12. TECHNICAL INFORMATION..................16 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
1.2 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Page 5
ENGLISH completed. There can be detergent on the dishes. • The appliance can release hot steam if you open the door while a programme operates. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. 2.5 Service •...
ENGLISH 4.1 Indicators Indicator Description Running programme indicator. It comes on when the programme starts and goes off when the programme is completed. End indicator. Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. 5.
6. SETTINGS 6.1 Programme selection However, if this does not happen, you can set the programme selection mode mode and user mode in the following way: When the appliance is in programme Press and hold the programme button selection mode it is possible to set a until the appliance is in programme programme and to enter the user mode.
ENGLISH How to set the water softener completed. By default this acoustic signal is deactivated but it is possible to level activate it. The appliance must be in programme How to activate the acoustic selection mode. signal for the end of 1.
7.1 The salt container 7.2 How to fill the rinse aid dispenser CAUTION! Only use salt specifically designed for dishwashers. The salt is used to recharge the resin in the water softener and to assure good washing results in the daily use.
ENGLISH Make sure that the appliance is in 1. Adjust the water softener to the programme selection mode. lowest level. • If the salt indicator is on, fill the salt 2. Set the rinse aid dispenser to the container. lowest position. •...
Make sure that there is detergent in the 1. Press the on/off button to deactivate detergent dispenser before you start a the appliance. new programme. 2. Close the water tap. If you do not deactivate the End of the programme appliance within 5 minutes all indicators goes off.
ENGLISH • Do not put in the appliance items that • The cap of the salt container is tight. can absorb water (sponges, • The spray arms are not clogged. household cloths). • There is dishwasher salt and rinse aid •...
7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).
ENGLISH • If you regularly use short duration we recommend to run long duration programmes, these can leave programmes at least 2 times per deposits of grease and limescale month. inside the appliance. To prevent this, 11. TROUBLESHOOTING If the appliance does not start or it stops With some problems the end indicator during operation, before you contact an flashes intermittently indicating a...
For alarm codes not described in the table, contact an Authorised Service Centre. 12. TECHNICAL INFORMATION Dimensions Width / Height / Depth 596 / 818-898 / 555 (mm) Voltage (V) 220-240 Electrical connection Frequency (Hz) Water supply pressure Min. / Max. bar (MPa) 0.5 (0.05) / 8 (0.8)