Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita AN611
Summary of Contents for Makita AN611
- Page 1 INSTRUCTION MANUAL Construction Coil Nailer AN611 005235 IMPORTANT: Read Before Using.
-
Page 2: Specifications
) : 91 dB(A) Sound power level (L ) : 104 dB(A) Makita Corporation responsible Uncertainty (K) : 3 dB(A) manufacturer declare that the following Makita machine(s): Wear ear protection Designation of Machine: Construction Coil Nailer ENG904-1 Model No./ Type: AN611... -
Page 3: Save All Warnings And Instructions For Future Reference
30.1.2009 000230 Tomoyasu Kato Director Safety glasses Makita Corporation 3-11-8, Sumiyoshi-cho, Face shield Anjo, Aichi, 446-8502, JAPAN ENB067-4 Pneumatic nailer/stapler safety 000114 warnings Wear hearing protection to protect your ears against • WARNING Read all safety warnings and all exhaust noise and head protection. Also wear light instructions. - Page 4 Do not rush the job or force the tool. Handle the tool minimize friction-related wear. Wipe off all dust from • carefully. the parts. Do not activate the tool unless the tool is placed Ask Makita authorized service center for periodical • • firmly against the workpiece. inspection of the tool.
-
Page 5: Installation
To maintain product SAFETY and RELIABILITY, • Selecting air hose maintenance and repairs should be performed by Makita Authorized Service Centers, always using Makita replacement parts. SAVE THESE INSTRUCTIONS. WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. -
Page 6: Functional Description
1. Pneumatic tool 1. Door 2. Latch lever 3. Magazine cap 005237 005241 Lift and turn the coil support plate to set it to the • FUNCTIONAL DESCRIPTION correct step. When loading 57 or 65 mm long nails, use the bottom step. When loading 45 or 50 mm Adjusting depth of nailing long nails, use the middle step. -
Page 7: Operation
Do not place the contact element against the 1. Air fitting workpiece with excessive force. 2. Air socket B. Pull the trigger fully and hold it on for 1-2 seconds after nailing. For No. 1 method, set the change lever to the •... -
Page 8: Maintenance
Hook 1. Hook Humid Nail 004311 MAINTENANCE 005615 The hook is convenient for hanging the tool temporarily. This hook can be installed on either side of the tool. CAUTION: Always disconnect the air hose from the tool before CAUTION: • attempting to perform inspection or maintenance. - Page 9 If moisture is allowed to enter the tool, It may 004320 result in poor performance and possible tool failure. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be 1. Drain cock performed by Makita Authorized Service Centers, always using Makita replacement parts. 004317...
-
Page 10: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Nails • Air hoses • Safety goggles •... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884178-221...