Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
Page 3
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCO-2081R SERIES • NTSC MODEL • PAL MODEL SCO-2081RN SCO-2081RP • POWER SOURCE SCO-2081RN, SCO-20801RP : AC24V, DC12V...
Safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
Page 5
fire or electric shock. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
Safety information FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.
15.This product is intended to be supplied by a Listed Power Supply Unit marked "Class2" and rated from 24 Vac (50 or 60) Hz or 12 Vdc, min.0.5A . Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents...
Contents INTRODUCTION Features What’s included Component names and Functions Adjust the lens's zoom and focus CONNECTION Connecting to Monitor Connecting to Power Function jack Using coaxial communications SETUP Menu Confi gration Menu Setup TROUBLESHOOTING Troubleshooting SPECIFICATIONS Specifi cations Dimension 8_ Contents...
Outdoor Visibility range 50M The IR LEDs of the SCO-2081R automatically illuminates viewing area in the extreme darkness allowing the camera a long-range visibility of up to 50 meters. IP66 Approved/Dust and Rain Resistant With dust and rain resistant design, the camera can be installed outside under building eaves or places that are exposed to the dust and rain.
Page 10
- PAL : English, French, German, Spanish, Italian, Chinese, Russian, Polish, Czech, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese WHAT’S INCLUDED Check if the following items are included in the product package. Sunshield Adaptor (1EA) SCO-2081R Sunshield High Resolution weatherproof IR Camera...
COMPONENT NAMES AND FUNCTIONS Front ❶ Camera Sunshield ➋ Sunshield adaptor : Fixing the sunshield onto the camera. ➌ Focus lever : Set focus of lens by turn the focus lever. ➍ Zoom lever : Set zoom magnification of lens by turn the zoom lever. ➎...
Page 12
Introduction Back ➒ ➑ ➑ Function jack : It contains RS-485 communication jack, ALARM OUT, EXT_D/N input and GND. ➒ Video output jack : Video signals are output through this port. Connect this port to the Video IN port of a monitor. ❿...
Page 13
ADJUST THE LENS'S ZOOM AND FOCUS Remove the sunshield from the camera. Remove the front cover from the camera by turning it counterclockwise. Unlock the Zoom or Focus lever before adjusting the lens. Adjust the zoom & focus by moving the lever counterclockwise for (NEAR & TELE) and clockwise for (WIDE &...
Connection CONNECTING TO MONITOR Please connect the Video output jack located on the back of the camera to the monitor. Monitor The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument. Please turn off the power when connecting.
Page 15
YELLOW (485+) BLUE (ALARM OUT) GRAY (EXT_D/N IN) BLACK (GND) GREEN (485-) & YELLOW (485+) CONNECTING TO RS-485 CONTROL CAB LE Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG TECHWIN System Controller or DVR. English_15...
8-N-1 ENABLE When making a control system to control the camera, please use to the protocol SAMSUNG-T, SAMSUNG-E, PELCO-D , PELCO-P, BOSCH, HONEYWELL, VICON, PANASONIC, GE, AD. When you connecting to RS-485 CONTROL TERMINAL, please peel off the outer skin inside the RS-485 CONTROL TERMINAL.
Page 17
ALARM NETWORK BACKUP ZOOM FREEZE BACKUP SEARCH TELE WIDE VIEW PRESET MODE AUDIO ALRAM MENU DVD RECORDER OPEN/CLOSE RETURN : BNC • • ---- : RS-485 - Video Cable The camera’s video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp.
Setup MENU CONFIGRATION MAIN SETUP ● LENS ● ● ● BRIGHTNESS SHUTTER EXPOSURE ● ● SENS-UP RETURN ● ● ● AUTO MANUAL DEFOG ● ATW ● OUTDOOR ● INDOOR WHITE BAL ● MANUAL ● AWC SET ● ● ● BACKLIGHT USER BLC ●...
Page 19
MAIN SETUP 1.LENS Select the function using Change the status 2.EXPOSURE the Function Setup switch. using the Function Setup switch. DEFOG WHITE BAL BACKLIGHT SSNR3 DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE Select a desired function using the Function Setup switch. Place the cursor over a desired item. Set up a selected item by using the Function Setup switch.
Page 20
Setup EXPOSURE 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Function Setup switch so that the arrow indicates 'EXPOSURE'. Select a desired mode using the Function EXPOSURE SETUP Setup switch. 1.BRIGHTNESS IIIIIIIII IIIIIIII BRIGHTNESS : Adjusts the video brightness. 2.SHUTTER ...
Page 21
White Balance operation may become unstable. BACKLIGHT The SCO-2081R is designed to deliver a distinctive subject and background at the same time, even when the subject is backlight, by adopting a function of the proprietary W6 DSP chip.
Page 22
Setup 2. Select a desired mode using the Function Setup switch depending on the camera purpose. USER BLC : Enables a user to directly BLC SETUP select a desired area from a 1.LEVEL MIDDLE picture, and to view the area 2.TOP ...
Page 23
DAY/ NIGHT You can display pictures in color or black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up and Down buttons so that the arrow indicates ‘DAY/NIGHT’. 2. Select a desired mode using the Left and Right buttons according to the picture display you want.
Page 24
Setup SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. 2. Select a desir ed mode using the Function Setup switch. COAX SSDR 8.COMM ADJ 9.RETURN ...
Page 25
: You can select the menu language according to your requirements. LANGUAGE RUTURN : Select this to save the menu settings and return to the SPECIAL menu. CAM TITLE : If you enter a title, the title will appear on the monitor. ➊...
Page 26
Setup PRIVACY : Mask an area you want to hide on the screen. ➊ When the SPECIAL menu screen is displ- PRIVACY AREA SETUP ayed, press the Function Setup switch so 1.AREA AREA1 that the arrow indicates ‘PRIVACY’. 2.MODE ➋...
Page 27
When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode. COAX : COAX option is set to "On" will specify the use of coaxial communication. SSDR(Samsung Super Dynamic Range) SSDR illuminates darker areas of an image while...
Page 28
DISP ID : Display camera ID on top left corner of the screen. PROTOCOL : You can select one of various protocols. SAMSUNG-T, SAMSUNG-E, PELCO-D , PELCO-P, BOSCH, HONEYWELL, VICON, PANASONIC, GE, AD.
Troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. SOLUTION PROBLEM Check that the power cord and line connection between the Nothing appears on the screen.
Specifications SPECIFICATIONS SCO-2081RN SCO-2081RP Video Imaging Device 1/3” Super HAD CCD (Double Scan) Total Pixels 1020(H) x 508(V) 1020(H) x 596(V) 976(H) x 494(V) 976(H) x 582(V) Effective Pixels Scanning System 2:1 Interlace Synchronization Internal / Line Lock Frequency H : 15.734KHz V:59.94Hz H: 15.625KHz V: 50.00Hz Horizontal Resolution 700 TV lines ( ER Mode ), B/W:700 TV Line...
Page 31
Communication Coaxial Control ( SPC-300 Compatible ), RS-485 Coax : Pelco-C ( Coaxitron ) Protocol RS-485: Samsung-T, Samsung-E, Pelco-D, Pelco-P, Panasonic, Bosch, Honeywell, Vicon , AD , GE Environmental Operating Temperature -10°C ~ +55°C (+14°F ~ +131°F) / Less than 90% RH...
Page 36
SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Chertsey, Surrey, UNITED KINGDOM KT16 OPS TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 Fax : +1-201-373-0124 www.samsungcctvusa.com...