Table of Contents
Advertisement
TC-P42GT30A
8.12. Remove the Stand bracket
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Unlock the cable clampers to free cable.
3. Remove the Stand bracket fastening screws (×9
) and the Stand bracket.
8.13. Remove the K-Board
1. Remove the SP shield metal L. (See section 8.11.)
2. Remove the Stand bracket. (See section 8.12.)
3. Remove the screw (×1
4. Remove the claws (×3
5. Disconnect the connector (K1) and remove the K-Board
from the LED panel.
8.14. Remove the S-Board
1. Remove the SP shield metal L. (See section 8.11.)
2. Remove the screws (×2
3. Disconnect the connector (S10) and remove the S-Board.
).
).
).
8.15. Remove the V-Board
1. Remove the SP shield metal R. (See section 8.11.)
2. Remove the Stand bracket. (See section 8.12.)
3. Remove the screw (×1
).
4. Disconnect the connector (V14) and remove the V-Board
, ×4
from the 3D emitter panel.
8.16. Remove the Bottom cabinet
assy
1. Remove the Speakers. (See section 8.11.)
2. Remove the Stand bracket. (See section 8.12.)
3. Remove the K, S and V-Board. (See section 8.13 - 15.)
4. Remove the screws (×2
inet assy.
24
) and remove the claws (×3
) and remove the Bottom cab-
Hide quick links:
Advertisement
Table of Contents
