup Firmware/Language - Cisco Small Business 200 Series Administration Manual
Small business 200 series smart switch
Hide thumbs
Also See for Small Business 200 Series:
- User manual (428 pages) ,
- Administration manual (202 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Administration: File Management
Upgrade/Backup Firmware/Language
Upgrade/Backup Firmware/Language
The
Upgrade/Backup Firmware/Language
•
Upgrade or backup the firmware image.
•
Upgrade or backup the boot code.
•
Import or upgrade a second language file.
The following methods for transferring files are supported:
•
HTTP/HTTPS that uses the facilities provided by the browser
•
TFTP that requires a TFTP server
•
Secure Copy Protocol (SCP) that requires an SCP server
If a new language file was loaded onto the device, the new language can be selected from the drop-down
menu. (It is not necessary to reboot the device).
A single firmware image is stored on the device. After new firmware has been successfully loaded into the
device, the device must be rebooted prior to the new firmware taking effect. The Summary page continues
to show the previous image prior to the reboot.
Upgrade/Backing Firmware or Language File
To upgrade or backup a software image or language file:
STEP 1
STEP 2
•
If you selected TFTP, go to
•
If you selected via HTTP/HTTPS, go to
•
If you selected via SCP, go to
STEP 3
Select one of the following Save Action::
•
Upgrade—Specifies that the file type on the device is to be replaced with a new version of that file
type located on a TFTP server.
Cisco Small Business 200 Series Smart Switch Administration Guide
process can be used to:
Click Administration > File Management > Upgrade/Backup Firmware/
Language.
Click the Transfer Method. Proceed as follows:
STEP
3.
STEP
5.
If you selected via TFTP, enter the parameters as described in this step.
Otherwise, skip to
STEP
STEP
4.
4.
5
38
Hide quick links:
Advertisement
Table of Contents
