INSTRUCTIONS FOR USE PRODUCT DESCRIPTION PAGE REPLACING BULBS PAGE BEFORE USING THE REFRIGERATOR PAGE SAFEGUARDING THE ENVIRONMENT PAGE PRECAUTIONS AND GENERAL RECOMMENDATIONS PAGE HOW TO OPERATE THE REFRIGERATOR COMPARTMENT PAGE HOW TO DEFROST THE REFRIGERATOR PAGE CARE AND MAINTENANCE PAGE TROUBLESHOOTING GUIDE PAGE AFTER-SALES SERVICE...
PRODUCT DESCRIPTION A Low temperature compartment B Low temperature compartment door C Water collection tray D Adjustable shelves and grids E Crisper drawer F Temperature adjustment thermostat G Rating plate (at the side of the cripser drawer) H Adjustable foot Door seal spacers for transport purposes (remove and discard) REPLACING BULBS Replacing bulbs...
BEFORE USING THE REFRIGERATOR • Your new appliance is exclusively for • Keep this handbook for future consultation. domestic use. • After unpacking the appliance, make sure • The low temperature compartment can be that the door shuts properly. Any damage used to make ice cubes.
HOW TO OPERATE THE REFRIGERATOR COMPARTMENT Switching on the appliance Starting up the appliance • Plug in the appliance. • The inside light, where provided, switches on when the refrigerator door is opened. Adjusting the temperature Ensure the water collection tray, located below the low temperature compartment, touches the rear wall of the refrigerator unit.
HOW TO DEFROST THE REFRIGERATOR Defrost the appliance when the ice on the walls reaches a thickness of about 3 mm. Ensure the water collection tray is empty and properly positioned below the low temperature compartment. Semi-automatic defrost (Fig. 1) •...
TROUBLESHOOTING GUIDE 1. The appliance is not working. 4. The appliance is excessively noisy. • Is there a power failure? • Has the appliance been installed correctly? • Is the power cord in perfect condition? • Are the pipes at the back touching or vibrating? •...
ELECTRICAL CONNECTION For Great Britain only The wires in the mains lead are coloured in accordance with the following code: BLUE - “NEUTRAL” (“N”) BROWN - “LIVE” (“L”) GREEN AND YELLOW - “EARTH” (“E”) 1. The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the letter “E”...