Dell Networking 2024 Reference Manual page 1561

Hide thumbs Also See for Networking 2024:

Table of Contents

show sdm prefer {dual-ipv4-and-ipv6 |ipv4-routing} {default|data-center}

dual-ipv4-and-ipv6 default—List the scaling parameters for the template

supporting IPv4 and IPv6.

ipv4-routing default—List the scaling parameters for the IPv4-only

template maximizing the number of unicast routes.

ipv4-routing data-center—List the scaling parameters for the IPv4-only

template supporting more ECMP next hops.

dual-ipv4-and-ipv6 data-center—List the scaling parameters for the

template supporting IPv4 and IPv6 with higher scale ECMP next hops.

Default Configuration

The default template for the N4000 switch is

default template for the N3000 switch is the

The default template for the N2000 is

has limited routing functionality.

Command Mode

Privileged EXEC, Configuration mode and all Configuration submodes

User Guidelines

When invoked with no optional keywords, this command lists the currently

active template, and the template that will become active on the next reboot,

if it is different from the currently active template. If the system boots with a

non-default template, and you clear the template configuration, either using

the no sdm prefer command or by deleting the startup configuration, the

show sdm prefer command lists the default template as the next active

template. To list the scaling parameters of a specific template, use that

template's keyword as an argument to the command.

The following table lists the completion messages.

dual-ipv4-and-ipv6 default

dual-ipv4-and-ipv6 data-center

dual-ipv4-and-ipv6 default

SDM Templates Commands

Chapters

Table of Contents