Table of Contents
Advertisement
B Preparation
Connecting the Projector
Notes
• Make sure all the equipment is powered off when connecting the projector.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or
cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you are connecting.
• Use a no-resistance audio cable.
Connecting a Computer
Connection with a computer is explained for each input signal.
INPUT A/INPUT B
For connecting a computer with an RGB output connector.
Computer
Notes
• The audio input connector is available only on VPL-EW295/EW255/EW235/EX295/EX255/
EX235.
• It is recommended that you set the resolution of your computer to 1280 × 800 pixels (VPL-EW295/
EW255/EW235) or 1024 × 768 pixels (VPL-EX295/EX290/EX255/EX250/EX235/EX230) for
the external monitor.
INPUT C
For connecting a computer with an HDMI output connector.
Computer
Mini D-sub 15-pin cable (supplied)
RGB output
connector
Audio output
connector
Audio cable (Stereo mini plug)
(not supplied)
HDMI cable
(not supplied)
HDMI output
connector
Connecting the Projector
9
- Quick Links:
- Indicators
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
